• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.4
• /
• pp.351-358
• /
• 2015

In the recent times, the use of gasoline direct injection (GDI) engines has been regarded as a means of enhancing conformance to emission regulations and improving fuel efficiency. GDI engines have been widely adopted in the recent years for their better engine performance and fuel economy compared to those of conventional MPI gasoline engines. However, they present some disadvantages related to the mass and quantity of particulate matter generated during their use. This study investigated the nanoparticle characteristics of the particulate matter exhausted from a GDI engine vehicle installed with different types of gasoline particulate filters, after subjecting it to ultra-lean burn driving conditions. Three metal foam and metal fiber filters were used for each experimental condition. The number concentrations of particles were analyzed for understanding their behavior, and the reduction characteristics were obtained for each type of filter.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.274-280
• /
• 2005

Experimental investigations were carried out in an atmospheric pressure, optically accessible and laboratory-scale dump combustor. The objective of this study is to obtain the phase-resolved gas temperatures at different phases of the oscillating pressure cycle during unstable combustion. To see the effect of incomplete fuel-air mixing on phase-resolved temperature characteristics, CARS temperature measurements were performed. Results including phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs) were provided in this paper. It could be found that the profile of mean temperature showed the in-phase relationship with pressure cycle. Temperature PDFs give an insight on the flame behavior as well as NOx emission characteristics. These results would be expected to play an important role in better understanding of driving mechanisms and thermo-acoustic interactions.

• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.145-150
• /
• 2008

The objective of this research is to design the roller rig for the maintenances of high-speed train bogies operated on the tracks. Roller rigs have been studied and researched to develop the faster, safer and more efficient railway system. It is to reduce the time of testing vehicles and to make as wide a range of tests available as possible. Therefore, it is very important issue to check and evaluate the dynamic responses of high-speed train after several years of operation. This paper presents a study on the conceptual design and dynamic model to develop the roller rig for the routine maintenances of high-speed trains bogies with maximum speed of 350km/h. ANSYS was used to analyze the wheel/roller's contact behavior of driving axle and ADAMS was used to verify and analyze the dynamic behaviors of roller rig.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.7-18
• /
• 2007

There are few studies on air pollution due to vehicle emissions in spite of the importance of this field. Therefore, this study describes trends and suggests implications through analysis relating to existing emissions research. This study has been divided into three areas. The first part is about estimating vehicle emissions. In this part, the authors analyze limits in ways of calculating emissions in the existing macroscopic view and then suggest the development of a model for calculating emissions considering velocity and acceleration. These variables are a function of traffic and individual driving behavior in the microscopic view. The second part is about management techniques for reducing vehicle emissions. The traffic management techniques for reducing vehicle emissions should conform to regional characteristics. The final part is about traffic operation for reducing vehicle emissions. The authors suggest the development of a micro-simulator and then the development of strategies for traffic operation. It is necessary to design better models estimating emissions and then, using real time data, to make a monitoring system simulating emission rates. This study serves as a literature review to make a foundation for further research about emissions research for transportation engineering.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.166-173
• /
• 2006

In this study, a probe array has been developed for use in a data storage device that is based on scanning probe microscope (SPM) and MEMS technology. When recording data bits by poling the PZT thin layer and reading them by sensing its piezoresponse, commercial probes of which the tip heights are typically shorter than $3{\mu}m$ raise a problem due to the electrostatic forces occurring between the probe body and the bottom electrode of a medium. In order to reduce this undesirable effect, a poly-silicon probe with a high aspect-ratio tip was fabricated using a molding technique. Poly-silicon probes fabricated by the molding technique have several features. The tip can be protected during the subsequent fabrication processes and have a high aspect ratio. The tip radius can be as small as 15 nm because sharpening oxidation process is allowed. To drive the probe, electrostatic actuation mechanism was employed since the fabrication process and driving/sensing circuit is very simple. The natural frequency and DC sensitivity of a fabricated probe were measured to be 18.75 kHz and 16.7 nm/V, respectively. The step response characteristic was investigated as well. Overshoot behavior in the probe movement was hardly observed because of large squeeze film air damping forces. Therefore, the probe fabricated in this study is considered to be very useful in probe-based data storages since it can stably approach toward the medium and be more robust against external shock.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.257-267
• /
• 2003

For the treatment of reactive phenolic resin waste, a simulation model of pervaporative dehydration process has been developed through hollow fiber membrane module. Some of basic parameters were determined directly from dehydration of the waste liquid through a flat sheet membrane to get realistic values. The simulation model was verified by comparing the simulated values with experimental data obtained from hollow fiber membrane module. Hollow fiber membranes with active layer coated on inside fiber were used, and feed flew through inside hollow fiber. Feed flow rate affected membrane performances and reaction by providing a corresponding temperature distribution of feed along with fiber length. Feed temperature is also a crucial factor to determine dehydration and reaction behavior by two competing ways; increasing temperature increases permeation rate as well as water formation rate. Once the permeate pressure is well below the saturated vapor pressure of feed, permeate pressure had a slightly negative effect on permeation performance by slightly reducing driving force. As the pressure approached the vapor pressure of feed, dehydration performances declined considerably due to the activity ratio of feed and permeate.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.101-110
• /
• 2000

본 논문의 목적은 우리들의 현실적 노면표지 형태가 그 강도, 종류 및 출현빈도 측면에서 드러내는 지속적 증대 내지 강화 경향성을 문제점으로 제기하면서, 이런 노면표지 형태와 운전행동 간의 관련성에 대한 심리학적 제반 이론들을 고찰해보고 아울러 여기서 상호 연관적 특성을 밝혀주는 하나의 적절한 모델을 개발해보고자 하는 데에 두었다 이 모델에서는 운전자의 사고예방이나 안전운행이 곡 필요한 수준의 노면표지 자극화(stimulation)를 통해 조성된 쾌적한 교통환경에서 보다 용이하게 가능하다는 점이 전제되고 있다. 우리가 인간행동을 총체적으로나 효과적으로 분석하는 데 있어서는 일반심리적이거나 행동주의적 제반 이론 관점이 다소 미흡하다는 점이 지적되었다. 반면에 보다 거시적이고 종합적인 통찰에 중점을 두고있는 형태주의 심리학이나 장 이론적 시각은 행동분석 시에 비교적 결실적인 것으로 밝혀졌다 노면표지 자극의 양상여하가 운전자에게 스트레스, 정보과부담, 과도한 심리적 각성상태 등으로 인해 부정적인 영향을 미친다는 점에서는 이런 문제점이 환경심리학적 고찰측면에서도 관심의 대상이 되고 있다. \"노면표지 조성화 양 관점 모델\"에서 시사되고 는 터이지만. 이 모델에서의 노면표지 형태가 이론적인 면에서 \"정서-인지적\" 인간관에 근거를 두고있어 궁극적으로 이것이 옳다면, 그것은 곡 필요한 최소한의 수준에 머물러야 한다는 것이다. 올바른 운전행동, 다시 말해 교통법규 준수 행동은 노면표지 양상 측면의 각종 자극적 강화대책보다도 오히려 실효성 있는 교통교육, 확실한 적발 단속과 엄중한 처벌대책에 상대적으로 훨씬 더 큰 비중을 두고있는, 바로 그런 운전자의 의식개혁을 통해 비로소 제대로 정착될 수 있기 때문이다. 이 모델의 타당성 여부는 후속적 실증연구를 통해 해명되어질 수 있을 것이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.1
• /
• pp.52-58
• /
• 2006

Single-electron transistor (SET)-based logic cells and SET/FET hybrid integrated circuits have been fabricated on SOI chips. The input-output voltage transfer characteristic of the SET-based complementary logic cell shows an inverting behavior where the output voltage gain is estimated to be about 1.2 at 4.2K. The SET/FET output driver, consisting of one SET and three FETs, yields a high voltage gain of 13 and power amplification with a wide-range output window for driving next circuit. Finally, the SET/FET literal gate for a multi-valued logic cell, comprising of an SET, an FET and a constant-current load, displays a periodic voltage output of high/low level multiple switching with a swing as high as 200mV. The multiple switching functionality of all the fabricated logic circuits could be enhanced by utilizing a side gate incorporated to each SET component to enable the phase control of Coulomb oscillations, which is one of the unique characteristics of the SET-based logic circuits.

• Structural Engineering and Mechanics
• /
• v.65 no.2
• /
• pp.129-139
• /
• 2018

Post-tensioning (PT) tendons are commonly used for the assembly of modularized concrete members, and tension is applied to the tendons during construction to facilitate the integrated behavior of the members. However, the tension in a PT tendon decreases over time due to steel corrosion and concrete creep, and consequently, the stress on the anchor head that secures the PT tendon also diminishes. This study proposes an automatic detection system to identify tension reduction in a PT tendon using pulsed-eddy-current (PEC) measurement. An eddy-current sensor is installed on the surface of the steel anchor head. The sensor creates a pulsed excitation to the driving coil and measures the resulting PEC response using the pick-up coil. The basic premise is that the tension reduction of a PT tendon results in stress reduction on the anchor head surface and a change in the PEC intensity measured by the pick-up coil. Thus, PEC measurement is used to detect the reduction of the anchor head stress and consequently the reduction of the PT tendon force below a certain threshold value. The advantages of the proposed PEC-based tension-reduction-detection (PTRD) system are (1) a low-cost (< $ 30), low-power (< 2 Watts) sensor, (2) a short inspection time (< 10 seconds), (3) high reliability and (4) the potential for embedded sensing. A 3.3 m long full-scale monostrand PT tendon was used to evaluate the performance of the proposed PTRD system. The PT tendon was tensioned to 180 kN using a custom universal tensile machine, and the tension was decreased to 0 kN at 20 kN intervals. At each tension, the PEC responses were measured, and tension reduction was successfully detected.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.405-416
• /
• 2015

This paper developed a method analyze drivers' response characteristics using spectral analysis with car following data. Cross-correlation function and cross spectrum are produced by Fourier transform from speed fluctuations of leading vehicle and following vehicle during the designated time ${\tau}$. Based on the analysis data, a process to calculate the reaction time and stimulus-adaption index of following vehicle was developed and 170 cases of field data was applied. It was reported average of 0.654 and 2.091 seconds of stimulus-adaption index and reaction time respectively. In conclusion, the developed indexes might contribute to enhance vehicle control of autonomous vehicle more efficient and safer.