• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1305-1308
• /
• 2008

In this study, we redesigned the reliable integrated on-panel display gate driver that was equipped with dual pull-down as well as controlled discharge-path structure to reduce the high voltage stress effect and realized with TSMC 0.35 um CMOS-based technology before. An improved discharge path and a low noise design are proposed for our new a-Si TFT process implementation. Our novel reliable gate driver design can make each cell of shift register to be insensitive to the coupling noise of that stage.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.205-213
• /
• 2006

A cost-effective magnetic-coupled AC-PDP sustain driver with low switching loss is proposed. The transformer reduces current stress in the energy recovery switches which affects circuit cost and reliability. The turns-ratio can be used to adjust the sustain pulse slopes which affect gas discharge uniformity. Dividing the recovery paths prevents abrupt changes in the output capacitance and thereby switching losses of the recovery switches is reduced. In addition, the proposed circuit has a more simple structure because it does not use the recovery path diodes which also afford a large recovery current. By reducing the current stress and device count in the energy recovery circuit, the proposed driver may have decreased circuit cost and improved circuit reliability.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.446-448
• /
• 2008

A new plasma display panel sustaining driver using single side sustaining technique with the dual resonant method is proposed. Since this circuit enables to reduce switches in energy recovery circuit with keeping voltage stress like that of prior circuit, it can be low cost circuit comparing with a conventional driver. To integrate sustain function into one side with single power source in the driver, a charge pump method is adopted to make negative sustaining voltage and achieve dual resonant energy recovery on sustaining modes.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.554-559
• /
• 2005

It seems to be dangerous to use a cellular phone while driving since it increases driver's mental stress and makes driver's reaction time slow. This study is to investigate driver's psycho-physiological responses on mobile telephoning while driving. Among the three experimental factors (mobile-phone types, message IODs over mobile-phone, road types), only the message IODs over mobile-phone changed R-R intervals of electrocardiograph significantly. This result suggests that the regulations on the mobile telephoning while driving be changed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.125-130
• /
• 2006

In this study, tests of brain waves were carried out to investigate the driver's physiological characteristics by the change of the headlight. The participants were 20 men in their 20s and twenty-three different conditions in combinations of waveform of light, voltage, and alteration time were used. The measurement of the brain waves was performed by internationally standardized 10-20 method using LXE3232-RF. The results were analyzed by Power Spectrum Analysis using alpha-, and beta-wave and by the analysis of different brain domains using Brain wave Map. The results were as follows. 1. From the results of the Brain wave Map analysis, it was suggested that A waveform increases mental stress and B waveform affects mental and visual stress. The longer the stimulation time, the more stress level was detected. 2 The voltage alteration time of B waveform should be kept less than 1500msec, and the voltage should not fall below 11.5V.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.699-705
• /
• 2012

The role of a seat belt in a vehicle is to protect the driver from injury when a crash occurs. However when a large crash occurs, the driver slips forward and receives a strong impact. To prevent this situation, improvement of seat belts is essential. In this study, the new concept of a dynamic locking tongue (DLT) for seat belts is developed. The DLT device is used to reduce the impact to the driver's chest by tightening the webbing, so the driver is protected from severe injury in a large crash. First, a finite element model of the DLT device is created using SAMCEF and structural analysis is conducted with boundary conditions similar to those found in experiments. Then, the stress in the DLT device can be calculated. Second, the shape of the DLT device is optimized using the response surface analysis method in order to minimize the stress and weight. The validity of the optimization of the DLT device is verified using structural analysis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.593-600
• /
• 2010

In this paper, High brightness LED (light-emitting diodes) driver IC (integrated circuit) using new current sensing circuit is proposed. This LED driver IC can provide a constant current with high current precision over a wide input voltage range. The proposed current-sensing circuit is composed of a cascode current sensor and a current comparator with only one reference voltage. This IC minimizes the voltage stress of the MOSFET (metal oxide semiconductor field effect transistor) from the maximum input voltage and has low power consumption and chip area by using simple-structured comparator and minimum bias current. To confirm the functioning and characteristics of our proposed LED driver IC, we designed a buck converter. The LED current ripple of the designed IC is in ${\pm}5%$ and a tolerance of the average LED current is lower than 2.43%. This shows much improved feature than the previous method. Also, protections for input voltage and operating temperature are designed to improve the reliability of the designed IC. Designed LED driver IC uses 1.0 ${\mu}m$ X-Fab. BiCMOS process parameters and electrical characteristics and functioning are verified by spectre (Cadence) simulation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.2
• /
• pp.100-105
• /
• 2018

In this paper, we determined the driver's stress and fatigue level through physiological signals of a driver in the connected car environment, accordingly designing and implementing the architecture of the connected cars' platforms needed to provide services to make the driving environments comfortable and reduce the driver's fatigue level. It includes a gateway between AVN and ECU for the vehicle control, a framework for native applications and web applications based on AVN, and a sensing device and an emotion estimation engine for application services. This paper will provide the element technologies for the connected car-based convergence services and their implementation methods, and reference models for the service design.

• Korean Journal of Culture and Social Issue
• /
• v.15 no.4
• /
• pp.547-563
• /
• 2009

This study was conducted to examine the stress effects of time pressure and induced driver-anger on driving performance. The participants in the four different stress conditions(i.e., control condition, time pressure, induced anger, and mixed condition where induced-anger and time pressure were combined) were asked to drive the driving simulator, and their driving performances(i. e., lane crossing, signal violation, speeding, and deviation form designated path) were measured as the dependent variable. The results can be summarized as followings. (1) Induced-anger alone and the mixed driver stresses tended to yield deteriorated driving performances as well as awareness for designated path, (2) Time pressure alone appeared to have only limited effect both on the driving and path awareness. And (3) the effects of induced-anger alone and the mixed condition on driving performance and path awareness did not show ant significant difference. The results of the present study indicated that drivers' basic vehicle control and keeping awareness to destination could be affected differently by the types of driver stress.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.29-38
• /
• 2023

Although the biosignal is the best way to represent the human condition, it is difficult to acquire the biosignal of a driver driving for detecting driver's condition. As one of the methods to overcome this limitation, this paper proposes a driving stress monitoring system based on information provided by OBD-II(on-board diagnostics version II). The driving information and EDA(Electrodermal activity) data are obtained through the OBD-II scanner and E4 wristband, respectively. EDA data is used as ground truth to distinguish whether driver is stressed or not. MLP(multi-layer perceptron) neural network is used as a model to detect driving stress and is trained using driving data for about a month. To evaluate the proposed system, we used about 1 hour of driving data and the accuracy is 92%.