Browse > Article
http://dx.doi.org/10.5050/KSNVN.2006.16.7.697

A Study on the Vibration/Noise Reduction of a Gear Driving System by Adjusting the Distance between Gear Shafts  

Kim, Chea-Sil (창원대학교 메카트로닉스공학부)
Lee, Won-Chang (창원대학교 산업기술연구원)
Lee, Jong-Pan ((주)EWS코리아)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.16, no.7, 2006 , pp. 697-703 More about this Journal
Abstract
This article proposes a new technique for the reduction of vibration and noise in the geared system by adjusting the distance between gear shafts. The vibration and noise may be produced by the abnormal force applied to the tooth face. And the force may be the cause of ununiform velocity in the driven shaft. If the velocity is obtained to be uniform by adjusting the distance between shafts. the vibration and noise may be reduced to some extent. In order to review, a dynamic analysis model for the gear train used in a mill turret and a test rig are developed. The velocities in the driven shaft are calculated by dynamic simulations for the model and noises in the test rig are measured with varying of the distance between shafts. The comparison of simulation and test data shows that the distance between shafts at the most uniform velocity has the lowest level of noise.
Keywords
Kinematics; Noise; Vibration; Distance Between Gear Shafts; Gear Driving System;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Cho, Y. S. and Choi, Y. S., 2001, 'Nonlinear Vibration of Gear Pair System with Transmission Error and Backlash' , Proceedings of the KSNVE Autumn Annual Conference, pp. 73 - 78
2 Chang, I. D. and Kim, B. S., 2005, 'An Experimental Study on the Torsional Excitation Source of the Vehicle Driveline' , Transactios of the Korean Society for Noise and Vibration Engineering, Vol. 15, No. 7, pp. 865 - 870   과학기술학회마을   DOI   ScienceOn
3 Masuda, T., 1986, 'Prediction Method of Gear Noise Considering the Influence of the Tooth Flank Finishing Method' , Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 108, pp, 95 - 100   DOI   ScienceOn
4 Kahraman, A. and Singh, R., 1990, NonLinear Dynamics of a Spur Gear Pair, Journal of Sound and Vibration, Vol. 142, No.1, pp. 49 - 75   DOI   ScienceOn
5 Winter, H. and Gerber, H., 1989, 'Investigation on the Excitation of Vibration and Noise at Spur and Helical Gears' , ASME Power Transmission Conference, Vol. 2, pp. 765 -772
6 Cai, Y. and Hayashi, T., 1992, 'The Optimum Modification of Tooth Profile for a Pair of Spur Gears to make its Rotational Vibration Equal Zero' , ASME International Power Transmission and Gearing Conference, Vol. 20, pp. 453 - 460
7 Erdman, A. G. and Sandor, G. N., 1998, 'Mechanism Design Analysis and System Volum1 Third Edition' , Prentice Hall, Inc., pp. 1 - 6