• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.755-759
• /
• 2000

The determination of surface topography is believed to be extremely important in the areas of contact mechanics, adhesion and friction. In order to describe topography of various frictional surface. the wear test was carried out under different experimental conditions in dry friction. And fractal descriptors was applied to frictional surface of laser modified steel with image processing System. These descriptors to analyze surface structure are fractal dimension. Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Topography of frictional surface can be effectively obtained by fractal dimensions.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.35-41
• /
• 1999

Friction and wear test was performed for nylon, acetal resin, and PTFE(polytetrafluoroethylene) under reciprocating dry sliding conditions against a steel counterpart. Friction coefficient and specific wear rate were analysed as a function of sliding distance and applied load. The worn surfaces of plate and disc specimens were observed using SEM(Scanning Electron Microscopy). The experimental results show that acetal resin exhibited lowest wear rates whereas PTFE possessed lowest friction coefficient. The prominent wear mechanisms found were adhesion and abrasion.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.240-246
• /
• 1999

The determination of surface topography is believed to be extremely important in the areas of contact mechanics, adhesion and friction. In order to describe topography of various frictional surface, the wear test was carried out under different experimental conditions in dry friction. And fractal descriptors was applied to frictional surface of laser modified steel with image processing system. These descriptors to analyze surface structure are fractal dimension. Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Topography of frictional surface can be effectively obtained by fractal dimensions.

• 한국식품영양학회지
• /
• 제35권1호
• /
• pp.1-6
• /
• 2022

In this study, we developed a healthy snack using dried shrimp powder which is rich in calcium to help prevent bone disease. Different types of yanggaeng were prepared with varying ratios of dried shrimp powder; 1%, 3%, 5%, and 7%. Moisture content, color value, texture properties, and mineral concentration were measured. The L, a, and b chromaticity values showed significant differences in the 5% addition group (p<0.001). The texture properties, hardness, and adhesion decreased significantly as the amount of shrimp powder increased (p<0.001), while chewiness and elasticity significantly increased as the amount increased (p<0.001). Calcium and potassium increased significantly as the amount of shrimp powder increased (p<0.001).

• 콘크리트학회논문집
• /
• 제13권5호
• /
• pp.507-515
• /
• 2001

신.구 콘크리트 부착계면의 부착강도는 신 콘크리트에 라텍스를 이용하여 개선할 수 있다. 그러나, 현재까지 신.구 콘크리트 사이의 부착강도를 측정하기 위해 표준으로 채택되어진 실험은 아직 없다. 일축인장시험에서, 신.구 콘크리트 계면의 부착강도는 시험체의 파단 시 인장에 의해 실제적으로 구해진다. 본 연구에서 새로이 제시한 직접인장 부착강도 실험으로 라텍스 개질 콘크리트의 부착특성을 평가하고자 하였다. 새로이 제시되는 직접인발 부착강도 실험을 위하여 현장과 같은 조건의 슬래브를 제작하여 pull-out 실험을 실시하였으며, 기존의 시편을 이용한 직접인장 실험 시편을 제작하여 본 연구에서 사용하였다. 실험결과는 다음과 같다: 라텍스 혼입율 증가에 따라 부착강도는 증가하는 것으로 나타났다. 이를 통해 라텍스에 의한 부착력증진을 확인할 수 있었다. 또한, 기존 콘크리트의 표면처리에 따른 라텍스 개질 콘크리트의 부착특성을 평가한 결과, 표면처리에 따라 라텍스 개질 콘크리트의 부착강도가 개선되는 것으로 나타났다. 기존 콘크리트의 표면함수상태에 따른 라텍스 개질 콘크리트의 부착특성을 평가하기 위해서 다양한 표면함수상태에서 부착강도를 평가한 결과, 표면건조포화상태가 가장 이상적인 조건임을 알 수 있었다.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.109-116
• /
• 2022

Tire codes are made of materials such as hemp, cotton, rayon, nylon, steel, polyester, glass, and aramid are fiber reinforcement materials that go inside rubber to increase durability, driveability, and stability of vehicle tires. The reinforcement of the tire cord may construct a composite material using tires such as automobiles, trucks, aircraft, bicycles, and fibrous materials such as electric belts and hoses as reinforcement materials. Therefore, it is essential to ensure that the adhesive force between the rubber and the reinforced fiber exhibits the desired physical properties in the rubber composite material made of a rubber matrix with reinforced fibers. This study is a study on the heat treatment conditions for improving the adhesion strength of the tire cord and the reinforced fiber for tires. The core technology of the drying process is a uniform drying technology, which has a great influence on the quality of the reinforcement. Therefore, the uniform airflow distribution is determined by the geometry and operating conditions of the dryer. Therefore, this study carried out a numerical analysis of the shape of a drying nozzle for improving the performance of hot air drying in a dryer used for drying the coated reinforced fibers. In addition, the flow characteristics were examined through numerical analysis of the study on the change in the shape of the chamber affecting drying.

• 접착 및 계면
• /
• 제12권4호
• /
• pp.111-116
• /
• 2011

각종 산이나 알칼리에 부식되지 않고 내열성 및 방수, 방부, 방충 등에도 뛰어난 성질을 지니고 있는 천연수지인 옻을 토기 복원을 위한 접착제로 활용하기 위해 특성연구를 진행하였다. 옻의 경화조건인 고습(RH 75~85%) 또는 고온($120{\sim}170^{\circ}C$)이 아닌 일반적인 환경에서 접착제로 활용하기 위해 생칠에 어교 및 아교를 일정 비율로 첨가하였으며, 혼합 비율별 점도와 건조시간을 측정하고 인장강도 및 접착력 측정을 통해 적용가능성을 검토하였다. 실험 결과 생칠에 교(膠)를 첨가함으로써 상온, RH $50{\pm}5%$의 환경에서 건조가 가능하였고 어교보다 아교를 첨가한 시료에서 건조시간이 더 빠른 것으로 나타났다. 또한 교를 첨가함으로써 생칠보다 접착력이 더 증가하였다. 향후 토기 유물의 적용성 및 내후성에 대한 검증이 이루어진다면 친환경적인 전통접착제를 활용한 유물의 접합복원이 가능할 것으로 판단된다.

• 한국지반환경공학회 논문집
• /
• 제23권9호
• /
• pp.17-23
• /
• 2022

시멘트를 활용한 도로 기층은 경제적이며, 수정 및 보완이 용이하여 도로 포장 품질 관리가 우수하다. 또한, 시멘트는 점착력이 없는 사질토에 점착력을 부여하고 점성토에서는 점착력을 영구적으로 유지하는 역할을 하여, 강도 증가 및 압축률 감소 등의 내구성 향상의 장점으로 많이 활용되고 있다. 그러나 시멘트는 강도면에서 우수하나 건조수축에 의한 균열이나 파손이 발생하면 유지보수가 어렵고, 시멘트에서 용출되는 6가 크롬으로 인해 지반의 pH가 상승하여 지하수 오염과 같은 환경 문제가 발생하고 있다. 따라서 본 연구에서는 현장에서 발생하는 현장토와 시멘트계 고화재를 활용하여 환경성과 내구성을 고려한 도로 기층 대제재의 활용성을 평가하고자 한다. 도로 기층의 현장 적용성을 평가하기 위해 환경안정성실험 및 시멘트계 고화재를 일정 비율로 혼합하여 동결융해실험 및 습윤건조실험을 수행하였다. 실험범위는 시멘트계 고화재 10%, 20%, 30%의 배합비와 재령 기간 7일, 28일로 적용하여 시멘트계 고화재 혼합비율에 따른 조기 강도 및 기준 강도를 평가하였다.

• Restorative Dentistry and Endodontics
• /
• 제38권4호
• /
• pp.234-240
• /
• 2013

Objectives: This study evaluated the effects of intraradicular moisture on the pushout bond strength of a fibre post luted with several self-adhesive resin cements. Materials and Methods: Endodontically treated root canals were treated with one of three luting cements: (1) RelyX U100, (2) Clearfil SA, and (3) G-Cem. Roots were then divided into four subgroups according to the moisture condition tested: (I) dry: excess water removed with paper points followed by dehydration with 95% ethanol, (II) normal moisture: canals blot-dried with paper points until appearing dry, (III) moist: canals dried by low vacuum using a Luer adapter, and (IV) wet: canals remained totally flooded. Two 1-mm-thick slices were obtained from each root sample and bond strength was measured using a push-out test setup. The data were analysed using a two-way analysis of variance and the Bonferroni post hoc test with p = 0.05. Results: Statistical analysis demonstrated that moisture levels had a significant effect on the bond strength of luting cements (p < 0.05), with the exception of G-Cem. RelyX U100 displayed the highest bond strength under moist conditions (III). Clearfil SA had the highest bond strength under normal moisture conditions (II). Statistical ranking of bond strength values was as follows: RelyX U100 > Clearfil SA > G-Cem. Conclusions: The degree of residual moisture significantly affected the adhesion of luting cements to radicular dentine.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.123-132
• /
• 2000

The field of maxillofacial prosthetics is concerned with the prosthetic reconstruction of missing head and neck tissue. Currently, facial prostheses are usually applied in cases of defects caused by the surgical removal of tumors or congenital defects. While silicone has been most widely used for the reconstruction of missing maxillofacial defects, it does not have ideal physical properties. Therefore, bonding a thin polyurethane sheet to silicone prostheses was recommended. In this case skin adhesives were used for the retention of maxillofacial prostheses. But retention of devices has always been problematic. The contributions of implants can be made to solve these problems. Implants have reduced the need for adhesive use, simplifying cleaning procedures and thus extending the life of the prostheses. For implant-retained prostheses, retentive matrix is necessary to hold attachments and/or magnets. The retentive matrix is usually fabricated with autopolymerizing acrylic resin or visible light- polymerized resin. The purpose of this study was to compare the adhesion-in-peel force of silicone adhesive to autopolymerizing acrylic resin and polyurethane sheet with two different surface textures : pumice polish only or retention groove, and three surface primers : Dow corning 1205 primer or Dow corning S-2260 primer or FactorII A-304 primer, and two polymerization methods : room temperature or dry heat oven. The t-peel bond strength of specimens was determined as described in ASTM Standard D1876-72. The results were statistically analyzed using the ANOVA test, multiple range test and t-test The results were as follows. 1. The t-peel bond strength of A-304 primer was the highest and statistically higher than that of S-2260(p<0.05). 2. The t-peel bond strength of specimens with retention groove was statistically higher than that of specimens polished with pumice(p<0.05). 3. The t-peel bond strength of specimens polymerized in dry heat oven was statistically higher than that of specimens in room temperature(p<0.01).