• Title/Summary/Keyword: dissolved silica

Search Result 70, Processing Time 0.025 seconds

A Study on the Ion Exchange and th Chemical Stability of Na-fluor-tetrasilicic Mica by $H^+$ions (나트륨형불소 4 규소운모의 $H^+$ 이온교환 및 화학적인 안정성에 관한 연구)

  • 송종택
    • Journal of the Korean Ceramic Society
    • /
    • v.22 no.1
    • /
    • pp.35-39
    • /
    • 1985
  • Synthetic mica $NaMg_{2.5}(Si_4O_{10})F_2 (Na-TSM)$ was treated with HCl solution and H-type exchange resin to investigate the chemical stability and the ion exchange by measuring the dissolution of chemical components and the exchanged $H^+$ ion. The replacement of $Na^+$ ion occurred in contact with HCl solution and H-type ion exchange resin at the surface of Na-TSM particles reached $Na^+$ ions at maximum value of 70~80%. $Mg^{2+}$ ion of octahedral layer became to dissolve from the pH2 solution and th amount of it dissolved in-creased almost proportional to $H^+$ ion concentration from around 0.02N $H^+$ ion equilibrium concentration. The crystalline structure of Na-TSM was destructed by dissolution of Mg2+ ion in cncentrated hydrochloric acid solution and resulted silica gel precipitation.

  • PDF

Diffusion of Ion in Hardened Cement Paste Containing Slag-Siliceous Powder(II) Diffusion of SO4-- Ion (슬래그-규산질 미분말을 함유하는 시멘트 경화체중에서의 이온의 확산(II) SO4 이온의 확산)

  • 김태현;최상흘;한기성
    • Journal of the Korean Ceramic Society
    • /
    • v.24 no.4
    • /
    • pp.329-334
    • /
    • 1987
  • Diffusion of SO4-- ion in hardened cement paste with slag and siliceous powders such as silica fume and white carbon was investigated. Ca(OH)2 from hardenend cement paste was dissolved by sea-water and then gypsum was formed from the reaction of Ca++ in hardenend cement paste and SO4-- ions in MgSO4 solution. A part of the gypsum by reaction with calcium aluminate hydrates formed ettringite. Amounts of SO4-- ions passed through hardened cement paste was less than that of Cl- ions(Dcl-) in hardened cement paste were 0.1∼0.6${\times}$10-11$\textrm{cm}^2$/sec and 1∼4${\times}$10-8$\textrm{cm}^2$/sec respectively.

  • PDF

Studies on the Constituents of Korean Edible Oils and Fats - Part 6 : A Study on the Natural Antioxidants of sesame and perilla seeds - (한국산 식물식용유지의 성분에 관한 연구 - 제 6 보 : 참깨와 들깨종자유 중의 천연산화방지제에 관한 연구 -)

  • Hwang, Sung-Za;Ko, Young-Soo
    • Journal of Nutrition and Health
    • /
    • v.15 no.1
    • /
    • pp.30-38
    • /
    • 1982
  • Experiments were carried out in order to compare the natural antioxidants in the acetonitril extracts of raw and baked seeds of Korean sesame and perilla by thin layer and gas chromatography. The sample was dissolved in n-pentane and extracted with acetonitril and the acetonitril extract was separated by thin layer chromatography using silica gel. The spots were detected by spraying with 2, 6 -dichloroquinone -4-chlorimide, phosphomolybdic acid and dimethylamine as chromogenic reagents. Natural antioxidant, such as ${\delta}-tocopherol$ detected in raw and baked sesame and perilla seed oil by TLC and sesamol was detected only in raw and baked sesame seed oil by GC.

  • PDF

Calibration and Verification of a Tidal Prism Eutrophication Model for the Lynnhaven Bay (U.S.A)

  • PARK Kyeong;KUO Albert Y.
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.30 no.6
    • /
    • pp.964-973
    • /
    • 1997
  • A tidal prism eutrophication model, an one-dimensional intertidal model, is developed to study water quality conditions at small coastal basins and tidal creeks. The model simulates the physical transport processes using the concept of tidal flushing. The concept is simple and straightforward, and thus is ideal for small coastal basins with complex geometry. The model, having twenty-four state variables in the water column, simulates salinity, temperature, dissolved oxygen, three algal groups, and the cycles of carbon, nitrogen, phosphorus and silica. The model is applied to the Lynnhaven Bay, a small coastal basin of Chesapeake Bay in U.S.A. The model is calibrated using the field data collected in 1994, and then is verified using the independently collected data in 1980. The model overall gives a good reproduction of the field data, partly owing to the data collected from the field surveys specifically designed for the model application. This paper presents the procedure, and the results of the model calibration and verification.

  • PDF

Crystal Form of Cephradine

  • Sohn, Young-Taek;Park, Sun-Hee
    • Archives of Pharmacal Research
    • /
    • v.29 no.2
    • /
    • pp.178-182
    • /
    • 2006
  • Four crystal forms of cephradine were isolated by recrystallization and characterized by powder X-ray diffractometry, differential scanning calorimetry, and thermogravimetric analysis. The dissolution patterns of four crystal forms of cephradine were studied in water at $37{\pm}0.5^{\circ}C$, 90 rpm for 120 min. The amount dissolved at 120 min was highest for Form 1 ($100\%$), followed by Form 3 ($98.9\%$), Form 4 ($77.83\%$), and Form 2 ($75.55\%$). After storage for two months at $0\%$ RH (silica gel, $20^{\circ}C$), $52\%$ RH (saturated solution of $Na_{2}Cr_{2}O_{7}{\cdot}2H_{2}O/20^{\circ}C$), and $95\%$ RH (saturated solution of $Na_{2}HPO_{4}/20^{\circ}C$), none of the crystal forms showed transformation.

Determination of volatile and residual iodine during the dissolution of spent nuclear fuel (사용 후 핵연료 용해 중 휘발 및 잔류 요오드 분석)

  • Kim, Jung Suk;Park, Soon Dal;Jeon, Young Shin;Ha, Young Keong;Song, Kyuseok
    • Analytical Science and Technology
    • /
    • v.22 no.5
    • /
    • pp.395-406
    • /
    • 2009
  • The determination of iodine in the spent nuclear fuel and the volatile behavior during its acid dissolution have been studied by NAA(neutron activation analysis) and electron probe microanalysis (EPMA). Simulated spent fuels (SIMFUELs) were dissolved in $HNO_3$(1+1) at $90^{\circ}C$ for 8 hours. The iodine remained in a dissolver solution after dissolution, and that condensed in dissolution apparatus and trapped in the adsorbent by volatilization during the dissolution were determined, respectively. The condensed iodine was recovered by the redistillation with $HNO_3$(1+1) after transfer of the dissolver solution. The iodines in the dissolver and redistilled solution were separated by solvent extraction followed by ion exchange or precipitation method and determined by RNAA (radiochemical neutron activation analysis). The ion exchange column and filtration kit used for the isolation of iodine, which were prepared with a polyethylene tube, were used as an insert in the pneumatic tube for neutron irradiation. The iodine volatilized during the dissolution of SIMFUELs was collected in a trapping tube containing Ag-silica gel (Ag-impregnated silica gel) adsorbent, and the distribution of iodine trapped in the adsorbents were determined by EPMA. The adsorbing characteristics shown with the SIMFUELs were compared with those shown with a real spent fuel from the nuclear power plant.

A Fundamental Study on the Potential of Alkali-Aggregate Reaction according to KS F 2545 and ASTM C 1260 Test Methods (KS F 2545와 ASTM C 1260 시험법에 따른 알칼리골재 잠재가능성에 관한 연구)

  • Baek, Chul-Seoung;Seo, Jun-Hyung;Kim, Young-Jin;Cho, Kye-Hong;Kim, Kun-Ki;Lee, Jin-Young
    • Resources Recycling
    • /
    • v.29 no.2
    • /
    • pp.18-27
    • /
    • 2020
  • Chemical experiment KS F 2545 and Physical experiment ASTM C 1260 has been accomplished to estimate the potential of alkali aggregate. Used for testing aggregate samples are forest aggregate and recycled aggregate which collected in Gangwon province Samcheok and Pyeongchang, Jeollabuk province Gimje and Kochang, and Gyeongsangnam province Goryeong. As the results of chemical experiment confirmed that if silicate rock and carbonate rock are mixed, reduction in alkalinity is increase. So it has been identified that case makes a disturb at the result of alkali aggregate reaction. In 9 out of the 62 aggregate samples check dissolved silica exceeding 100 mmol/ℓ. and mortar bar length increase rate confirmed that 5 of 9 chemical method aggregates were 0.1~0.2% and 2 aggregates were 0.2%. As a result of the alkaline aggregate reaction test using the chemical method and the mortar bar method, the aggregates showing alkali aggregate reaction are sandstone and tuff aggregates. Therefore, Alkali aggregate reaction tests are required to use clastic sedimentary rocks and volcanic pyroclastic rocks aggregates.

Fabrication of Optically Active Nanostructures for Nanoimprinting

  • Jang, Suk-Jin;Cho, Eun-Byurl;Park, Ji-Yun;Yeo, Jong-Souk
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.393-393
    • /
    • 2012
  • Optically active nanostructures such as subwavelength moth-eye antireflective structures or surface enhanced Raman spectroscopy (SERS) active structures have been demonstrated to provide the effective suppression of unwanted reflections as in subwavelength structure (SWS) or effective enhancement of selective signals as in SERS. While various nanopatterning techniques such as photolithography, electron-beam lithography, wafer level nanoimprinting lithography, and interference lithography can be employed to fabricate these nanostructures, roll-to-roll (R2R) nanoimprinting is gaining interests due to its low cost, continuous, and scalable process. R2R nanoimprinting requires a master to produce a stamp that can be wrapped around a quartz roller for repeated nanoimprinting process. Among many possibilities, two different types of mask can be employed to fabricate optically active nanostructures. One is self-assembled Au nanoparticles on Si substrate by depositing Au film with sputtering followed by annealing process. The other is monolayer silica particles dissolved in ethanol spread on the wafer by spin-coating method. The process is optimized by considering the density of Au and silica nano particles, depth and shape of the patterns. The depth of the pattern can be controlled with dry etch process using reactive ion etching (RIE) with the mixture of SF6 and CHF3. The resultant nanostructures are characterized for their reflectance using UV-Vis-NIR spectrophotometer (Agilent technology, Cary 5000) and for surface morphology using scanning electron microscope (SEM, JEOL JSM-7100F). Once optimized, these optically active nanostructures can be used to replicate with roll-to-roll process or soft lithography for various applications including displays, solar cells, and biosensors.

  • PDF

Purification of Antifungal Antibiotic NH-B1 from Actinomycete NH 50 Antagonistic to Plant Pathogenic Fungi (식물병원진균에 길항효과가 있는 방선균 균주 NH50에서 항진균성 항생물질 NH-B1의 순수 분리)

  • 김현겸;김범석;문석식;황병국
    • Korean Journal Plant Pathology
    • /
    • v.14 no.3
    • /
    • pp.191-202
    • /
    • 1998
  • About 300 actinomycetes were isolated from two forest and one sea-shore soil and tested for inhibitory effects on mycelial growth of six plant pathogenic fungi Magnaporthe grisea, Alternaria mali, Colletotrichum gloeosporioides, Phytophthora capsici, Fusarium oxysporum f. sp. cucumerinum, and Rhizoctonia solani. Among 300 actinomycetes tested, only 16 actinomycetes showed the antifungal activity against the test fungi. Isolate NH 50 was selected for production and purification of antifungal antibiotic substances. Actinomycete isolate NH 50 displayed the broad antifungal spectra against 11 plant pathogenic fungi. To identify actinomycete isolate NH 50, cultural characteristics on various agar media, diaminopimelic acid type, and morphological characteristics by scanning electron microscopy were examined. As a result, actinomycete isolate NH 50 was classified as a rare actinomycete that had LL-DAP type and did not produce spores. After incubation of isolate NH 50 in yeast extract-malt extract-dextrose broth, antifungal compound NH-B1 that inhibited mycelial growth of some plant pathogenic fungi was purified from the methanol eluates of XAD-16 resins by a series of purification procedures, i.e., silica gel flash chromatography, C18 flash chromatography, Sephadex LH-20 column chromatography, silica gel medium pressure liquid chromatography (MPLC), C18 MPLC, and high pressure liquid chromatography (HPLC). UV spectrum and 1HNMR spectrum of antifungal compound NH-B1 dissolved in methanol were examined. The antibiotic NH-B1 showed the major peaks at 230 and 271.2nm. Based on the data of 1H-NMR spectrum, NH-B1 was confirmed to be an extremely complex polymer of sugars called polysaccharides. The antibiotic NH-B1 showed strong antifungal activity against Alternaria solani and Cercospora kikuchi, but weak activity against M. grisea.

  • PDF

Solumycin : A water-soluble antifungal antibiotic from Streptomyces sp. LAM-593 (Streptomyces sp. LAM-593이 생산하는 수용성 항진균성 항생물질)

  • Yi, Dong-Heui;Park, Seung-Lim;Kwon, Tae-Jong;Chung, Ho-Kwon
    • Applied Biological Chemistry
    • /
    • v.34 no.2
    • /
    • pp.180-186
    • /
    • 1991
  • A water soluble antifungal antibiotic, Solumycin, was separated from the culture broth of Streptomyces sp. LAM-593, isolated from soil, by butanol extraction, alumina-, 1st and 2nd Sephadex LH-20 column chromatography. The substance was pale yellow crystal which gave a single spot at Rf value 0.24 with ethanol-ammonia water-water (8:1:1), 0.46 with butanol-ethanol-water (5:1:4), 0.84 with 50% methanol on silica gel TLC. It was dissolved well in water, methanol and acidic aq. butanol but not in ethanol, acetone, ethyl acetate, chloroform. acetic acid etc., and gave positive Fehling and Molish reaction. The UV spectrum in methanol showed absorption at 342, 361, 380, and 404 nm. The antibiotic was active against fungi such as Candide, Cryptococcus, Saccharomyces, Trichophyton and Trichosporon, but not to bacteria such as Bacillus, Escherichia and Staphylococcus.

  • PDF