• KIEE International Transactions on Power Engineering
• /
• 제4A권1호
• /
• pp.26-32
• /
• 2004

Digital technology has advanced significantly over the years both in terms of software tools and hardware availability. It is now applied extensively throughout many area of electrical engineering including protective relaying in power systems. Digital relays have numerous advantages over traditional analog relays, such as the ability to accomplish what is difficult or impossible using analog relays. Although non real-time simulators like PSCAD/EMTDC are employed to test the algorithms, such simulations are disadvantaged in that they cannot test the relay dynamically. Hence, real-time simulators like RTDS are used. However, the latter requires large space and is very expensive. This paper uses EMTP MODELS to simulate the power system and the distance relay. The distance relay algorithm is implemented and the distance relay is interfaced with a test power system. The distance relay's performance is then assessed interactively under various fault types, fault distances and fault inception angles. The test results show that we can simulate the distance relay effectively and we can examine the operation of the distance relay very closely including its drawbacks/limitations by using EMTP MODELS. Equally important, this approach facilitates any changes that need to be carried out in order to enhance the Distance Relay under test/examination.

• 전자공학회논문지B
• /
• 제32B권6호
• /
• pp.886-898
• /
• 1995

One of the ways to measure the distance in the computer vision is to use the focus and defocus. There are two methods in this way. The first method is caculating the distance from the focused images in a point (MMDFP: the method measuring the distance to the focal plane). The second method is to measure the distance from the difference of the camera parameters, in other words, the apertures of the focal planes, of two images with having the different parameters (MMDCI: the method to measure the distance by comparing two images). The problem of the existing methods in MMDFP is to decide the thresholding vaue on detecting the most optimally focused object in the defocused image. In this case, it could be solved by comparing only the error energy in 3x3 window between two images. In MMDCI, the difficulty is the influence of the deflection effect. Therefor, to minimize its influence, we utilize two differently focused images instead of different aperture images in this paper. At the first, the amount of defocusing between two images is measured through the introduction of regularization and then the distance from the camera to the objects is caculated by the new equation measuring the distance. In the results of simulation, we see the fact to be able to measure the distance from two differently defocused images, and for our approach to be robuster than the method using the different aperture in the noisy image.

• 한국지능시스템학회논문지
• /
• 제15권6호
• /
• pp.668-672
• /
• 2005

본 논문에서는 이동로봇의 저가형 위치인식센서로 적합한 PSD(Position Sensitive Detector)센서를 이용하여 거리계측시스템을 개발하였다. PSD 센서는 거리-전압 출력이 비선형적인 단점을 가지고 있어 센서의 특성실험을 통해 선형화가 가능한 변환함수를 제안하였다. 제안한 방법을 검증하기 위하여 거리계측시스템의 하드웨어 및 소프트웨어를 구성하였다 또 피측정체의 색상 및 재질에 따른 출력특성을 실험하고 거리-전압 데이터를 측정하였다. 실측한 데이터를 바탕으로 제안한 선형화함수의 계수를 추출하였다. 마지막으로 제안한 함수에 의한 거리와 실제거리를 비교하여 시스템의 성능 및 정확성을 검증하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제5권1호
• /
• pp.63-70
• /
• 1982

In order to estimate characteristics and functions of multi hole focusing type collimator, the authors measured the sensitivity and resolution varing with the distance between the face of collimator and source by experimental study. The results obtained with this study are as follows. 1. In comparison with focal distance obtained fram sensitivity measurement of various multi hole focusing type collimator, collimator A, C, E was 10 cm and collimator B, D was 12 cm in focal distance. 2. In regard of resolution of collimators having 10 cm focal distance, collimator A showed the finest resolutions than any other collimator(C, E). 3. By comparison regarding sensitivity by focal dist ante, the shorter the distance than a give focal distance of collimator, the worse the sensitivity of collimator. 4. With regard to resolution by focal distance, the shorter the distance than a given focal distance of collimator, the worse the resolution of collimator.

• 대한전자공학회논문지SP
• /
• 제37권6호
• /
• pp.38-47
• /
• 2000

Bhattacharyya distance는 패턴 분류 문제에 있어서 클래스간 분리도 측정의 수단으로 사용되어 왔으며 특징 추출 시 유용한 정보를 제공한다. 본 논문에서는 최근 발표된 Bhattacharyya distance를 이용한 에러 예측 기법을 이용하여 예측된 분류 에러가 최소가 되는 특정 벡터를 추출하는 방법에 대하여 제안한다. 제안한 특징 추출 기법은 최적화 알고리즘인 전체탐색 및 순차탐색 방법의 적용 시 분류 에러를 직접 구하지 않고 Bhattacharyya distance를 이용하여 분류 에러를 예측하므로 고차원 데이터의 경우 고속의 특징 추출이 가능하며, 에러 예측 성질을 이용하여 패턴 분류 시 필요한 최소 특징 벡터의 수를 예측할 수 있는 장점이 있다.

• 가족자원경영과 정책
• /
• 제15권3호
• /
• pp.83-97
• /
• 2011

The purpose of this study was to investigate stereotypes, affect and social distance toward people from Southeast Asia among visiting supervisors for multicultural families and to explore the factors that influence social distance. The subjects were 243 visiting supervisors for multicultural families. The data were analyzed with SPSS for Windows 15.0 through means, standard deviations, Cronbach's a, Scheff$\acute{e}$ tests, Pearson's correlation, and stepwise regression. It was found that stereotypes and affect among visiting supervisors toward people from Southeast Asia were somewhat positive, at a little higher than midpoint. Social distance, on the other hand, was found to be a little lower than midpoint. To discover the factors that influenced social distance, a stepwise regression was executed. Stereotype was the factor with the highest magnitude of effect and affect was the second- strongest factor in explaining the social distance found among visiting supervisors. Age was the third significant factor in explaining social distance. These variables accounted for 35.7% of variance in the social distance data.

• Advances in concrete construction
• /
• 제8권4호
• /
• pp.277-283
• /
• 2019

In evaluating explosion-protection capacity, safety distance is broadly accepted as the distance at which detonation of a given explosive causes acceptable structural damage. Safety distance can be calculated based on structural response under blast loading and damage criteria. For the applicability of the safety distance, the minimum required stand-off distance should be given when the explosive size is assumed. However, because of the nature of structures, structural details and material characteristics differ, which requires sensitivity analysis of the safety distance. This study examines the safety-distance sensitivity from structural and material property variations. For the safety-distance calculation, a blast analysis module based on the Kingery and Bulmash formula, a structural response module based on a Single Degree of Freedom model, and damage criteria based on a support rotation angle were prepared. Sensitivity analysis was conducted for the Reinforced Concrete one-way slab with different thicknesses, reinforcement ratios, reinforcement yield strengths, and concrete compressive strengths. It was shown that slab thickness has the most significant influence on both inertial force and flexure resistance, but the compressive strength of the concrete is not relevant.

• 유통과학연구
• /
• 제14권7호
• /
• pp.63-70
• /
• 2016

Purpose - The purpose of this study was to examine the variations in emotions during vacation and to explore if such variations depend on psychological distance perceived by vacationers. We proposed that there are changes in affect balance during the course of vacation as well as the mental construal of psychological distance. Research Design, Data, and Methodology - Repeated measures ANOVA was used to examine the variation in emotion and psychological distance of 66 holiday makers who were traveling to different destination for vacation. Data were collected in 2 months with the help of a travel agency. Results - We find that there are variations in emotions during the vacation at different points in time as well as perceived psychological distance. Also we find some evidence that suggests emotional happiness does depend on perceived mental distance to some extent. Conclusion - Our study replicates the findings of previous studies in a novel way and illustrates the robustness of the nature of emotions during vacation and indicates certain time points where the happiness of vacationers can be enhanced. Perceived psychological distance do have an effect on how happy an individual feels during the vacation.

• 한국산학기술학회논문지
• /
• 제6권3호
• /
• pp.249-254
• /
• 2005

본 논문은 얼굴인식에서 사용되고 있는 PCA/LDA 방식의 유사도 측정 방식에 따른 인식 성능을 비교 분석하였다. 총 14가지의 거리 척도를 ORL 얼굴 데이터베이스에 적용하였으며, PCA와 PCA/LDA로 나누어 성능 비교를 하였다. PCA의 경우에는 맨하튼 거리, Weighted SSE 거리의 인식률이 좋지만, PCA/LDA인 경우에는 Angle-based 거리, Modified SSE거리에 대한 인식률이 좋음이 확인되었다. 또한 PCA보다 PCA/LDA의 경우 유사도 비교 차원의 수를 줄이면서 높은 인식률을 유지할 수 있어, PCA/LDA와 Angle-based 거리 척도를 적용하여 얼굴인식을 할 경우 계산의 경제성과 인식률에서 높은 경쟁력을 갖출 수 있다.

• 한국정밀공학회지
• /
• 제17권7호
• /
• pp.132-140
• /
• 2000

Plasma arc cutting is one of the most widely used processes in metal cutting fields and is a process that produces parted metal plates by cutting them with an arc plasma established between the electrode tip and the plate(workpiece). When the tip-to-workpiece distance varies during cutting, the cut quality, for example the kerf width, is deteriorated by the change of plasma arc. The variations of tip-to-workpiece distance are due to the different factors such as inaccuracies in setting the torch or workpiece, thermal distortions during cutting, and uneven surface of workpiece. The control to keep the tip-to-workpiece distance constant is thus indispensable to improve the flexibility of automatic plasma arc cutting system applications. In this study, an arc sensor which utilizes the electrical signal obtained from the plasma arc itself was developed. The arc sensor has an advantage that no particular sensing device is necessary and real-time sensing of the tip-to-workpiece distance is possible directly under the plasma arc. The relationship between plasma arc voltage and tip-to-workpiece distance was determined through the repeated experimental results. The model was used for developing an automatic tip-to-workpiece distance control system of plasma arc cutting. It could be shown that the proposed system has a successful capability of tip-to-workpiece distance control.