• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.05
• /
• pp.88-91
• /
• 1994

We develope a assistant system of foot pressure distribution for improvement gait Pattern, adapted working speed, and minimitation of muscle fatigue of the sensory feedback type FES system(SEFES). This measurement system consist of mat type pressure sensor with piezo electric films. The pressure data signal multiflexed input scanning method processed A/D conversion after two step amplify and integrate. Matrix sensor interface to PC for pseudo color display by level of Pressure distribution data. This measurement system clinically evaluated in hemiplegic patients. It has produced acceptable results with optimal location of the food sensor's pressure point and avoid the muscle fatigue.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1901-1902
• /
• 2006

In recent years, it has been a worldwide trend that many power utilities gave their attention to develop and operate their power plants, substation and distribution systems. Following this trend, KEPCO(Korea Electric Power Corporation) has developed many electric automation systems with various communication networks. It has been natural that the automation systems are just focused on to remote devices when they come to be designed. But, we have to shift the focus to the automation system itself. We have developed the Multi-service Optical Transmission System (M-OTS) for electrical power systems. It can be adopt to not only distribution power field but also the transmission power field. The result strongly shows that the system is potentially beneficial in reliability, speed, and expandability. This paper presents some of initial design efforts and results toward a KEPCO's communication system in distribution areas.

• Journal of the Korea Society for Simulation
• /
• v.3 no.2
• /
• pp.49-56
• /
• 1994

Performance measurement and analysis for computer systems has been studied for a long time. However, little attention has been focused on how to distribute a given budget to each part of a computer system for enhancing system performance maximally. In traditional approaches, performance enhancement is achieved by identifying a dominant system bottleneck and enhancing the bottleneck's performance. These approaches, however, often bring problems since the removal of a bottleneck may result in other bottlenecks. This paper proposes an approximated method for such budget distribution problem. For budget distribution, a critical set is defined. The set contains the servers of which performance changes affect the overall system performance significantly. Then, the given budget is distributed properly to every server in the critical set. To verify the proposed method, two benchmark experiments are carried out I SLAM environments. The experimental results show that the proposed method provides better results than the traditional method does in many cases.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.17-23
• /
• 2016

In this paper, we propose a model of the collaborative authoring tool and its implementation results. In the 'collaborative authoring and automatic distribution system,' users can create eBooks by using partial works (primary and edited sources) on the basis of copyright information registered by the primary author. The Collaborative Authoring Tool is a part of "the collaborative authoring and automatic distribution system" developed through research on "the development of key technologies of social work protection and content mashup tools" as an R&D project granted by the Korea Copyright Commission from 2013. In the collaborative authoring and automatic distribution system, authors of primary sources such as images, audio clips and video clips for eBooks can register them together with the copyright information; users can edit the primary sources to produce secondary sources and in turn register the secondary sources on the system; and users can create and distribute eBooks by using the sources registered in the system.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.198-209
• /
• 2002

To assess deep geological environment for the research and development of hish-level radioactive waste disposal, six boreholes of 3" in diameter were installed in two granitic areas. An areal extent of the rock block scale in the study sites was estimated by the lineament analysis from satellite images and shaded relief maps. The characterization of fracture system developed in rock block scale was carried out based on the acoustic televiewer logging in deep boreholes. In the Yuseong site, the granite rock mass was divided into the upper and lower zones at around -160m based on the probabilistic distribution characteristics of the geometric parameters such as orientation, fracture frequency, spacing and aperture size. Since the groundwater flow is dependent on the fracture system in a fractured rock mass, the correlation of the fracture frequency and cumulative aperture size to the hydraulic conductivity was also discussed.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.555-557
• /
• 1997

This paper discusses a set of critical requirements in building and using a shared, integrated information management system for power distribution management and control. It then proposes a modem, object-oriented information system model for building such a system based on the current state of arts in database, GIS, and WWW technologies. The key of the proposal is that the shared database system should be the basis of integration efforts in power distribution management and control. A small-scale prototype is being developed to demonstrate the effectiveness of the proposed model.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.21-22
• /
• 2008

The increase of fault current due to larger power demand has caused the capacity of power machines in grid to increase. To protect the power system effectively from the increased fault current, the superconducting fault current limiter (SFCL) have proposed one of several countermeasures. Therefore, to introduce SFCL into power distribution system, the position of SFCL in power distribution system is selected among some cases. Each position changes fault current limiting characteristics and SFCL's requirement. In this paper, the characteristics of limiting fault current according to installed SFCL's location in power distribution system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2279-2280
• /
• 2008

When electric power systems expand and become more interconnected, the fault current levels increase in the distribution system. Therefore, we studied the influence of the power system according to application of a resistive FCL. In this paper, the distribution system and the resistive FCL were modeled by using EMTP (Electromagnetic Transients Program), which simulates the effect of the resistive FCL for the single line ground fault in distribution system.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.243-244
• /
• 2015

Power system has been improved during for a long time by customers demand. Power suppliers has researched the power system component for more electricity transmission. One of the research is apply the thermal conductors in new cable. The operational temperature of thermal conductors is higher than normal aluminum that thermal conductor is composed of aluminum, Zr(zirconium) and etc. Increase of operational temperature is growth of the transmission capability. Power suppliers was concerned about the increase of operation temperature by thermal conductors. Therefore, the thermal conductor has the possibility that expanded application in power system. In this paper analysed effect of thermal conductor in power distribution system.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.521-522
• /
• 2015

Many countries concern about environmental problems. Therefore, they have made regulation for mandatory reduction of greenhouse gases. Electric Vehicles(EVs) are one of the most effective counterproposals for it. EVs are usually charging for it by using actual distribution system of the Korea Electric Power Corporation(KEPCO). However, it could cause adverse effects such as increase of the power demand and voltage variation on the distribution system. To reduce adverse effects for demand power side, in this paper, charging for EVs by using PV(Photovolatic Power Generation) connected with ESS(Energy Storage System) are modeled by using Electro Magnetic Transient Program(EMTP). And then, the simulation results are compared with EVs that are connected to the distribution system of KEPCO for using charge.