• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.381-382
• /
• 2006

The mechanical behaviors of multi-layered foam core sandwich composite were investigated through a 3-point bending test. The sandwich specimens were obtained from sandwich panel consisting of aluminum faces and urethane foam core. Three types of sandwich specimens such as a single structure, a double structure and a triple structure were considered. The span of sandwich specimens were varied from 170mm to 350mm. According to the results, the flexural and shear properties of multi-layered sandwich composite were found to be higher than those of single-layered sandwich composite.

• Journal of Biomedical Engineering Research
• /
• v.2 no.1
• /
• pp.21-30
• /
• 1981

In this study, measuring eye movements with E.O.G. to targets beyond 20$^{\circ}$ from fixation point, results are as follows. (1) When the eyes turn toward targets of more than 20$^{\circ}$ eccentricity, the first saccadic eye movement falls short of the target. The presence of image of the target off the fovea(visual error signal) subsequent to such an undershoot elicits, after short interval, corrective saccadic eye movements(usually one) which place the image of the target on the fovea. (2) There are different programming modes at retina for eye movement to targets within and beyond 20$^{\circ}$ from the fixation point. (3) Saccadic system, preparing the direction and amplitude of eye movement completes the corrective saccadic eye movements. (4) Distribution of latency and intersaccadic interval(I.S.I.)are frequently multi modal, with a seperation between modes of 25[msec]. (5) There are two types of saccadic eye movements for the double-step targets. This fact suggests that the visual information is sampled stochastically. (6) The new model of saccadic system including the dissociation of visual functions dependent on retinal eccentricity is required.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.13-34
• /
• 1975

Analytical solutions for the transient temperature distribution and quasi-static thermal stresses which arise in a thin circular disk of finite radius subjected to an instantaneous point source acting in its interior have been obtained. And the solutions have been extended to the case of a moving heat source with the aid of the Duhamel's superposition integral. The solutions given are in the form of double infinite serieses, and their numerical results have been compared with the experimental temperature histories. It can be found out that the theoretical histories of thermal stresses show a good agreement with the experimental results and the theoretical histories of thermal stresses show a good qualitative agreement with a physical phenomena. The solutions can be applied to the problems such as a flame hardening of the cylindrical machine elements and a circular patch welding or a circular cutting of the structural member.

• Journal of Communications and Networks
• /
• v.15 no.6
• /
• pp.576-580
• /
• 2013

In this paper, we investigate the capacity of a multipoint-to-point cognitive radio network. In existing works, the asymptotic capacity is only obtained in the high peak power region at secondary transmitter (ST) or obtained without considering the interference from primary transmitter (PT) for easy analysis. Here, we analyze the asymptotic capacity by considering an arbitrary peak power at the ST and the interference from the PT based on extreme value theory. Simulation results show that our approximated capacity is well-matched to the exact capacity. Furthermore, the scaling law of our capacity is found to be double logarithm of the number of secondary users.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.146-147
• /
• 2007

A universal four-point contact measurement method, has an advantage of non-existence of contact resistance, is demonstrated by the experiments with carbon nanotubes and ZnO nanowire. Ti/Au and Pt are tried to compare the influence of contact resistance between two different metals. These metals are selected to make Ohmic contact and Schottky contact originated from their different work functions. For precise experiments, Ti/Au and Pt are separately evaporated to form double 'four-point contact electrodes' on CNTs or ZnO, and the voltage-current characteristics are measured. This method can be applied to universal resistivity measurement for nanotubes and nanowires.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1593-1600
• /
• 2009

There are two major algorithms to find a square root of floating point number, one is the Newton_Raphson algorithm and GoldSchmidt algorithm which calculate it approximately by iterating multiplications and the other is SRT algorithm which calculates it exactly by iterating subtractions. This paper proposes an exact floating point square root algorithm using only multiplication. At first an approximate inverse square root is calculated by Newton_Raphson algorithm, and then an exact square root algorithm by reducing an error in it and a compensation algorithm of it are proposed. The proposed algorithm is verified to calculate all of numbers in a single precision floating point number and 1 billion random numbers in a double precision floating point number. The proposed algorithm requires only the multipliers without another hardware, so it can be widely used in an embedded system and mobile production which requires an efact square root of floating point number.

• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.30-41
• /
• 2011

The influences of the agitation as well as the addition of medium during culture on the production of embryos were invested in isolated microspore culture of hot pepper (Capsicum annuum L.). When the culture medium was added during initial liquid culture step of liquid-double layer culture, the embryo yield and quality greatly increased. The most effective time point for medium addition was 5 days after the culture commenced. On the other hand, the effect of medium addition at later double layer culture step in liquid-double layer culture on the embryo production was less compared to that of medium addition during the initial liquid culture step. Agitating the culture for 1 week during later double layer culture step in liquid-double layer culture effectively increased the production of normal cotyledonary embryos. In the case of liquid culture, agitating the culture for 1 week from 7 days after the culture commenced was also effective for embryo development. However, when the total agitation time was longer (2 to 3 weeks) during liquid-double layer culture or liquid culture, the embryos developed abnormally in both cases. The normal cotyledonary embryos obtained in this study successfully developed to plants when transferred to regeneration media. These regenerated plants were either diploid or haploid, and there was a difference in the number of chloroplasts between guard cells of diploid and haploid. These results can be used as an important data for developing an efficient microspore culture system with high quality embryo production in hot pepper.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.425-431
• /
• 2015

LNG (liquefied natural gas) is considered the best alternative eco-fuel, and many studies on the LNG fuel system have been performed to use LNG as the fuel for ships. For the LNG fuel supply system, natural gas transfers from the vaporizer to the engine in the gaseous state with a temperature of $50^{\circ}C$ and a pressure of 35MPa. Therefore, a structural safety evaluation of the double-walled pipelines considering thermal load is essential. In this article, an uniaxial tensile test for super duplex stainless steel, material for double-walled pipe, according to the annealing time was carried out to analyze the thermal effect. In addition, thermo-structural analysis of the high temperature-high pressure double-walled pipe with fixed supports that are now used widely was carried out to evaluate the structural safety. To minimize stress concentration of the connection point between the support and inner pipe, the shapes of the new type support that can slip through inner pipe were proposed, and the supports which has best structural performance was selected using the results from the thermo-structural analyses of new supports and an analysis of the whole double-walled pipeline was performed to ensure structural safety. These results can be used as a database for the design of double-walled pipelines and sliding support.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.33-41
• /
• 2002

In dental prosthetics, the application of metal-ceramic restorations has steadily increased since their introduction. This is due to excellent esthetics in combination with high mechanical stability. In order to optimum bond strength between metal and ceramics, controlled oxidation of metal substructure is essential factor. Beryllium containing and beryllium free Ni-Cr alloys for metal-ceramic restorations were evaluated for the metal-ceramic bond strength by changing heat treatment for oxide formation. A mechanical three-point bending test was employed to evaluate the interfacial bond strength of metal-ceramic. In each metal, plate type specimens were used for mechanical three-point bending test. With Ni-Cr alloys for metal ceramics, mechanical three-point bending test showed that double degassing was more available preheat treatment method than another. It was found that beryllium containing Ni-Cr alloys are more effective than beryllium-free for metal-ceramic bond strength.

• Journal of Digital Contents Society
• /
• v.8 no.1
• /
• pp.85-91
• /
• 2007

This paper proposes a new hybrid anti-aliasing method for reducing aliasing appearing on an implicit surface using the point sampling. The hybrid anti-aliasing method is a method that finds differences in the values of pixel shown in Z-buffers for an implicit surface and thereby uses each of three types of Z-buffer. After determining the level of differences, it expresses a 3 dimensional object by using a multi Z-buffer if the level is severe, a double Z-buffer for a middle level, and only the original Z-buffer for a negligible difference. In comparison with the existing method in which multi Z-buffers have been entirely used for enhancing the anti-aliasing effect, the hybrid anti-aliasing method is an efficient method demonstrating an effect similar to the one using a multi Z-buffer while reducing the number of Z-buffers to be used.