1 |
Lee, W. Y., Choi, S. J., Lee, S. T., and Kim, H. B., "Development of Monitoring System for Super High-Speed Machining and Evaluation of Machinability of Difficult-to-cut Material," J. Korean Soc. Precis. Eng., Vol. 18, No. 10, pp. 208-213, 2001.
과학기술학회마을
|
2 |
Kim, K. S. and Lee, C. M., "Analysis of Moving Heat Source for Laser Assisted Machining of Plate by Feed Rate Control," J. Korean Soc. Precis. Eng., Vol. 28, No. 12, pp. 1341-1346, 2011.
과학기술학회마을
|
3 |
Kim, J. H., Choi, J. Y., and Lee, C. M., "Thermal Analysis for Laser Assisted Turning of Square Bar using Laser Heat Source Projection Method," J. Korean Soc. Precis. Eng., Vol. 28, No. 12, pp. 1353-1358, 2011.
과학기술학회마을
|
4 |
Pyung, H., Chang, S. H., and Wu, X., "Temperature Field and Thermal Stress Simulation of Solid Brake Disc Based on Three-dimensional Model," The Korean Society of Tribologists & Lubrication Engineers, Vol. 26, No. 1, pp. 31-36, 2010.
과학기술학회마을
|
5 |
Ahn, D. G., Byun, K. W., and Kang, M. C., "Thermal Characteristics in the Cutting of Inconel 718 Superalloy Using CW Nd:YAG Laser," J. Mater. Sci. Technol., Vol. 26, No. 4, pp. 362-366, 2010.
DOI
ScienceOn
|
6 |
Kim, Y. S. and An, S. C., "Numerical Analysis for Temperature Distribution and Thermal Stresses in a Turbocharged Large CNG Engine Piston," KIGAS Vol. 12, No. 4, pp. 58-62, 2008.
과학기술학회마을
|
7 |
Jung, J. W. and Lee, C. M., "A Study on the Cutting Tool and Holder Deformation Prediction undergoing Laser assisted Machining with Moving Heat Sources," J. Korean Soc. Precis. Eng., Vol. 26, No. 9, pp. 127-134, 2009.
과학기술학회마을
|
8 |
Kim, K. S., Kim, J. H., Choi, J. Y., and Lee, C. M., "A Review on Research and Development of Laser Assisted Turning," Int. J. Precis. Eng. Manuf., Vol. 12, No. 4, pp. 753-759, 2011.
과학기술학회마을
DOI
ScienceOn
|
9 |
SPECIAL METALS, "Inconel alloy 625," http://www.specialmetals.com/documents.html(Acces sed 13 Aug. 2013)
|