• 조명전기설비학회논문지
• /
• 제24권1호
• /
• pp.85-90
• /
• 2010

본 논문은 기존 분산전원 신뢰도에 관한 연구를 기반으로, 여러 구역전기사업자로 인해 분산전원의 소유권과 수용가에 대한 전력공급 책임이 분리된 배전계통에 적용할 수 있는 신뢰도 해석기법을 제안한다. 구역전기사업자는 자신의 수용가에게 양질의 전력서비스를 제공할 의무가 있으므로, 계통사고시 자신의 분산전원 비상전력을 자신의 수용가에게 우선적으로 공급하는 비상대책을 선호한다. 기존 신뢰도 해석기법에서는 하나의 운영주체가 모든 전력원과 전력망을 관리하기 때문에, 여러 구역전기사업자가 존재하는 계통운영 상황에서 분산전원의 소유권을 별도로 고려하지 않는 해석결과는 실제 신뢰도 지수와 차이를 보일 수 있다. 본 논문의 사레연구에서는 RBTS 2번 모선에 2개의 구역전기사업자가 존재하는 경우를 모의하였으며, 기존 기법과 제안된 기법의 신뢰도 지수 결과를 비교하여 제안된 기법의 유효성을 증명하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.64-65
• /
• 2017

The existing hot and cold water supply system have a few problems such as construct ability, damage of the building, maintenance and the unequal distribution of water supply flow. So the system has needs to be improved and the Flow Equal Distribution System(FEDS) in series connection has been innovated by Idin Lab which relieve the existing problems. Thus, the purpose of this study is aimed to show the merits of FEDS with an real example of construction site of Wirye Terrace, D builder. 1. FEDS enables builders to save construction cost as the system in series connection does not need to equip both allotters and loop piping system. 2. FEDS contains a cartridge of water saving function so it mainly reduce the unequal distribution of flow and sudden temperature deviation of hot water supply at the same time. 3. FEDS allows repairer to maintain the water supply system at the same floor that could get rid of disharmony between dwellers who live the upper/lower story of the same building. Therefore, the FEDS will be applied when the building is remodeled and constructed.

• 한국인터넷방송통신학회논문지
• /
• 제18권4호
• /
• pp.155-159
• /
• 2018

본 논문은 수산물의 생육환경을 위하여 현장관리자가 원격으로 모니터링할 수 있는 시스템을 설계 제작하였다. 활수산물의 유통과정에서 발생할 수 있는 문제점은 시스템과 환경 모니터링을 모듈화시켜 해결하였다. 모의실험을 위하여 컨테이너 내부에 산소공급장치와 슬러지 처리장치, 모니터링 시스템을 설계하고 유통환경을 구축하여 실시간으로 모니터링 할 수 있도록 하였다. 또한 데이터베이스 및 통신환경으로 모니터링 시스템을 구축하였으며 센서를 통하여 생육에 맞는 최적의 환경을 마련하였다. 그 결과 수산물의 저장 및 유통을 위한 환경 모니터링을 할 수 있었으며 적합한 활수산물 관리시스템을 구축할 수 있었다.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.365-369
• /
• 2015

In this paper, geographic information system(GIS) for an intelligent power distribution network was implemented with location informations acquired from automatic meter reading system, where the location informations of power line communication(PLC) modems installed at customer side were collected at data concentration units(DCUs) of headend equipment via PLC and then were transmitted to front end processor server. By displaying the connection status of the power distribution network on GIS map, operation of advanced metering infrastructure(AMI) or management of power grid system could be performed intuitionally and in real time, because the configuration state of the power grid could be easily monitored. The feasibility of the proposed system was confirmed with the especially constructed laboratory-level test bed and the verification test of the system will be carried out for a real power distribution network.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.149-154
• /
• 1991

The one of the important problems in the design of queueing systems is the decision of the order of service stations. The object of this problem is the decision of the order that minimizes the expected sojourn time per customer in the given arrival process and service time distributions. In this paper, the tandem queueing system in series is studied with the emphasis on the optimal order of the tandem queueing system which has three stations with single servers. In one system, customers arrive at the first station with Poisson process. This system is composed of service stations with a constant, a general distribution and a Exponential distribution is studied. To select the optimal order after the orders of each pair of two stations is decided, it is compared the two orders of system. With this results, total expected delay of the systems which has three stations is compared. The result is the best that service station with constant time is on the first place, then the service station with general distribution and the service station with Exponential distribution is followed. And the other system is consist of service stations with a constant and two probabilistic distributions. In this case, two probabilistic distributions has a non-overlapping feature. It is the optimal order that the service station with constant time is on the first place then the service station with longer service time and the service station with shorter service time is followed.

• 한국항해학회지
• /
• 제15권3호
• /
• pp.13-24
• /
• 1991

This paper aims to determining the optimal capacity of Pusan port in view point of Container Physical Distribution cost. It has been established a coast model of the container physical distribution system in Pusan port is composed of 4 sub-systems and in-land transport system. Cargo handling system, transfer & storage system and in-land transport system, and analyzed the cost model of the system. From this analysis, we found that the system had 7 routes including in-land transport by rail or road and coastal transport by feeder ship between Pusan port and cargo owner's door. Though railway transport cost was relatively cheap, but, it was limited to choose railway transport routes due to the introducing of transport cargo allocation practice caused by shortage of railway transport capacity. The physical distribution ost for total import & export container through Pusan port was composed of 4.47% in port entring cost, 12.98% in cargo handling cost, 7.44% in transfer & storage cost and 75.11% in in-land transport cost. Investigation in case of BCTOC verified the results as follows. 1) The optimal level of one time cargo handling was verified 236VAN (377TEU) and annual optimal handling capacity was calculated in 516, 840VAN(826, 944TEU) where berth occupancy is $\rho$=0.6 when regardless of port congestion cost, 2) The optimal level of one time cargo handling was verified 252VAN (403TEU) and annual optimal handling capacity was calculated in 502, 110VAN (803, 376TEU) where berth occupancy is $\rho$=0.58 when considering of port congestion cost.

• 한국정보기술학회 영문논문지
• /
• 제10권2호
• /
• pp.91-101
• /
• 2020

Recently, the demand for high penetration of variable renewable energy (VRE) penetration in a power system is increased. In consequence, distribution systems including microgrids confront the increased installation of VRE-based distributed generation. Despite of the high demand of VRE-based distributed generation in a distribution system, the installation of photovoltaic (PV) system in a distribution system has been restricted by various problems. In other words, the hosting capacity for high VRE penetration in a distribution system is limited. This paper analyzes the improvements of hosting capacity VRE penetration of stand-alone microgrid (SAMG) with energy storage system (ESS) by considering virtual-slack (VS) control based on power sensitivity. With the pre-defined power sensitivity, the ESS operates as virtual slack in the SAMG by controlling its bus voltage and phase angle indirectly. Therefore, the ESS enables the increase of VRE penetration in the SAMG. The proposed VS control is realized by analyzing the ESS as a virtual slack in power flow analysis based on power sensitivity. Then its validity is demonstrated with the case study on the SAMG in South Korea with practical data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1254-1257
• /
• 2002

This study presents the configuration schemes for railway power distribution system. The possible alternatives are derived and reviewed on the basis of power quality, reliability, and economic aspects. As a result, a few of configuration schemes are recommended for railway power distribution system

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.62-63
• /
• 2005

Recently, sectionalizing switches have been coming to be operated by remote control through the distribution SCADA system. However, the problem of determining the optimal switching sequence is a combinatorial optimization problem, and is quite difficult to solve, Hence, it is imperative to develop practically applicable solution algorithms create a new arbitral distribution system configuration from an initial configuration, and some of these algorithms do not show a load transfer sequence to reach the objective system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.381-383
• /
• 2004

Recently, sectionalizing switches have been coming to be operated by remote control through the distribution SCADA system. However, the problem of determining the optimal switching sequence is a combinatorial optimization problem, and is quite difficult to solve. Hence, it is imperative to develop practically applicable solution algorithms create a new arbitral distribution system configuration from an initial configuration, and some of these algorithms do not show a load transfer sequence to reach the objective system.