• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.4
• /
• pp.307-314
• /
• 2016

Energy flow analysis(EFA) is a representative method that can predict the statistical energetics of structures at high frequencies. Generally, as the frequency increases, the shear distortion and rotatory inertia effects in the out-of-plane motion of beams or plates become important. Therefore, to predict the out-of-plane energetics of coupled structures in the high frequency range, the energy flow analyses of Timoshenko beam and Mindlin plate are required. Unlike the energy flow model of Kirchhoff plate, the energy flow model of Mindlin plate is composed of three kinds of energy governing equations(out-of-plane shear wave, bending dominant flexural wave, and shear dominant flexural wave). This paper performed the energy flow finite element analysis(EFFEA) of coplanar coupled Mindlin plates. For EFFEA of coplanar coupled Mindlin plates, the energy flow finite element formulation of out-of-plane energetics in the Mindlin plate was performed. The general EFFEA program was implemented by MATLAB® language. For the verification of EFFEA of Mindlin plate, the various numerical applications were done successfully.

• Carbon letters
• /
• v.15 no.2
• /
• pp.125-128
• /
• 2014

In this study, the effect of stacking sequence on the flexural and fracture properties of carbon/basalt/epoxy hybrid composites was investigated. Two types of carbon/basalt/epoxy hybrid composites with a sandwich form were fabricated: basalt skin-carbon core (BSCC) composites and carbon skin-basalt core (CSBC) composites. Fracture tests were conducted and the fracture surfaces of the carbon/basalt/epoxy hybrid composites were then examined using scanning electron microscopy (SEM). The results showed that the flexural strength and flexural modulus of the CSBC specimen respectively were ~32% and ~245% greater than those of the BSCC specimen. However, the interlaminar fracture toughness of the CSBC specimen was ~10% smaller than that of the BSCC specimen. SEM results on the fracture surface showed that matrix cracking is a dominant fracture mechanism for the CSBC specimen while interfacial debonding between fibers and epoxy resin is a dominant fracture process for the BSCC specimen.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.439-447
• /
• 2002

The microchannel flow in miniature TCDs (thermal conductivity detectors) is investigated numerically. The solutions based on the boundary layer approximation are not very accurate in the region of the duct inlet for low Reynolds numbers. In this study, two-dimensional Navier-Stokes equations are considered to analyze the gas flow in a miniature TCD. Effects of channel size, inlet and boundary conditions on the heat transfer rate are examined. When the gas stream is not preheated, the distances for a miniature TCD to reach the conduction-dominant region for duct flow are found to be approximately two and three times the thermal entry length for duct flow with constant properties, respectively, leer constant wall temperature and constant wall heat flux boundary conditions. If the gas temperature at the channel inlet is close to the mean gas temperature in the conduction-dominant region, the entrance region is much shorter compared to other cases considered in this study.

• The Journal of Korean Physical Therapy
• /
• v.23 no.6
• /
• pp.49-53
• /
• 2011

Purpose: The purpose of this study is to investigate whether dual-hemisphere transcranial direct current stimulation (tDCS) could induce more cortical activity, compared to single-hemisphere, using functional MRI (fMRI). Methods: One right-handed healthy subject was recruited. Three phases of dual-hemisphere tDCS (i.e. anodal tDCS over the left-dominant primary sensoriomotor cortex (SM1) and cathodal tDCS over the right-non dominant SM(1) were consecutively delivered on to a subject, during fMRI scanning. The voxel count and the intensity index in the averaged cortical map were analyzed among the three tDCS phases. Results: Our result showed that cortical activation was observed on all the three phases of the dual-hemisphere tDCS. Voxel count and intensity index were as following; 912 and 4.07 in the first phase, 1102 and 3.90 in the second phase, 1031 and 3.80 in the third phase. Conclusion: This study demonstrated that application of the dual-hemisphere tDCS could induce cortical activity and maintain to recruit cortical neurons. Our findings suggested that application of dual-hemisphere tDCS could produce efficiency of the ongoing tDCS effect to facilitate cortical excitability.

• Wind and Structures
• /
• v.15 no.2
• /
• pp.87-109
• /
• 2012

A substantial part of South Africa is subject to more than one strong wind source. The effect of that on extreme winds is that higher quantiles are usually estimated with a mixed strong wind climate estimation method, compared to the traditional Gumbel approach based on a single population. The differences in the estimated quantiles between the two methods depend on the values of the Gumbel distribution parameters for the different strong wind mechanisms involved. Cluster analysis of the distribution parameters provides a characterization of the effect of the relative differences in their values, and therefore the dominance of the different strong wind mechanisms. For gusts, cold fronts tend to dominate over the coastal and high-lying areas, while other mechanisms, especially thunderstorms, are dominant over the lower-lying areas in the interior. For the hourly mean wind speeds cold fronts are dominant in the south-west, south and east of the country. On the West Coast the ridging of the Atlantic Ocean high-pressure system dominate in the south, while the presence of a deep trough or coastal low pressure system is the main strong wind mechanism in the north. In the central interior cold fronts tend to share their influence almost equally with other synoptic-scale mechanisms.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.64-70
• /
• 2008

In case that conventional PRC(Pseudo-Randomized Frequency Carrier) modulation scheme is applied to a three-phase HBML(H-Bridge Multi-Level Inverter), the dominant harmonics spectra appear at twice switching frequency. In this paper, the dominant harmonics spectra spreading effect of the conventional PRC scheme was improved by using three stage MUXs(Multiplexers) and two triangular carriers with fixed frequency which has mutual relation of the twice frequency. To confirm the validity of the improved PRC scheme, the experiment were performed on a 1.5[kw] three-phase HBML based induction motor drives. And, the harmonics spectra of the conventional and improved PRC schemes are compared and discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.10
• /
• pp.1095-1101
• /
• 2013

The purpose of this study was to verify the effect on improvement of muscle strength unbalance according to load deviation protocol during whole body vibration exercise. Seventeen female volunteers (age $22{\pm}3$ years, height $160{\pm}4.9$ cm, weight $49{\pm}.8$ kg) participated in this experiment. The subjects performed squat exercise in WBV platform. Exercise were performed five set a day including 15 time a set, three days a week, and during 4 weeks. Vibration stimulus was 25Hz as frequency and intensity was dominant leg 1mm and non-dominant leg 4mm. The results in WBV group showed that the differences of peak torque in 16% were getting decreasing significantly after 4 weeks from 16.2% to 5.2%. This result means that WBV with load deviation protocol could provide muscle strength exercise for muscle strength balance. Our study found out that WBV of load deviation protocol could provide muscle strength exercise for improving muscle imbalance.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.132-142
• /
• 1996

This paper presents a technique to model and control a manipulator which has a flexible link and moves in a vertical plane. The flexible link is modeled as an Euler-Bernoulli Beam. Elastic deformation of the flexible link is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. This paper presents a simple technique to improve the correctness of the developed model. The final model including the shortening effect due to elastic deformation correlates very well with experimental results. The free body motion simulation shows that two assumed modes for the representation of the elastic deformation is proper in terms of the model size and correctness. A control algorithm is developed using PID control technique. The proportional, integral and derivative control gains are determined based on dominant pole placement method with a rigid one-link manipulator. A position control simulation shows that the control algorithm can be used to control the position and residual oscillation of the flexible one-link manipulator effectively.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.10 no.1
• /
• pp.47-57
• /
• 2022

Purpose - Overall social entrepreneurship has a positive effect on the organization's C.S.R. and overall growth. This study aims to identify the effects of social entrepreneurship in startup companies on corporate social responsibility by identifying gaps in the literature and providing feasible solutions to the gaps. Research design, Data, and methodology - The qualitative content analysis that was conducted by this research takes the form of two research designs. The first step to conducting a conceptual content analysis is to choose the level of analysis, specifically words, phrases, word sense and the second step is the relational content analysis by choosing the concept to be examined, only that the analysis entails examining the relationships between concepts Result - According to the investigation of numerous previous literature review, the current authors found out total six solutions and the application of suggested solutions indicated that the use of innovative models, startup organizations can gain a competitive edge against dominant competitors in their industry of operations, Conclusion - Finally, the conclusion of this research indicates through the use of innovative solution models, startup organizations can gain a competitive edge against dominant competitors in their industry of operations and startup companies may range from an increase in reputation to growth in profitability and entrepreneurs' satisfaction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.183-188
• /
• 2012

To investigate the influence of the prolactin receptor 3 (PRLR3) gene and the retinol-binding protein 4 (RBP4) gene on the production traits of swine, genotyping was performed on 156 and 141 Berkshire pigs, respectively, that were carefully selected for economic traits. The frequencies of allele A in the PRLR3 locus and allele B in the RBP4 locus were 0.50 and 0.42, respectively. Neither locus was in the Hardy-Weinberg equilibrium. After a genotype was assigned to the individuals whose parents had the homozygous genotype, a statistical analysis was conducted for 291 pigs. The animals with the PRLR3 and RBP4 genotypes included 182 and 227 head, respectively. Even though the genotypic effects of PRLR3 (p<0.05) and RBP4 (p<0.01) had a significant influence on the pigs' back fat thickness, the interaction of both genes was not highly significant in terms of the back fat thickness (p = 0.1235). While the estimated epistasis effects of aaBB and aaBb decreased the back fat thickness and reduced the growth rate, the effects of AAbb and aabb increased the growth rate. Despite the insignificant difference in the PRLR genotypes in terms of the days to 90 kg and the average daily gain, the back fat thickness showed a significant difference (p<0.05), and the additive effect of allele A and the dominant effect of the hetero-genotype were -0.377 and 1.206 mm, respectively. The RBP4 genotypes had a very significant effect (p<0.01) on the back fat thickness, the days to 90 kg, and the average daily gain. The additive effects of allele B of the RBP4 locus on the back fat thickness, the days to 90 kg, and the average daily gain were 0.70 mm, -1.3 days and 6.2 g, respectively. Moreover, the dominant effects of the heterozygote for those traits were 0.63 mm, 9.9 days and -45.0 g, respectively. Allele A of the PRLR3 locus favorably influenced the back fat thickness, the days to 90 kg of the body weight, and the average daily gain and its dominant effect unfavorably influenced those traits. Allele B of RBP4 showed an incremental growth rate and back fat thickness, which could lower the lean meat percentage in the carcass. The RBP4 hetero-genotype negatively affected the pork production. These results strongly imply that the selection of allele A of PRLR3 and allele B of RBP4 would produce highly productive pigs in the Berkshire breed. Careful selection of allele B of RBP4 is required because of the increase in the back fat thickness.