• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.29-33
• /
• 2014

Recently, Difficult-to-cut materials are used in many manufacturing industry. But the difficult-to-cut materials are difficult-to-cutting process. So difficult to cut material cutting process was used after heat treatment through preheating for easy cutting process. In this study, Inconel 625 was preheating using laser heat source in computer simulation. Laser heat source temperature applied $1290^{\circ}C$ that suitable preheating temperature for Inconel 625. And temperature effects such as temperature distribution for moving heat source studied apply to similar actual process condition. Simulation results for heat treatment effects through temperature distribution verified.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1283-1288
• /
• 2003

The friction heat generated by the CMP process hasinfluence on removal rate and WIWNU(Within Wafer Non-Uniformity). Therefore, the object of this study is to find the distribution of temperature on pad surface during CMP process. To do this, the authors analyse the kinematics of CMP equipment to verify the sources of friction heat and compare the analysis result with the experimental results. Through the analysis and experiment conducted in this paper, we can predict the distribution of polishing temperature across the pad surface. Furthermore the result could help to predict the process conditions which could enhance the polishing results, such as WIWNU and removal rate of thin film to achieve more efficient process.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.215-233
• /
• 2007

Even though the ad hoc Shewhart methods remain controversial due to various mathematical flaws, there is little disagreement among researchers and practitioners when a set of process data has a skewness distribution. In the context and language of process control, the error related to the process data shows that time to signal increases when a control parameter shifts to a skewness direction. In real-world industrial settings, however, quality practitioners often need to consider a skewness distribution. To address this situation, we developed an enhanced design method to utilize advantages of the traditional attribute control chart and to overcome its associated shortcomings. The proposed design method minimizes bias, i.e., an average time to signal for the shift of process from the target value (ATS) curve, as well as it applies a variable sampling interval (VSI) method to an attribute control chart for detecting a process shift efficiently. The results of the factorial experiment obtained by various parameter circumstances show that the VSI c control chart using nearly unbiased ATS design provides the smallest decreasing rate in ATS among other charts for all experimental cases.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.932-941
• /
• 1993

High moisture content of barley seeds, which were carried to the laboratory within 10 minutes after harvest, were stored in air tight bottle at constant temperature, and the individual moisture contents the grains were measured at predecided tim intervals. The theory of predicting the moisture movement between two kinds of different moisture content grains was tried to apply to the prediction of the moisture distribution and tried to apply to the prediction of the moisture distribution and the comparison of the predicted values with the observed dta showed the good suitability of the theory. The shape of the moisture distribution predicted form the theory were similar to the observed ones for the temperature range of 10 to $50^{\circ}C$. This study will be useful in designing the mix-storage facility or dryer.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.21-27
• /
• 2018

The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.04a
• /
• pp.290-307
• /
• 2008

The aim of this study was to estimate adverse effect on compression strength of corrugated fiberboard containers due to vibration during distribution process. Distribution environment such as road conditions and compression strength of corrugated fiberboard containers for selected agricultural products were studied. We found that increasing humidity does not effect significantly on natural frequencies of boxes, but results in accelerative effect to decrease compression strength of boxes. Box structures and product types also effect on loss of compression strength greatly.

• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.463-473
• /
• 2013

Through the development of efficient data collecting technologies like RFID, and inter-enterprise collaboration platforms such as web services, companies which participate in supply chains can acquire visibility over the whole supply chain, and can make decisions to optimize the overall supply chain networks and processes, based on the extracted knowledge from historical data collected by the visibility system. Although not currently active, the MeatWatch system has been developed, and is used in part for this purpose, in the imported beef distribution network in Korea. However, the imported beef distribution network is too complicated to analyze its various aspects using ordinary process analysis approaches. In this paper, we suggest a novel approach, called RFID-based supply chain process mining, to automatically discover and analyze the overall supply chain processes from the distributed RFID event data, without any prior knowledge. The proposed approach was implemented and validated, by using a case study of the imported beef distribution network in Korea. Specifically we demonstrated that the proposed approach can be successfully applied to discover supply chain networks from the distributed event data, to simplify the supply chain networks, and to analyze anomaly of the distribution networks. Such novel process mining functionalities can reinforce the capability of traceability services like MeatWatch in the future.

• Journal of the Korean Statistical Society
• /
• v.28 no.4
• /
• pp.515-522
• /
• 1999

A repair process of a system consisting of both perfect repairs and minimal repairs is introduced. The type of repair, when the system fails, is determined by an embedded two state Markov chain. We study several stochastic properties of the process including the preservation of ageing properties and the monotonicities of the time between successive repairs. After assigning repair costs to the process, we also show that an optimal repair policy uniquely exists, if the underlying life distribution of the system has DMRL.

• Industrial Engineering and Management Systems
• /
• v.15 no.2
• /
• pp.143-147
• /
• 2016

Uncertainty appears not only in real quantities but also in complex quantities. Complex uncertain process is essentially a sequence of complex uncertain variables indexed by time. In order to describe complex uncertain process, a formal definition of complex uncertain distribution is given in this paper, as well as the concepts of independence and variance. In addition, some properties of complex uncertain integral are presented.