• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.74-78
• /
• 2009

This paper explains the design and implementation of the FDA(Fault Detection Agent) based on IP-USN. FDA is a system that is suitable for detecting software error for multimedia distance education running on home network environment based on IP-USN. This system consists of an ED, and ES. ED is an agent that detects an error by hooking techniques for multimedia distance education based on IP-USN environment. ES is an agent that is an error sharing system for multimedia distance education based on IP-USN environment.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.355-357
• /
• 2005

The distance between objects and a service robot can be measured by stereo vision system, but the two cameras need the same number of image grabber boards. In this paper, an approach to measure the distance is presented by using one camera which moves horizontally via motor position control. Images are captured at two different places where we know, and distance calculation is performed with the images and the camera position data. With a simple algorithm the proposed system requires only one image grabber board and no camera sequence controls are necessary, which resuces the system costs.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.305-307
• /
• 2003

This paper presents an apparent impedance calculation procedure for distance relaying of transmission line involving FACTS (Flexible AC Transmission System) devices, particularly the UPFC (Unified Power Flow Controller), between Kangjin and Jangheung in Korea. With the changes of UPFC's parameters, the measurement and protective range (trip boundaries) of the adaptive distance relay can also be changed. So, it is the most important part in the field of system protection to analyze the operating characteristic of relaying system. The presence of UPFC significantly affects the trip boundaries which are also adversely affected by fault resistance combined with remote end infeed. This paper presents the apparent impedance calculations and the distance relay setting characteristics for faults involving the UPFC in the KEPCO system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.1-10
• /
• 2011

This paper addresses the analysis of the travel distance and order picking time of the vehicle in a aisle when items are picked by the batch in a warehouse system. Batching is to combine several orders in a single tour of the storage/retrieval machine. An advantage of batching is that the length of a tour for a batch of orders is shorter than the sum of the individual orders' tour lengths. The average travel distance and order picking time when a batch is picked in a aisle of the warehouse systems are analyzed for the batch size. And when the vehicle is idle, the dwell point of the vehicle to minimize to the response distance is analyzed. As the batch size is increased, average order picking time per item is decreased. The problem is analyzed and a numerical example is showed to explain the problem.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.103-108
• /
• 2011

This paper is related radio interference from inductive system to radio device in home and industrial environment according to increasing the usage of inductive system. In order to analyze interference from magnetic field strength of inductive system, interference model was suggested and explain the method to calculate separation distance by using conversion that from magnetic field strength to magnetic dipole moment based on suggested interference model. Also, scenario that interference occur between inductive system and radio device was shown and the separation distance between inductive system and radio device was calculate with that scenario. The suggested method in this paper will be used to secure the compatibility between inductive system and radio device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1300-1305
• /
• 2012

In this research, we propose a momentum measurement system using the accelerometer sensor, MCU, and Bluetooth to measure the exact momentum. The proposed system can figure out information for the real time travel distance. We performed various experiments, and analyzed the results using the proposed momentum measurement system. In the simulation experiments, we compared the reliability and accuracy for the existing momentum measurement systems from the analyzed results. The proposed system showed travel distance error of less than 8% as compared to the existing system with the error of approximately 13%. We expect that the proposed system apply to the commercial products.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.81-85
• /
• 1992

Quality of cut is strongly dependent on the cutting pressure, so this relationship can be identified by pressure measuring system. In this paper, the experiments presented were performed with the devised pressure measuring system and the laser cutting of STS 304. Convergent type and convergent-divergent type nozzle were used for pressure variation of the distance between nozzle and workpiece. In laser cutting of STS 304, 1.0 kW CO $\_$2/ laser used. The convergent type nozzle(1.0 mm diameter) pressured above 3 kgf/cm $\^$2/, the MSD(Mach Shock Disk) created, which caused the the pressure variations of the distance between nozzle and workpiece. The maximum cutting pressure exists in accordance with the variation of distance. In spite of far distance the maximum cutting pressure is achieved by using the pressure measuring system. The higher cutting pressure beneath the workpiece the less quantity of dross and the kerf width. Since the higher cutting pressure helps to remove the quantity of dross and to stop the exothermic energy into the material. The optimum laser cutting parameter of STS 304(2.0 mm thickness) with the convergent type nozzle(1.0 mm diameter)is 0.75 mm and 2.5 mm distance between nozzle and workpiece, 4 kgf/cm $\^$2/ cutting pressure. In 3.0 mm thickness case, 1.5 mm and 2.25 mm distance is achieved for good quality.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.697-703
• /
• 2006

This article proposes a new technique for the reduction of vibration and noise in the geared system by adjusting the distance between gear shafts. The vibration and noise may be produced by the abnormal force applied to the tooth face. And the force may be the cause of ununiform velocity in the driven shaft. If the velocity is obtained to be uniform by adjusting the distance between shafts. the vibration and noise may be reduced to some extent. In order to review, a dynamic analysis model for the gear train used in a mill turret and a test rig are developed. The velocities in the driven shaft are calculated by dynamic simulations for the model and noises in the test rig are measured with varying of the distance between shafts. The comparison of simulation and test data shows that the distance between shafts at the most uniform velocity has the lowest level of noise.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.537-543
• /
• 2006

A method of estimating the distance using single zoom camera limits a distance range(only optical axis) in field of view. So, in this paper, we propose a method of estimating the distance information in Stereoscopic display using the stereo zoom lens module for estimating the distance in the wide range. The binocular stereo zoom lens system is composed using a horizontal moving camera module. The left and right images are acquired in polarized stereo monitor for getting the conversion and estimating a distance. The error distance is under 10mm which has difference between optically a traced distance and an estimated distance in left and right range $(0mm{\sim}500mm)$ at center. This presents the system using a function of the zoom and conversion has more precise distance information than that of conversion control. Also, a method of estimating a distance from horizontal moving camera is more precise value than that from toe-in camera by comparing the error distance of the two camera methods.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.6
• /
• pp.323-329
• /
• 2010

The edit distance problem is finding the minimum number of edit operations to transform a string into another one. It is one of the important problems in algorithm research and there are some algorithms that compute an optimal edit distance for the one-dimensional languages such as the English alphabet. However, there are a few researches to find the edit distance for the more complicated language such as the Korean or Chinese alphabet. In this paper, we define the measure of the edit distance for the Korean alphabet with the phoneme classification system to improve the previous edit distance algorithm and present an algorithm for the edit distance problem for the Korean alphabet.