• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.199-206
• /
• 2003

흙을 나타내는 가장 기본적인 물리적 성질중의 하나가 흙을 구성하는 입자들의 입도분포이며, 입도분포특성을 분석하기 위해 최근에 대두되고 있는 방법중의 하나가 프랙탈 이론이다. 본 연구에서는 fragmentation 프랙탈을 이용하여 흙의 입도분포곡선의 특성을 파악하였다. Fragmentation 프랙탈을 표현하는 방법에는 ‘개수-입경’프랙탈과 '중량-입경' 프랙탈이 있으며, 본 연구 결과, '중량-입경' 방법이 더 실용적이었다. 균등계수($C_{u}$)가 4이하에서는 균등계수가 증가함에 따라 프랙탈차원($D_{tot}$)이 급격히 증가하였으나, 균등계수가 6이상에서는 일정한 값에 수렴되는 결과를 나타냈다. 곡률계수($C_{c}$)가 3이상에서는 프랙탈차원은 크기가 작은 입자들의 영향을 받고, 곡률계수가 3이하에서는 큰 입자들의 영향을 받는 것으로 나타났다. 유효입경($D_{10}$)의 크기에 따른 프랙탈차원의 변화를 분석한 결과, 균등계수와 곡률계수가 같을 경우 프랙탈차원은 유효입경의 크기에 영향을 거의 받지 않는 것으로 나타났다. 전체 입자의 크기분포를 고려할 수 있는 프랙탈 개념을 입도분석에 적용하는 것이 바람직할 것으로 판단되며, 향후 프랙탈차원과 흙의 공학적 특성과의 관계정립에 대한 지속적인 연구가 필요하다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.721-724
• /
• 2006

In this study, particle size distribution of cement powder system were adjusted using the blast furnace slag powder, Blaine $2250cm^2/g\;and\;8300cm^2/g$, which easy to adjust particle size distribution to examine how particle size distribution of the binder has an effect on rheological properties of the cement paste. In addition, the relationship between n-value of Rosin-Rammler function and plastic viscosity were discussed. All measured flow curves represented thixotropy behavior and the hysteresis area was smaller for the more added coarse particle. When the combination was based on a ratio of $20{\sim}25vol%$ fine particles, $30{\sim}40vol%$ OPC and $40{\sim}45vol%$ coarse particles of the total volume, a high fluidity and low yield strength was achieved.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권1호
• /
• pp.55-61
• /
• 1992

To determine the effect of time after feeding on distribution of particle size of digesta in the gastrointestinal tract, 16 sheep given orchardgrass first cut hay were slaughtered at 2, 8, 16 and 24 hours after feeding and digesta in diverse sites of the tract were sieved into four fractions of particle size larger than $1180{\mu}m$, 300-1180, 45-300 and less than 45. Following results were obtained: 1) In the reticulo-rumen, the proportion of particles larger than $1180{\mu}m$ decreased with the time after feeding, while the other particle size fractions did not change with time after feeding. 2) In the post-ruminal alimentary tract, the proportion of particles larger than $1180{\mu}m$ was significantly smaller than that in the reticulo-rumen and distribution of fractions of every particle size stayed consistently at about the same level irrespective of the time after feeding. 3) In the cecum, the fraction of particle size less than $45{\mu}m$ appeared to be selectively retained when the passage rate was considered.

• 로봇학회논문지
• /
• 제12권3호
• /
• pp.332-338
• /
• 2017

As an interpretation of existing jamming effects, the main variables affecting the increase in stiffness due to jamming are known as system density, jamming density, pressure, and particulate temperature. The main variable, jamming density, is closely related to the distribution of particle size and contact properties such as particle shape and friction. However, the complexity of these variables makes it difficult to fully understand the mechanism of the jamming effect. In this paper, we focus on the jamming effects of particles that have more elastic properties than particles such as sand and coffee powder, which are commonly used as constituent particles of existing jamming, in order to reduce complicated factors such as temperature and concentrate on jamming effects based on elastic characteristics of particles. It was experimentally explored the possibility of increasing stiffness by mixing particles of different sizes rather than simply increasing the bending stiffness by controlling the particle size. Through simulations and experiments, we found a case where the stiffness of each particle size distribution is larger than the stiffness of each particle size.

• 한국식품영양과학회지
• /
• 제32권3호
• /
• pp.370-374
• /
• 2003

홍삼 분쇄의 신 가공 기술로서 비충격 분쇄방식인 cell cracker의 공장 적용 가능성을 제시하고 홍삼분말의 품질고급화에 기초자료로 활용하고자, 기존의 hammer mill(충격분쇄방식)과 cell cracker에 의한 분쇄방식으로 홍삼분말을 제조한 후 물성, 표면구조적 특성 및 관능적 특성을 측정하였다. 입도분석에서 sieve shaker로 분석한 결과, 100 mesh 이상은 모두 95%수준으로 비슷한 분포를 나타냈고 120 mesh 이상은 hammer mill로 분쇄한 홍삼분말이 높았으며 그 밖의 각 mesh별 입도분포는 큰 차이를 나타내지 않았다. Laser scattering analyzer로 분석한 결과 hammer mill로 분쇄한 홍분말의 입도분포는 최소 0.77$\mu\textrm{m}$에서 최대 128.07$\mu\textrm{m}$으로, cell cracker로 분쇄한 홍삼분말 4.24~180.07$\mu\textrm{m}$보다 분포가 넓었으며, 평균 입자 크기는 cell cracker로 분쇄한 홍삼분말이 크고 표준편차는 hammer mill로 분쇄한 홍삼분말이 크게 나타났다. 비표면적은 hammer mill로 분쇄한 홍삼분말이 1.42 $m^2$/g로 cell cracker로 분쇄한 홍삼분말 0.59 $m^2$/g보다 높게 나타났고, 표면구조적 특성은 hammer mill로 분쇄한 홍삼분말은 크고 작은 입자가 불균일하게 분포하고 있으며, 개별입자의 형태는 부등형의 거칠게 연마된 돌 모양에 가깝고 표면은 작고 부드러운 솜털모양을 하고 있는 반면에, cell cracker로 분쇄한 홍삼분말은 입자크기가 상대적으로 고르게 분포하고 있으며 개별입자의 형태는 부등형의 조각난돌 모양의 형태로 관찰되었다.

• 한국환경보건학회지
• /
• 제44권4호
• /
• pp.360-369
• /
• 2018

Objectives: Outdoor tobacco smoke can penetrate into the indoor environment through cracks in the building envelope. This study aimed to characterize the particle size distribution of infiltrated secondhand smoke (SHS) through the gap in a single glazed and a secondary glazed window according to pressure differences in a chamber. Methods: Two polyvinyl chloride sliding windows were evaluated for infiltration, one with a glazed window and the other with a secondary glazed window. Each window was mounted and sealed in a polycarbonate chamber. The air in the chamber was discharged to the outside to establish pressure differences in the chamber (${\Delta}P$). Outdoor smoking sources were simulated at a one-meter distance from the window side of the chamber. The particle size distribution of the infiltrated SHS was measured in the chamber using a portable aerosol spectrometer. The particle size distribution of SHS inside the chamber was normalized by the outdoor peak for fine particles. Results: The particle size distribution of SHS inside the chamber was similar regardless of window type and ${\Delta}P$. It peaked at $0.2-0.3{\mu}m$. Increases in particulate matter (PM) concentrations from SHS infiltration were higher with the glazed window than with the secondary glazed window. PM concentrations of less than $1{\mu}m$ increased as ${\Delta}P$ was increased inside the chamber. Conclusions: The majority of infiltrated SHS particles through window gap was $0.2-0.3{\mu}m$ in size. Outdoor SHS particles infiltrated more with a glazed window than with a secondary glazed window. Particle sizes of less than $1{\mu}m$ were associated with ${\Delta}P$. These findings can be a reference for further research on the measurement of infiltrated SHS in buildings.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.147-154
• /
• 1995

Abnormal grain growth behavior of BaTiO3 ceramics with controlling of particle size distribution of calcined powder was investigated. The particle size distribution was controlled by changing the calcining temperature or by using of classification and regrinding process. With broadening of the normallized size distribution in calcined powder, it showeda normal grain growth behavior in sintered body due to an increase of volume fraction of seed grain in the calcined powder. It was supposed that the seed grains could easily contact each other for the rapid grain growth during sintering process and resulted in fast switching-over from abnormal to normal grain growth stage.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.43-44
• /
• 2017

In this study, mortar strength was measured by grinding oyster shell and changing the particle size distribution. For the experiment, the oyster shells were processed to a fine aggregate size of 10mm or less. In this experiment, seven particle size distribution conditions were selected and tested. Because oyster shells are different in density from sand, their volume ratios were calculated and converted to mass ratios of 1: 3. The strength test was carried out one day after the steam curing.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.20-25
• /
• 2020

The effect of the isocyanate index (NCO index) on the particle size and particle size distribution of a waterborne polyurethane dispersion (WPUD) with polycarbonate-diol was determined. The WPUDs were prepared using a conventional acetone process with polycarbonate-polyol (M_n = 2028), 4,4'-methylenebis(cyclohexyl isocyanate) (H₁₂MDI), 2,2-bis(hydroxymethyl) propionic acid (DMPA), and dibutyltin dilaurate catalyst. At NCO index values below 1.5, the number average particle diameter of the WPUDs significantly increased with the NCO index, whereas the particle diameter slightly varied at higher NCO indexes. The dependency of the WPUD viscosity on the NCO index exhibited similar behavior to that of the particle size. The relative values of the full width at half maximum of the WPUD particle distribution curves at various NCO indexes were not influenced by the NCO index.

• 한국염색가공학회지
• /
• 제15권5호
• /
• pp.327-332
• /
• 2003

In this study, the polyurethane microcapsules for non-aqueous dyeing containing iron oxide and disperse dyes were prepared by in-situ polymerization method using hexamethylene diisocyanate(HDI) with ethylene glycol(EG). And the size, shape, and particle size distribution of microcapsules prepared were investigated. The size and shape of microcapsule were observed by optical microscope and scanning elecron microscope. The particle size distribution was analyzed by particle size analyzer. The microcapsule size and its distribution were largely effected by the existance of surface active agent in the system. When a surfactant did not exist in the system, the size distribution of microcapsules prepared was much uneven. By adding a surfactant, this phenomenon was disappeared. And the size of microcapsule was also effeced by the hydrophobicity of core material(disperse dye). It was considered due to the difference of dispersity of core materials. And the size of microcapsule prepared was inversely proportional to the stirring speed.