Browse > Article
http://dx.doi.org/10.5764/TCF.2022.34.2.109

A Study on the Effect of the Shape of the Exhaust Port on the Flow and Temperature Distribution in the Drying Part of the MRG(Mechanical Rubber Goods) Reinforcing Yarn Manufacturing System  

Kim, Hwan Kuk (Korea Textile Machinery Convergence Research Institute)
Kwon, Hye In (Korea Textile Machinery Convergence Research Institute)
Do, Kyu Hoi (Korea Textile Machinery Convergence Research Institute)
Publication Information
Textile Coloration and Finishing / v.34, no.2, 2022 , pp. 109-116 More about this Journal
Abstract
Tire codes are made of materials such as hemp, cotton, rayon, nylon, steel, polyester, glass, and aramid are fiber reinforcement materials that go inside rubber to increase durability, driveability, and stability of vehicle tires. The reinforcement of the tire cord may construct a composite material using tires such as automobiles, trucks, aircraft, bicycles, and fibrous materials such as electric belts and hoses as reinforcement materials. Therefore, it is essential to ensure that the adhesive force between the rubber and the reinforced fiber exhibits the desired physical properties in the rubber composite material made of a rubber matrix with reinforced fibers. This study is a study on the heat treatment conditions for improving the adhesion strength of the tire cord and the reinforced fiber for tires. The core technology of the drying process is a uniform drying technology, which has a great influence on the quality of the reinforcement. Therefore, the uniform airflow distribution is determined by the geometry and operating conditions of the dryer. Therefore, this study carried out a numerical analysis of the shape of a drying nozzle for improving the performance of hot air drying in a dryer used for drying the coated reinforced fibers. In addition, the flow characteristics were examined through numerical analysis of the study on the change in the shape of the chamber affecting drying.
Keywords
reinforcement fibers; dry nozzle shape; adhesion; tire cord; chamber;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 K. S. Baek, H. J. Won, J. B. Park, S. C. Choi, and H. H. Cho, Effect of Drawing on Fine Structure of Undrawn PET Tire Core Filament, Journal of Korea Fiber Society, 28(6), 50(1991).
2 C. J. Moon, Fine Structure and Physical Properties of Poly(ethylene terephthalate) Fiber for Tire Cord in Process Conditions, M.S. Thesis, Pusan National University, 2003.
3 T. Berrin, Investigation of Twisted Monofilament Cord Properties made of Nylon 6.6 and Polyester, Fibers and Polymers, 12(8), 1091(2011).   DOI
4 J. Y. Yu, K. Koo, and S. S. Kim, The Limitation and Current Situation of the Chemical Water Repellent Oil Repellent Treatment on Polymer Surface, Textile Coloration and Finishing, 17(5), 61(2005).
5 S. Soltani, G. Naderi, and S. H. Mohseniyan, Mechanical Morphological and Rheological Properties of Short Nylon Fiber Reinforced Acrylonitrile-butadiene Rubber Composites, Fibers and Polymers, 15(11), 2360(2014).   DOI
6 T. Kim, C. Bao, and S. Kim, Optimal Design of Sixing Machine by Thermal Flow Consideration, Journal of Korea Fiber Society, 35(6), 338(1998).
7 A. Cay, I. Tarakcioglu, and A. Hepbasli, Assessment of Finishing Process by Exhaustion Principle for Textile Fabrics: An Exegetic Approach, Applied Thermal Engineering, 29, 2554(2009).   DOI
8 A. Cay, I. Tarakcioglu, and A. Hepbasli, Exegetic Performance Assessment of a Stenter System in a Textile Finishing Mill, International Journal of Energy Research, 13, 1251(2007).
9 D. H. Chun, S. W. Park, and J. H. Kim, A Numerical Study for Design Optimization of Nozzle Injection Angle in Tenter Machine, Textile Coloration and Finishing, 25(2), 134(2013).   DOI
10 K. H. Lee, Y. H. Bang, J. B. Park, and H. H. Cho, Fine Structure and Physical Property of Nylon Tire Core with Repeated Extension Fatigue, Journal of Korea Fiber Society, 34(8), 489(1997).
11 D. H. Cho, S. J. Kim, and D. H. Chang, Effects of Heat Temperature in Sizing and Pretreatment Processes on the Appearance Colour of the Polyester Fabrics, Textile Coloration and Finishing, 11(2), 1(1999).
12 M. Andideh, G. Naderi, and S. Soltani, Effects of Nanoclay and Short Nylon Fiber on Morphology and Mechanical Properties of Nanocomposites Based on NR/SBR, Fibers and Polymers, 15(4), 814(2014).   DOI
13 J. H. Lee, K. W. Lee, and Y. H. Byon, Study on the Mechanical Properties of Compounding Chopped Fiber and Rubber, Textile Coloration and Finishing, 28(3), 183(2016).   DOI
14 K. J. R. Bathe, H. Zhang, and S. Ji, Finite Element Analysis of Fluid Flows Fully Coupled with Structural Interactions, In Computers and Structures, 72, 1(1997).   DOI
15 A. B. Etemoglu, M. K. Isman, and M. Can, Investigation into the Effect of Nozzle Shape on the Nozzle Discharge Coefficient and Heat and Mass Transfer Characteristics of Impinging Air Jets, Heat Mass Transfer, 46, 1395(2010).   DOI
16 K. W. Kim, J. W. Lee, J. S. Jang, M. S. Jeong, J. Y. Oh, H. Kang, J. H. Kang, H. G. Kim, and W. S. Yoo, Determination of Tensile Forces to Enhance the Supply Stability of Reinforced Fiber, Journal of Mechanical Science and Technology, 30(12), 5413(2016).   DOI