• The Journal of the Acoustical Society of Korea
• /
• v.8 no.1
• /
• pp.59-66
• /
• 1989

This study aims to provide the basic data useful in assessing indoor-noise and designing sound devices in office buildings of HVAC system. The measurements of HVAC noise were carried out in office room and mechanical room. The performance of absorptive chamber and side branch was also estimated in the office buildings which have HVAC noise problems. The results of experiments show that the NR value of indoor HVAC noise is rather higher than that of ISO recommendations at the frequencies below 500Hz. In addition, the results indicated that the absorptive chamber attenuates noise over broad band frequencies and side branch reduces noise at the special resonant frequency.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.10 s.115
• /
• pp.1067-1073
• /
• 2006

In this paper, we present noise measurement results of 8 vehicles. The measurement was done by a close proximity method attaching surface microphones on the test vehicle. For the 9 road surface types constructed at Korean highway test road, the vehicles were tested from 50 to 120 km/h at the interval of 10 km/h in normal steady state and inertia cruising conditions. Using the results, we evaluate and discuss the effect of vehicle noise generation depending on the different conditions for vehicle type, speed, road surface and loading condition, especially focused on friction noise between tyre and road surface.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.428-433
• /
• 2006

In this paper, we present noise measurement results of 8 vehicles. The measurement was done by a close proximity method attaching surface microphones on the test vehicle. For the 9 road surface types constructed at Korean highway test road, the vehicles were tested from 50 to 120 km/h at the interval of 10 km/h in normal steady state and inertia cruising conditions. Using the results, we evaluate and discuss the effect of vehicle noise generation depending on the different conditions for vehicle type, speed, road surface and loading condition, especially focused on friction noise between tyre and road surface.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.77-83
• /
• 2009

The construction of concrete slab track system is increased because the system has advantages which are maintenance free and so on, the other side, the system has weak points such as increase of the cost of the early stage construction. Recently, railway environment is issued including noise. Therefore, measures which are to mitigate noise on slab tracks were introduced, however, it is found that efficiency of noise reduction is low because noise problem is still issued. In this study, to study noise characteristics on concrete tracks we measured noise by site types. Finally the results have done comparative analysis.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.955-959
• /
• 2011

In this paper, we assume that an output sensor of a ball and beam system is coupled with AC measurement noise. We propose an output feedback controller for a ball and beam system under measurement noise of feedback sensor. Measurement noise makes feedback signals distorted, and results in performance degradation or even system failure. Therefore, we need to design a robust controller to accommodate the possible measurement noise in the feedback information. Our controller is equipped with a gain-scaling factor to minimize the effect of measurement noise in output feedback information. We give an analysis of the controlled system and illustrate the improved control performance via simulation and experiment for a ball and beam system.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2417-2419
• /
• 1998

In this paper, a new active noise control technique which combines a hybrid active noise control technique and a subband active noise control technique is presented. To reduce the computational burden the active noise control system, a weighted hybrid control technique is applied. This algorithm shows higher stability and good noise attenuation property in either broad band or narrow band active noise control systems in HVAC ducts. Computer simulations were performed to show the effectiveness of the proposed algorithm.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.229-230
• /
• 2007

카메라 시스템에서 일반적인 Noise Reduction방법은 Noise간에 서로 Correlation이 없고 Independent한 White Noise이며, Zero Mean Noise라는 가정 하에 설계된 것이다. 본 논문에서는, 실제 Non-zero Mean Noise 현상을 규명하고, 이에 의해 발생한 Low Level Signal의 Boost-up 및 High Level Signal의 Drag-down을 Correction하여 화질을 개선하기 위한 방안을 제안한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.246-247
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.511-512
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.210-211
• /
• 2008