• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.8
• /
• pp.3295-3311
• /
• 2020

With the wide application of hyperspectral images, it becomes more and more important to compress hyperspectral images. Conventional recursive least squares (CRLS) algorithm has great potentiality in lossless compression for hyperspectral images. The prediction accuracy of CRLS is closely related to the correlations between the reference bands and the current band, and the similarity between pixels in prediction context. According to this characteristic, we present an improved CRLS with adaptive band selection and adaptive predictor selection (CRLS-ABS-APS). Firstly, a spectral vector correlation coefficient-based k-means clustering algorithm is employed to generate clustering map. Afterwards, an adaptive band selection strategy based on inter-spectral correlation coefficient is adopted to select the reference bands for each band. Then, an adaptive predictor selection strategy based on clustering map is adopted to select the optimal CRLS predictor for each pixel. In addition, a double snake scan mode is used to further improve the similarity of prediction context, and a recursive average estimation method is used to accelerate the local average calculation. Finally, the prediction residuals are entropy encoded by arithmetic encoder. Experiments on the Airborne Visible Infrared Imaging Spectrometer (AVIRIS) 2006 data set show that the CRLS-ABS-APS achieves average bit rates of 3.28 bpp, 5.55 bpp and 2.39 bpp on the three subsets, respectively. The results indicate that the CRLS-ABS-APS effectively improves the compression effect with lower computation complexity, and outperforms to the current state-of-the-art methods.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.6
• /
• pp.1050-1057
• /
• 2016

SNS (Social network service) characteristics are perceived to simplify use. We carried out empirical studies on these parameters to observe the impact on the image of catering SNS online by word-of-mouth. The subjects of the study were as follows: 32.3% (392 persons) 19 years old, 67.7% (821 persons) over 19 years, 51.0% (619 persons) in their 20s, 22.1% (268 persons) in their 30s, 17.6% in their 50s, and 9.3% (112 persons) over 50 years. After verifying the hypothesis proposed that SNS characteristics perceived the ease of use, the significant factor identified in usability were connectivity Speed (${\beta}=0.213$), playfulness (${\beta}=0.246$), information (${\beta}=0.115$), and reciprocity (${\beta}=0.357$). Dual reciprocity had the most impact. It was observed that a longer impact of these significant factors improved the feel and fun of use. If SNS companies cater to, quick and easy, diverse, reliable and latest information, they can increase the ease of use, and availability, depending on the goals. Also, significant factors in the SNS features and online word of mouth was playfulness (${\beta}=0.312$), information (${\beta}=0.207$), reciprocity (${\beta}=0.066$) and perceived ease of use, and usefulness (${\beta}=0.293$), double playfulness had the maximum impact. These features provided more fun, reliable information, and could quickly deliver the latest information. The more the perceived usefulness, and ease of use, higher was the online word-of-mouth effect. SNS usage characteristics of connectivity Speed did not show any statistical significance in online word-of-mouth. Thus, catering businesses need to find ways to increase the ease of use, make the usefulness multifaceted, constantly checking the catering information on the SNS and ensuring to get the latest information is from diverse and reliable sources. This would increase the fun for the customer making the SNS to actively be utilized as a marketing tool.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.2
• /
• pp.11-23
• /
• 2011

In this paper, an accurate and fully automatic video object segmentation method is proposed for video conferencing systems in which the real-time performance is required. The proposed method consists of two steps: 1) accurate object extraction on the initial frame, 2) real-time object extraction from the next frame using the result of the first step. Object extraction on the initial frame starts with generating a cumulative edge map obtained from frame differences in the beginning. This is because we can estimate the initial shape of the foreground object from the cumulative motion. This estimated shape is used to assign the seeds for both object and background, which are needed for Graph-Cut segmentation. Once the foreground object is extracted by Graph-Cut segmentation, real-time object extraction is conducted using the extracted object and the double edge map obtained from the difference between two successive frames. Experimental results show that the proposed method is suitable for real-time processing even in VGA resolution videos contrary to previous methods, being a useful tool for immersive video conferencing systems.

• Science of Emotion and Sensibility
• /
• v.7 no.1
• /
• pp.23-28
• /
• 2004

In this paper, we investigated the affective components of facial beauty. In study 1, we did factor analysis of affective evaluations of the faces, and about 65% of the variances are explained by only two factors. Two factors were named 'sharp' and 'soft', respectively. In study 2, the correlation between facial beauty and affective evaluations was analyzed, and the correlation between facial beauty and sharp factor was significant. In study 3, we made the new images by morphing and warping the faces: 'average', 'high-ranked', and 'exaggerated'. The participants evaluated the 'high-ranked' face more beautiful than the 'average' face, and the 'exaggerated' face more beautiful than the 'high-ranked' face. The rating of affective words on the faces showed that the 'average' face was related to 'soft' impression, the 'high-ranked' image to 'sharp' impression, and the 'exaggerated' face might have double impression. These results might support the directional hypothesis for the facial beauty.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.117-130
• /
• 1997

The purpose of this study were to identify the design elements and the changing flow of advertisement from 1970's to 1990's by using content analysis of men's magazines. Finding were as followed; First through the analysis of men's wear advertisement in magazine it was found that the closer to 1990's the more various men's wear styles and backgrounds were advertized. These were more image oriented than product oriented. Since 1980 the advertisement about the licenced and the imported brands have been increased and the serial advertisement has shown more fre-quently than the 1-page advertisement since 1990's ; Second two piece suit was dominated in men's wear during 1970's and 1980's From 1990's this style was decresed in stead combi suit was increased. In 1970's the X silhouette was infashion and the y and the X silhouette was in fashion and the y and X sillhouette were increased during 1980's . The H silhouette was dominated in 1990's The brighter and the more various colors appeared in 1990's than in 1970's. The brighter and the more various colors appeared in 1990's than in 1970's The solid pattern was the main flow in men's wear however the stripes and the the check patterns were added in 1990's Third single breasted jacket style with two buttons and tailored collar was in fashion during 1970's . The length of the v-zone was shorter than half at this time however it was lengthened in 1980's . Also the the length of the jacket was lengthened. In 1990's the double breasted jacket style and two buttons were increased. The length of the v-zone and jacket were also lengthened.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.51-57
• /
• 2000

With the emergence of laser mapping systems, higher resolution DTM of urban area can be acquired and can be used to generate precise orthoimage. But, when the conventional orthoimage generation methods are applied to the area containing features with height difference such as cliffs, bridges, banks. elevated highways and buildings, they cause problems such as occlusion and double mapping. Therefore, this study proposes a new algorithm by modifying and refining conventional orthoimage generation methods. With this algorithm, areas which have occlusion are detected from the base image using camera orientation parameters and DTM. Also, detected areas are restored using alternative images which does not have occlusion in that area. This study can be distinguished from the other studies in the aspects that the proposed algorithm in this paper doesn't need information on building and that uses DTM data and orientation parameters.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.272-277
• /
• 2005

A CMOS active pixel sensor has been designed and fabricated using standard 2-poly and 4-metal $0.35{\mu}m$ CMOS processing technology. The CMOS active pixel sensor has been made up of a unit pixel having a highly sensitive PMOSFET photo-detector and electronic shutters that can control the light exposure time to the PMOSFET photo-detector, correlated-double sampling (CDS) circuits, and an 8-bit two-step flash analog to digital converter (ADC) for digital output. This sensor can obtain a stable photo signal in a wide range of light intensity. It can be realized with a special function of an electronic shutter which controls the light exposure-time in the pixel. Moreover, this sensor had obtained the digital output using an embedded ADC for the system integration. The designed and fabricated image sensor has been implemented as a $128{\times}128$ pixel array. The area of the unit pixel is $7.60{\mu}m{\times}7.85{\mu}m$ and its fill factor is about 35 %.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1168-1175
• /
• 2005

Clothing pressure has close relation with clothing comfort and depends on the pattern and properties of textile fabrics. Choosing a suitable clothing pressure is an essential factor for designing functional clothing such as the foundation for reshaping of a body contour or medical items for bum patient, and etc. However, it is hard to measure pressure values at the curved surface of a human body correctly. Recently, an air pack type pressure sensor, which has relatively excellent performance has been used to measure clothing pressure, however, it is still inconvenient to apply because it is a contact- type sensor. Therefore, in this paper, we suggest an indirect method that can measure clothing pressure without touching the subject by improving the equation of Kirk and Ibrahim (1966). However, confusions have been occurred when someone use the equation since the definition of parameters are somewhat vague. Furthermore, the estimated clothing pressure obtained by the previous method are quite different from the real values because this method does not consider the 3D effect of a human body and property changes of a transformed fabric. In this paper, the direction of principal stress and the radius of curvature in the principal direction were searched in the 3D image of the deformed girdle to get more accurate clothing pressure. The estimated clothing pressure was verified by comparing the result of the air pack type pressure sensor. It was found that the accuracy of the pressure estimation was improved by considering the 3D curvature of human body and the directional characteristics of textile fabrics.

• Geotechnical Engineering
• /
• v.8 no.4
• /
• pp.5-16
• /
• 1992

The main purpose of this the sutdy is to develop the reinforced earth structure design method considering induced stresses and deflections resulting from placement and compaction of soil. In this paper, the new reinforcement Geolog developed by the author is also introduced which is being used as one of the effective earth reinforcing structure against compaction induced stresses. This study adopted the Seed's bilinear model in the estimation of the com paction induced stresses and compute the peak lateral stresses during compaction by doubled Boussinessq's elastic solution of mirror image theory, thereafter, calculate the residual compaction induced lateral stresses from the above peak lateral stress by the residual fraction. It is considered to be reasonable that the compaction induced stresses be added to the lateral earth pressures estimated from conventional gravity analysis considering the actual stresses during service life of the structures. "GEOLOG", a composite of steel bar and attached concrete stopper is found to be effective against tension and pull - out failure. In this paper, the design method considering the compaction induced stresses and the effect of Geolog reinforcement is suggested for the remforced earth structures where backkfill settlement on displacements are not allowed as in the cases of the bridge abutments or double faced reinforcement earth structures.tructures.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.115.1-115.1
• /
• 2011

We analyzed the line profiles of the planetary nebula (PN) NGC 7009 secured with the Keck I HIES and BOES's spectral data. The 5 positions were taken over the nebular image, 4 points on the bright rim plus 1 point at the central position. The covered spectral wavelength range was $3250{\AA}-8725{\AA}$ in these observations. We decomposed the lines of HI, HeI, HeII, CII, NIII, [ClIII], [NII], [OII], [OIII], [SII], [SIII], [ClIII], and [ArIII] using the IRAF and StarLink/Dipso. After correcting the Earth's movement and the PN's radial velocities, -48.6 & -48.9 km/s, respectively, for the Keck & BOES, we produced the line profiles in a velocity scale. The zero velocity at each line profile clearly indicates which part of the components is approaching or receding, giving a general information of the kinematical structure. Almost all of the low-to-medium excitation lines, such as [NII], [SII], [O III], and [ArIII], secured at the central position and four positions along the major & minor axes, showed 3 components, double peak + a wide wing component, suggesting the fast outflow structures are present. The overall geometry is a prolate shell which also has a fainter outer shell in the halo zone, but there appears to be some peculiar sub-structures inside the main shell. The high excitation He I, HeII, NIII lines which might be formed close to the inner boundary of the shell show unusual features, completely different from the other lines. The HeII and these high excitation lines may be indicative of a relative recent fast outflow from the central star and the permitted lines such as NIII might be affected by the innermost structure. We discuss a possible presence of a jet-like fast outflow structure in an out-flow axis different from the main axis of the spheroid shell.