• 화약ㆍ발파
• /
• 제20권4호
• /
• pp.5-15
• /
• 2002

발파, 항타와 같은 소원음이 존재하는 건설현장에서의 소음저감대책으로는, 소음원 또는 수음점에 방음벽을 설치하여 전파되는 소음을 차단하는 것이 가장 경제적인 경우가 대부분이다. 이러한 방음벽은 소음설계와 구조설계를 통해 그 규모가 결정되며, 방음벽의 구조적 안전을 보장하기 위해서는 KS F4770에 의한 방음판의 구조적 품질이 보장되어야 한다. 본 논문에서는 이 중 금속재 흡음형 방음벽 관련 규정인 F4770-1 - 2001을 분석하여, 그 문제점을 지적하고, 수정 또는 개선 사항을 제시하였다. 분석결과, 보다 경제적인 방음벽의 설치를 위하여 하중의 세분화와 함께 시험방법의 개선이 필요한 것으로 나타났다. 이와 함께 독일의 방음벽 설계시 사용되는 규정인 ZTV-Lsw 88과 비교, 검토하였으며, 검토 결과, 한국 규정은 독일규정에 비해, 보수적인 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.661-666
• /
• 2000

Optimization of the elastic joint of train is performed according to the minimization of ten responses which represent driving safety and ride comfort of train and analyzed by using the each response se surface model from stochastic design of experiments. After the each response surface model is constructed, the main effect and sensitivity analyses are successfully performed by 2nd order approximated regression model as described in this paper. We can get the optimal solutions using by nonlinear programming method such as simplex or interval optimization algorithms. The response surface models and the optimization algorithms are used together to obtain the optimal design of the elastic joint of train. the ten 2nd order polynomial response surface models of the three translational stiffness of the elastic joint (design factors) are constructed by using CCD(Central Composite Design) and the multi-objective optimization is also performed by applying min-max and distance minimization techniques of relative target deviation.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1187-1194
• /
• 2009

During the last decade, possibility of flaw occurrences has been rapidly increased world-widely as the increase of operating times of petro-chemical facilities. For instance, from a recent in-service inspection, three different sized surface cracks were detected in welding parts of a spherical oxygen holder in Korea. While API579 code provides corresponding engineering assessment procedures to determine crack driving forces, in the present work, numerical analyses are carried out for the cracked oxygen holder to investigate effects of complex geometry, analysis model and residual stress. With regard to the detailed finite element analysis, stress intensity factors are determined from both the full three-dimensional model and equivalent plate model. Also, as an alternative, stress intensity factors are calculated for equivalent plate model by employing the noted influence stress function technique. Finally, parametric structural integrity evaluation of the cracked oxygen holder is conducted in use of failure assessment diagram method, J/T method and DPFAD method. Effects of the geometry and so forth are examined and key findings from the simulations are fully discussed, which enables to determine practical safety margins of spherical components containing a defect.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.113-118
• /
• 2020

Recently, eco-friendly electric motorcycles have been considered to replace aging gasoline motorcycles to reduce the amount of suspended fine dust in air. However, existing rechargeable battery-powered electric motorcycles have been found unacceptable by users because of their many limitations, such as long charging time, short travel distance per charge, and low driving speed. To overcome the drawbacks of conventional electric motorcycles, this paper proposes an exchangeable battery-powered electric motorcycle and a new frame shape for housing the exchangeable battery. The proposed frame is similar to that of current electric motorcycles; however, the shape and position of the saddle support, battery, and controller mount section are redesigned. The safety of the presented frame is verified through static and dynamic analyses using ABAQUS. In particular, the dynamic analysis is conducted under the most extreme condition among the various operating situations, thus confirming the robustness of the proposed frame design.

• Earthquakes and Structures
• /
• 제18권1호
• /
• pp.73-82
• /
• 2020

With the coal mining depth increasing, both stress and gas pressure rapidly enhance, causing coal and gas outburst risk to become more complex and severe. The conventional method for prediction of coal and gas outburst adopts one prediction index and corresponding critical value to forecast and cannot reflect all the factors impacting coal and gas outburst, thus it is characteristic of false and missing forecasts and poor accuracy. For the reason, based on analyses of both the prediction indicators and the factors impacting coal and gas outburst at the test site, this work carefully selected 6 prediction indicators such as the index of gas desorption from drill cuttings Δh₂, the amount of drill cuttings S, gas content W, the gas initial diffusion velocity index ΔP, the intensity of electromagnetic radiation E and its number of pulse N, constructed the Bayes discriminant analysis (BDA) index system, studied the BDA-based multi-index comprehensive model for forecast of coal and gas outburst risk, and used the established discriminant model to conduct coal and gas outburst prediction. Results showed that the BDA - based multi-index comprehensive model for prediction of coal and gas outburst has an 100% of prediction accuracy, without wrong and omitted predictions, can also accurately forecast the outburst risk even for the low indicators outburst. The prediction method set up by this study has a broad application prospect in the prediction of coal and gas outburst risk.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.175-182
• /
• 2021

도로교통 소음문제가 이슈가 되면서 저소음포장이 등장하게 되었고 저소음포장의 소음저감효과를 설명하면서 일반 포장과의 소음차이를 많이 사용한다. 그러나 일반포장도 포장의 종류에 따라 공용연수에 따라 타이어노면 소음은 달라진다. 본 연구에서는 저소음포장의 소음저감 효과를 평가할 때 사용할 수 있는 일반 아스팔트포장의 타이어 소음의 속도별, 공용연수별 대푯값을 평가하는 것이다. 조사방법으로는 국도의 전체 포장을 관리하고 있는 국도포장관리시스템의 데이터베이스에서 수도권 지역의 49개 구간을 선정하고 근접소음 측정방법(CPX; Close Proximity Method)으로 50km/h부터 80km/h까지 10km/h단위로 측정하였다. 측정결과 시공직후의 소음특성은 1년 이상 경과한 소음특성과 달라 별도로 처리하였으며 이상치 자료를 제거하면 공용연수가 증가함에 따라 소음이 증가하는 경향을 얻을 수 있었다. 또한 속도별 연도별 소음증가 수준은 모든 소음수준에서 신뢰성 있는 경향을 얻을 수 있었다. 공용연수와 주행속도에 관한 두 가지 회귀분석을 통해 일반 아스팔트포장의 공용연수별 속도별 대표 소음값을 얻었다. 이 결과로부터 일반 아스팔트포장에서 공사초기와 시공후 6년이 경과한 아스팔트포장은 평균 6dB정도 차이가 나는 것으로 나타났다. 일반 아스팔트포장의 대표 소음값은 불변하는 것이 아니라 저소음포장과의 상대적인 비교를 위해서 필요한 것이다. 이러한 일반 아스팔트포장의 대표 소음값을 기준으로 일반 아스팔트포장에 대한 포장종류별 타이어 노면 소음특성에 대한 연구도 필요하다.

• Journal of Contemporary Eastern Asia
• /
• 제19권1호
• /
• pp.59-83
• /
• 2020

This paper examines the actions and the factors driving those actions to reduce energy consumption and enhance energy efficiency taken by United States cities. While not much empirical evidence is available on why governments pursue practical sustainability actions, we attempt to shed more light on this important topic by empirically identifying factors that contribute to concrete actions toward sustainability policies. We adopt political market theory as a basic theoretical framework with policy-making applied to city energy consumption. Using the 2010 ICMA (local government sustainability policies and program) data, this study expands the focus of analyses to evaluate the effect of the form of government on energy consumption and energy efficiency by using multiple regression analysis. The findings show that at the city level, the mayor-council form of government are negatively associated with governments' efforts to reduce energy consumption. However, cities with at-large elections and municipal ownership are more likely to adopt sustainability actions. We also find that a large-scale economy has significant effects on the effort to reduce city energy consumption and improve energy efficiency. This shows that environmental policies are directly connected to locally relevant affairs, including housing, energy use, green transportation, and water. Thus, local level administrators could take an executive role to protect the environment, encourage the development of alternative energy, and reduce the use of fossil fuel and coal energy. These efforts can lead to important environmental ramifications and relevant actions by municipal governments.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.100-109
• /
• 2020

Pipelines subjected to ground movement would be easily exposed to large-scale deformation. Since such deformations may cause the pipeline failure, it is important to ensure the safety of pipelines in various operation conditions. However, crack in weld metal have been considered as one of the main causes that can deteriorate the structural integrity of the pipeline. For this reason, the structural integrity of the pipe containing the crack in the weld should be obtained. In order to assess cracked pipe, J-integral and crack-tip opening displacement(CTOD) have been applied widely as the elastic-plastic fracture mechanics parameters representing crack driving force. In this study, engineering solutions to calculate the J-integral and CTOD of pipes with a circumferential outer surface crack in the weld are proposed. For this purpose, 3-dimensional elastic-plastic finite element(FE) analyses have been performed considering the effect of overmatch and width of weld. The shape of the weld was simplified to I-groove, and axial displacement was employed as for loading condition. Based on FE results, the effects of crack size, material properties and width of weldment on J-integral and CTOD were investigated. Additionally, the J-integral and CTOD for I-groove were compared with those for V-groove to examine the effects of the weld shape, and a proportionality coefficient of J-integral and CTOD was calculated from the results of this paper.

• 한국통신학회논문지
• /
• 제39B권3호
• /
• pp.169-179
• /
• 2014

차량 간 통신을 이용한 안전 서비스 제공을 위해서 차량 간에 서로의 위치정보 획득이 중요한 이슈가 되고 있다. 이를 위해서 주기적으로 메시지를 발생 시키고 주변 차량의 위치 변화를 감지하여 운전자에게 안전 서비스를 제공한다. 하지만 차량의 밀도가 높은 환경에서 주기적인 위치정보 메시지의 잦은 발생으로 인해 네트워크 채널이 포화 상태가 되어 송/수신에 문제가 발생한다. 본 논문은 시분할 슬롯을 이용하여 브로드캐스팅하며 차량의 속도를 이용하여 도로 위 차량 밀도를 예측하여 시분할 슬롯의 수, 전파세기를 조절하여 향상된 통신 상태를 만드는 방법을 제안한다. 네트워크 시뮬레이터를 통한 성능 평가 결과, 기존의 경쟁 모드에서 브로드캐스팅 했을 때 보다 수신율은 약 40%의 향상 보여주었고 채널 접근 시간은 10ms에서 0.23ms 로 감소한 것을 확인 할 수 있었다.

• 한국재난정보학회 논문집
• /
• 제9권2호
• /
• pp.188-194
• /
• 2013

철도의 고속화가 진행됨에 따라 보다 경제적인 고속선용 교량 시스템의 개발을 위한 연구가 활발히 진행되고 있다. 이 논문에서는 기존의 프리스트레싱기법에 새로운 방식으로 추가적인 프리스트레스를 도입할 수 있는 바이프리스트레싱기법을 이용한 신형식 거더를 소개하였다. 추가적인 인장력은 단면 상부에 설치된 강봉 사이에 쐐기형 핀바를 삽입하여 도입할 수 있다. 신형식 거더가 적용된 철도교량의 고속선 적용성은 동적해석을 통한 안정성 검토를 통하여 수행하였다. 동적안정성 검토는 30m, 35m 및 40m 경간의 교량시스템에 대한 KTX 이동하중해석을 통하여 수행하였다. 검토 결과 개발된 교량은 구조적 안정성, 주행안전성, 승차감 확보를 위하여 검토되고 있는 제한값을 모두 만족하는 것으로 나타났다.