• Journal of Mushroom
• /
• v.22 no.2
• /
• pp.48-52
• /
• 2024

This study investigated the microscopic characteristics and genetic relationships of Ganoderma applanatum fruiting bodies. Basidiospores were brown, ellipsoid, and had one or two large vacuoles and a double wall. The surface of basidiospores was smooth or wrinkled and most had numerous small and shallow holes. The length and width of basidiospores of Ganoderma applanatum isolates GBGA-01, GBGA-02, ASI 50167, ASI 52821, ASI 52822, ASI 52823, and ASI 53399 were on average 7.6×4.8 ㎛, 7.9×4.6 ㎛, 7.7×4.9 ㎛, 8.2×5.3 ㎛, 7.7×5.0 ㎛, 8.0×4.9 ㎛, and 7.9×4.9 mm, respectively. In contrast, the basidiospores of Ganoderma lucidum isolate ASI 7125 were 7.7×5.2 ㎛. Using the universal ITS1/ITS4 primer set, the ITS region of the isolates were amplified and sequenced. The ITS sequences were very closely related to G. applantum isolate GBGA-01, GBGA-02, ASI 50167, ASI 52821, ASI 52822, ASI 52823 and ASI 53399, but were not the same species. Whereas, G. lucidum isolate ASI 7125 belongs to different group.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.571-575
• /
• 2014

'Dream Song' is a cultivar of Gypsophila paniculata developed by the Jeollabuk-do Agricultural Research & Extension Services in 2010 for cut-flower production. This hybrid was bred from 121 seedlings collected from an open-pollinated population of 'Gyp06-11'. It has novel morphological characteristics of upright plant type, lanceolate leaves, double florets with a few bright white-colored petals of obovate shape, truncate petal tips, and cup-shaped calyces. Furthermore 'Dream Song' has desirable cultivation characteristics including narrow branching angle, and moderate resistance to powdery mildew, thrips and leaf miners. Moreover it produces more primary branches, and longer internodes and flower stalks than reference cultivar 'Bristol Fairy' during summer cultivation in a subalpine area (500 m over the sea level). Flowering in 'Dream Song' is delayed by about 17 days as compared to 'Bristol Fairy'. 'Dream Song' produces normal flowers with 2 pistils and an average of 10.4 stamens, with fewer malformed flowers than 'Bristol Fairy'.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.128-132
• /
• 2013

A new pink gerbera (Gerbera hybrida Hort.) cultivar 'Party Time' was developed from a cross between 'Hope' and 'Sunnyeo', followed by seedling and line selections at the Flower Research Institute of Gyeongnam Agricultural Research and Extension Services (GARES) in 2007. Detailed characteristics of the new cultivar were evaluated from 2005 to 2007. 'Party Time' has semi-double type large flowers in a good harmony with pink (RHS, 65-C) ray floret and brown center. It has a good, stable flower shape and strong peduncles, and its vase life was 12.7 days. The average flower yield of 'Party Time' was about 47.3 stems per plant a year in greenhouse yield trails carried out 2005 to 2007. 'Party Time' (Grant No. 2691) was registered to the Korea Seed and Variety Service (KSVS) for commercialization in 2009.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.595-598
• /
• 2009

A new yellow gerbera (Gerbera hybrida Hort.) cultivar "Golden Time" was developed from a cross between '99-ga-2' and '99-na-7-6', followed by seedling and line selections at the Flower Research Institute, Gyeongnam Agricultural Research and Extension Services (ARES) in 2007. Detailed characteristics of the new cultivar were evaluated from 2004 to 2007. "Golden Time" has semi-double type large flowers in a good harmony with yellow (RHS, 17-B) ray floret and brown center. It has good, stable flower shape and strong peduncles, and its vase life was 12.3 days. The average flower yield of "Golden Time" was about 49.5 stems per plant/year in greenhouse trails during 2004 and 2007. This cultivar was registered to the Korea Seed and Variety Service (KSVS) for commercialization in 2009. Year-round production of this cultivar is possible in the greenhouse condition throughout the Korean climate.

• The Journal of the Korean bone and joint tumor society
• /
• v.3 no.1
• /
• pp.18-25
• /
• 1997

Prosthetic replacement is one of the most common methods of reconstruction after resection of malignant tumor around the knee. Gait analysis provides a relative objective data about the gait function of patients with prosthesis. The purpose of this study was to compare the gait pattern of the patients who underwent limb salvage surgery with prosthesis for distal femur and that of patients with prosthesis for proximal tibia. This study included ten patients (4 males, 6 females, mean age 22.7 years, range 14-36) who underwent a wide resection and Kotz hinged modular reconstruction prosthesis replacement and six normal adult(Control). The site of bone tumor was the distal femur (Group 1) in six patients and proximal tibia (Group 2) in 4 patients. The follow-up period ranged from 15 to 82 months (mean : 33 months). The evaluation consisted of clinical assessment, radiographic assessment, gait analysis using VICON 370 Motion Analysis System. The gait analysis included the linear parameters such as, walking velocity, cadence, step length, stride length, stance time, swing time, single support and double support time and the three-dimensional kinematics (joint rotation angle, velocity of joint rotation) of ankle, knee, hip and pelvis in sagittal, coronal and transverse plane. For the kinetic evaluation, the moment of force (unit: Nm/kg) and power (unit: Watt/kg) of ankle, knee and hip joint in sagittal, coronal and transverse plane. In the linear parameters, cadence, velocity, step time and single support were decreased in both group 1 and group 2 compared with control. Double support decreased in group 2 compared with control significantly(p<.05). In contrast to our hypothesis, there was no significant difference between group 1 and group 2. In Kinematics, we observed significant difference (p<.05) of decreased knee flexion in loading response (G2

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.491-499
• /
• 2015

Silicon Carbide(SiC) has large advantage in high temperature and high voltage applications because of its high thermal conductivity and large band gap energy. When using SiC to design power semiconductor devices, edge termination techniques have to be adjusted for its maximum breakdown voltage characteristics. Many edge termination techniques have been proposed, and the most appropriate technique for SiC device is Junction Termination Extension(JTE). In this paper, the change of breakdown voltage efficiency ratio according to the change of doping concentration and passivation oxide charge of each JTE techniques is demonstrated. As a result, the maximum breakdown voltage ratio of Single Zone JTE(SZ-JTE), Double Zone JTE(DZ-JTE), Multiple Floating Zone JTE(MFZ-JTE), and Space Modulated JTE(SM-JTE) is 98.24%, 99.02%, 98.98%, 99.22% each. MFZ-JTE has the smallest and SZ-JTE has the largest sensitivity of breakdown voltage ratios according to the change of JTE doping concentration. Additionally the degradation of breakdown voltage due to the passivation oxide charge is analyzed, and the sensitivity is largest in SZ-JTE and smallest in MFZ-JTE, too. In this paper, DZ-JTE and SM-JTE is the best efficiency JTE techniques than MFZ-JTE which needs large doping concentration in short JTE width.

• Journal of the Korean Society of Visualization
• /
• v.8 no.2
• /
• pp.23-30
• /
• 2010

Regarding the aircrafts with a rotor blade system, the miniaturization of them is limited due to the rotor blade length and the tail rotor system. To miniaturize an aircraft, an equipment is required that increases thrust and also shortens the length of the rotor blade. The present study will conduct the flow analysis for miniaturizing the aircraft by applying a duct to the coaxial rotor blade system without tail rotor. First, the verification on the calculated results was conducted through the computational flow analysis on the coaxial rotor blade system without a duct. Then, the flow analysis for the coaxial rotor blade systems was performed including Ka-60 duct, Single duct, Twin duct, and Double duct, respectively. From the numerical results, the thrust coefficient appeared higher with the duct than without a duct for the coaxial rotor blade system. Especially, in the case of Double duct, the thrust was improved due to the increase of incoming flow and the extension of the wake area. These results will be used as the basic concepts for miniaturizing the aircraft with the rotor blade system. The flow analysis on the coaxial rotor blade system including the fuselage remains as a future work.

• Journal of Veterinary Clinics
• /
• v.34 no.4
• /
• pp.241-244
• /
• 2017

The purpose of this study was to evaluate the concurrent validity of the double meter inclinometer (DMI) for passive joint range of motion (ROM) in beagle dogs and to compare these results to a universal plastic goniometer (UPG). Fifteen beagle dogs were recruited for this study. Joint ROM was evaluated twice with each device to calculate the intraobserver reliability. The intraclass correlation coefficient (ICC) values of the UPG were good to excellent (> 0.75) for all joint ROM tests. Similar results were obtained with the DMI. The ICC values of the DMI were good to excellent (> 0.75) except in extension of the tarsal joint (ICC = 0.69). The majority of the ICC results between each device were poor (< 0.50) with the exception of six joints. Our findings suggest that the inclinometer can be used for passive joint ROM in veterinary medicine. However, caution should be taken when comparing measured values of passive joint ROM obtained utilizing both the DMI and UPG.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.633-640
• /
• 2008

With a double mismatch primer set designed for amplifying the modified DNA sequence fragments, bovine melanocortin-1 receptor(MC1R) gene encoded in Extension locus which plays a critical role in coat color development was analyzed using polymerase chain reaction mediated restriction fragment length polymorphism(PCR-RFLP). Amplified PCR fragments were successfully discriminated with combining the MspI- and AluI-RFLP into three major alleles(ED, E+, and e), directly related to bovine coat color phenotypes. The genotyping results showed that Jeju black cattle contained three MC1R alleles, but yellowish-red colored Hanwoo and bridle colored Korean Brindle cattle did not contained the dominant black allele ED. However, two dominant black-colored cattle breeds, Holstein and Angus, contained the ED allele over 96% in frequency. Hanwoo×Holstein F1 and Hanwoo×Angus F1 crossbred calves showed ED/e MC1R genotypes, and uniformly black coat color. the results suggested that this MC1R genotyping method be useful in allele discrimination for bovine MC1R gene which used for breed classification and characterization, as one of the important genetic markers, using combination of MspI- and AluI-RFLP for modified PCR product amplified with a newly designed double mismatch primer set.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.322-330
• /
• 2014

New effective techniques to repair "small" design errors in integrated circuits are presented. As semiconductor chip complexity increases and the design period becomes tight, errors frequently remain in a fabricated chip making revisions required. Full mask revision significantly increases the cost and time-to-market. However, since many "small" errors can be repaired by modifying several connections among the circuit blocks and spare cells, errors can frequently be repaired by revising metal layers. Metal only revision takes significantly less time and involves less cost when compared to full mask revision, since mask revision costs multi-million dollars while metal revision costs tens of thousand dollars. In our research, new techniques are developed to further reduce the number of metal layers to be revised. Specifically, we partition the circuit blocks with higher error probabilities and extend the terminals of the signals crossing the partition boundaries to the preselected metal repair layers. Our partitioning and pin extension to repair layers can significantly improve the repairability by revising only the metal repair layers. Since pin extension may increase delay slightly, this method can be used for non-timing-critical parts of circuits. Experimental results by using academia and industrial circuits show that the revision of the two metal layers can repair many "small" errors at low-cost and with short revision time. On the average, when 11.64% of the spare cell area and 24.72% of the extended pins are added to the original circuits, 83.74% of the single errors (and 72.22% of the double errors) can be corrected by using two metal revision. We also suggest methods to use our repair techniques with normal commercial vender tools.