• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.119-129
• /
• 2014

PURPOSES : This investigational survey is to observe a proper spatial aggregation method for path travel time estimation using the hi-pass DSRC system. METHODS : The links which connect the nodes of section detectors location are used for path travel time estimation traditionally. It makes some problem such as increasing accumulation errors and processing times. In this background, the new links composition methods for spatial aggregation are considered by using some types of nodes as IC, JC, RSE combination. Path travel times estimated by new aggregation methods are compared with PBM travel times by MAE, MAPE and statistical hypothesis tests. RESULTS : The results of minimum sample size and missing rate for 5 minutes aggregation interval are satisfied except for JC link path travel time in Seoul TG~Kuemho JC. Thus, it was additionally observed for minimum sample size satisfaction. In 15, 30 minutes and 1 hour aggregation intervals, all conditions are satisfied by the minimum sample size criteria. For accuracy test and statistical hypothesis test, it has been proved that RSE, Conzone, IC, JC links have equivalent errors and statistical characteristics. CONCLUSIONS : There are some errors between the PBM and the LBM methods that come from dropping vehicles by rest areas. Consequently, this survey result means each of links compositions are available for the estimation of path travel time when PBM vehicles are missed.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.113-118
• /
• 2010

"Domestic delivery service" is defined the service to deliver goods or packages from point of senders to point of receiver. With the characteristics of door to door, it is must a service provider should know the exact location of destination assuring best utilization of moving path. Generally, location information consist of postal code and address only, which result in difficulties to identify the precise location of destination. It is relatively less correlated between the information that address refers and practical location in Korea address system. For example, the next door to house number 100 is not always house number 101. Therefore, a delivery man additionally uses a paper map or a GPS navigation which carry extra job to input every code of location to the device in order to know precise location. It is also very inconvenient that every delivery man identify the location that address information refers and make a personal decision of the optimum moving path dropping each destination without calculating provisioning process of whole delivery path. As explained above, it is inefficient to find information delivery service required and to generate the optimum path. In results, these difficulties bring in delay of service and increase of cost. In this point, the contents of the thesis suggest a GPS navigation system easy to obtain accuracy of delivery information which enables to automate optimum moving path based on RFID which contains location information.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.18-28
• /
• 2012

This study was to develop a novel automatic system for measuring St$\ddot{o}$ckigt sizing degree and contact angle at a time. The conventional methods to measure sizing degree had serious problems in obtaining significant differences according to different dosages of a sizing agent, and moreover they disclosed unique limitation due to liquid types used and tester's subjectivity. However, the newly developed system could get reproducible results through total automation of all procedures including liquid dropping, image acquisition and measurement of both St$\ddot{o}$ckigt sizing degree and contact angle. For the St$\ddot{o}$ckigt sizing test, the automatic system could measure sizing degree with more definite differences according to different dosage of AKD, compared to the conventional method. For the contact angle test, the automatic system showed a similar trend to the conventional method but had smaller contact angles due to distortion of an image focus by a sheet curl than the conventional testing machine. The problem from the image out of focus due to specimen curl will be overcome with adopting a new specimen holder for the future system.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.1
• /
• pp.61-66
• /
• 2013

Baculum elongatum has several peculiarities such as parthenogenesis, unique external features, changing body color, and dropping oviposition, which makes it a potential economically useful insect. Oviposition was performed by females without fertilization by the sperm of males. The oviposition period was $42.2{\pm}22.7$ days and the number of eggs per female was $109.5{\pm}70.5$ eggs. The hatch rate was 73.3% at $25^{\circ}C$ and 66.7% after low temperature treatment ($8^{\circ}C$ for 60 days). In nature, B. elongatum overwinters as an egg, but it can be assumed from the results that cold temperatures were not required for hatching. The hatch rate was 98.2% in the treatment using floral foam, fermented sawdust, and leaves. The developmental period was $100.9{\pm}4.2$ days for eggs, $55.3{\pm}4.6$ days for nymphs, and $49.7{\pm}16.0$ days for adults. The length of the eggs was $0.33{\pm}0.0$ cm and the lengths of the nymphs were clearly distinguishable according to the instar stage. Clover(Trifolium repens) was an excellent diet as it was similar to the host plant and could be used as an alternative diet. The rate of reaching adulthood for the insects was 66.7% on an artificial diet containing 25% acacia leaves. For sustainable mass rearing of nymphs or adults of B. elongatum, a natural diet could be used such as acacia (Robinia pseudoacacia), white oak (Quercus aliena), chestnut (Castanea crenata var. dulcis), and bush clover (Lespedeza bicolor), or an alternative diet such as clover or artificial diet.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.2653-2657
• /
• 2015

Nasopharyngeal carcinoma (NPC) is the second most common neoplasm of head and neck in Tunisia. The distribution is bimodal with a first period occurrence between 15 and 20 years old and a second peak at around 50 years of age. Undifferentiated carcinoma of nasopharynx type III (UCNT) is the predominant histological type (93.4%). Data of cancer registry of North Tunisia confirmed that it is an intermediate risk area for NPC with overall ASRs of 3.6 and 1.6/100,000 respectively in males and females. This study aimed to present the evolution of incidence rate of nasopharyngeal carcinoma over a period of 12 years (1994-2006). Data of cancer registry of North Tunisia (NTCR), covering half of the Tunisian population, were used to determine evolution of NPC incidence, calculated by 5 year periods. The estimated annual percentage change (EAPC) was used as an estimate of the trend. To best summarize the behavior or the data trend across years, we used a join-point regression program. Between 1994 and 2006, we observed negative annual average change of standardized incidence in men and women (-3.3%and -2.7%) also for the standardized incidences which showed a rather important decline (26.4% in males and 22.3% in females). The truncated age standardized incidence rate of NPC in adults aged of 30 years old and more (N= 1209) decreased by -0.4% per year from 1994 to 2006 over time in north Tunisia dropping from 6.09 to 4.14 person-years. However, the rate was relatively stable during this period among youths aged 0-29 years (N= 233) in both sexes. NPC demonstrated a favorable evolution from 1994-2006 probably due to a improvement in socioeconomic conditions.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.31-41
• /
• 2020

This study analyzed parents' school satisfaction longitudinally using data from the 1st, 3rd, and 5th wave data of the Korea Education Longitudinal Study(KELS)2013. The subjects of analysis are parents who responded without dropping out in the first, third and fifth panel of the KELS2013, and 4,227 cases that had no missing values in the variables were selected for the sample to input for analysis of the latent growth modeling(LGM). As a result, it is confirmed that the parents' education, educational support, and children's academic achievement have a positive effect on the parents' school satisfaction. But the parents' educational view and education cost have a negative effect on that. The results of this study are expected to be important information to help enhance the primary function of the school.

• Advances in Traditional Medicine
• /
• v.5 no.2
• /
• pp.150-155
• /
• 2005

Aqueous extract of antidiarrhoeal formulation (ADF) containing Holarrhena antidysentrica, Aegle marmelos and Punica granatum was investigated for antidiarrhoeal activity against charcoal-induced gut transit, serotonin-induced diarrhoea and $PGE_2-induced$ small intestine enteropooling in rats. The control, standard and test groups of experimental animals were administered with normal saline (p.o.), diphenoxylate hydrochloride (5 mg/kg, p.o.) and ADF (250 mg and 500 mg/kg, p.o.) respectively except the control group of $PGE_2-induced$ small intestine enteropooling which received only 5% ethanol in normal saline (i.p.). Charcoal (10 ml/kg, p.o.) and serotonin $(600\;{\mu}g/kg,\;i.p.)$ were administered after 30 min, while $PGE_2\;(100\;{\mu}g/kg,\;p.o.)$ was administered immediately afterwards. The distance traveled by charcoal in small intestine was measured after 15 and 30 min of charcoal administration, diarrhoea was observed every 30 min for six hour after serotonin administration and the volume of intestinal fluid was measured after 30 min of $PGE_2$ administration. Oral administration of ADF significantly inhibited the frequency of defaecation and decreased the propulsion of charcoal meal through the gastrointestinal tract, reduced the wetness of faecal dropping in serotonin-induced diarrhoea and also reduced the $PGE_2-induced$small intestine enteropooling. ADF may have potential to reduce the diarrhoea in rats.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.704-707
• /
• 1997

The preparation of alumina sol for fine chemical field from kaolin-derived aluminum sulfate solution is performed. Noncrystalline AlO(OH) was prepared by dropping ammonia water into aluminum sufate solution with stirring. Acetetic acid was added to form the electrical double layers on the particle surface of the slurry, which resulted in a stable sol. The influence of the reaction temperature, reaction time, acetetic acid concentration on the preparation of alumina sol were investigated. Dispersed colloid particles of AlO(OH) were prepared at the reaction temperature of $50{\sim}90^{\circ}C$ and 1.6 A/C = 1.6 (molar ratio), regardless of the reaction time. Stable alumina sol having a particle size of about 5~10 nm was prepared in the range 1~5 vol% alumina content.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1458-1465
• /
• 2010

A lot of dredging and reclaming projects are recently under way in Korea for the efficient use of limiting land space. Saemanguem area is special case of reclaiming by dredged soil. In case of a confined disposal of dredged soils by a pump dredger, generally coarse grained soils are separated from fines with dropping at the near part of the pump dredger. This kind of seperation of fine contents could be a factor of liquefaction by earthquake. In Korea, recently, earthquakes with magnitude of 3.0 or higher are distinctively increasing in 1990. In this study, cyclic shear characterics of Saemanguem Dredged sand depending on fine content were analyzed. A series of undrained cyclic triaxial test with cyclic stress ratio ($\sigma_d/{2\sigma_{{\upsilon}c}}'$) were performed on both isotropic consolidated specimen and sand with fine contents of 0%, 5%, 15%, 30%, 40% under the effective vertical stress of 100kPa and 50% and 60%, 70% of relative density for fine content of 0%, respectively. In the test results, cyclic shear strength increased by increasing of cyclic stress ratio($\sigma_d/{2\sigma_{{\upsilon}c}}'$) with increasing the relative density at the same number of cyclic under the effective confining pressure of 100kPa. It is almost highest the double amplitude(DA) 1%, 3%, 5%, 7.5% and 10% at fine content of 15% between Cyclic stress ratio($\sigma_d/{2\sigma_{{\upsilon}c}}'$) value at cyclic number five and fine content. Number of cyclic is 30 under the effective vertical stress of 100kPa, 70% of relative density for fine content of 15%. when the cyclic stress ratio at each relative density was compared at cyclic number five, the double amplitude(DA) 1%, 3%, 5%, 7.5% and 10%, and the pore-pressure ratio (${\Delta}u/{\sigma'}_c$) 0.95 value were compared; under the relative density of 70% and the effective confining pressure of 100kPa. The pore-pressure ratio (${\Delta}u/{\sigma'}_c$) 0.95 value showed a similar trend to the double amplitude (DA) 5% line.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.