• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.7-14
• /
• 2003

본 연구의 목적은 계측변위를 이용한 흙막이 벽체의 역해석시 예기치 못한 하중으로 인해 발생한 이상변위의 누적에 의한 오차를 최소화할 수 있는 기법을 개발하는 것이다. 이를 위해 단계별 변위증분으로 목적함수를 구성하고, 목적함수를 최소화시키는 최적화기법으로 직접탐색법중 유용방향법에 의한 순차선형계획법을 도입하여 역해석 프로그램을 개발하였다. 또한, 모형토조실험을 실시하여 측정된 실제변위와 예측변위를 비교$.$분석함으로써 개발된 역해석 프로그램의 신뢰성을 검증하였다.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.481-490
• /
• 2002

본 논문의 목적은 공간 트러스 비선형 해석기법에 대한 수치해석적 장단점을 비교하고, 효율적인 해석기법을 제안하는 것이다. 사용된 해석기법은 하중 제어법으로 뉴턴-랩슨법, 수정 뉴턴-랩슨법, 할선-뉴턴법, 하중-변위 제어법으로 호장법, 증분일 제어법, 그리고 본 논문에서 제안한 하중-변위의 복합적 제어법으로 복합 호장법 Ⅰ, 복합 호장법Ⅱ, 복합 증분일 제어법이 있다. 공간 트러스에 대한 해석기법의 효율성 평가를 위하여 해의 정확성, 수렴성, 계산시간 등을 제시된 예에 비교한 결과 본 논문에서 제안한 하중-변위의 복합적 제어법의 신뢰성을 입증하였으며, 기하학적 비선형 해석 및 좌굴후 거동의 추적에 있어서 효율적이었다. 특히, 자유도수가 많은 공간 트러스의 좌굴하중 추척에 있어서는 복합 증분일 제어법이 효율적이었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.21-26
• /
• 2003

지금까지의 탄성설계 개념에서 진전하여 소성을 고려한 탄소성 설계 개념의 설계적용이 필요하다 본 연구에서는 선체의 대표적인 구조물인 판을 대상으로 일반적인 하중형증분법 및 변위형증분법과 같은 비선형해석 기법과 호장증분법과 Newton-Raphson법을 병용한 증분형해법을 비교하였다. 특히. 초기처짐의 형태에 따른 해석을 통하여 초지처짐의 형상에 따른 판의 탄소성거동을 규명하였다 압축하중을 받는 박판구조물은 초기좌굴후 거동과 2차좌굴후 거동이 구조물 전체에 미치는 영향이 매우 크며 이러한 복잡한 거동을 구하기 위해서 해석방법으로는 범용 유한요소해석 프로그램인 ANSYS를 이용하였고 특히 호장증분법은 좌굴점에서의 복잡한 비선형 거동을 추정하기 위하여 적용하였다.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.631-641
• /
• 1988

본 연구에서는 선형 탄성 해석의 결과를 이용하여 초기 하중 증분량을 결정하 는 방법을 제안한다. 또 Crisfield의 방법에서 부분적으로 발생하는 수치적 불안정 을 개선하고 수치 해석의 효율을 제고시키기 위하여 하중 증감의 판정 방법과 변위 증 분 길이의 예측 방법을 제안한다.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2223-2233
• /
• 1993

An engineering method is suggested to calculate the applied load versus crack extension in the elastic-plastic fracture. The condition for an increment of crack extension is set by a critical increment of crack-up opening displacement(CTOD). The ratio of the CTOD increment to the incremental crack extention is a critical crack-tip opening angle(CTOA), assumed to be constant for a material of a given thickness. The Dugdale model of crack-tip deformation in an infinite plate is applied to the method, and a complete solution for crack extension and crack instability is obtained. For finite-size specimens of arbitrary geometry in general yielding, an approximate generalization of the Dugdale model is suggested so that the approximation approaches the small-scale yielding solution in a low applied load and the finite-element solution in a large applied load. Maximum load is calculated so that an applied load attains either a limit load on an unbroken ligament or a peak load during crack extension. The proposed method was applied to three-point bend specimens of a carbon steel SM45C in various sizes. Reasonable agreements are found between calculated maximum loads and experimental failure loads. Therefore, the method can be a viable alternative to the J-R curve approach in the elastic-plastic fracture analysis.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1658-1667
• /
• 1993

In this research, a numerical algorithm has been developed, which can be applied to the large deformation and large displacement contact problems between two deformable bodies. The contact conditions expressed in terms of the rate of angle change have been proposed considering the change in geometric shape and rate of contact force. A set of linear simultaneous equations is constructed by adding the geometric shape change and contact conditions to the original stiffness matrix. A new method to determine time increment has been proposed based on Euler method, in which the condition to prevent the contact bodies from penetrating and overrunning each other has been taken into consideration. Practical application to contact problem is extrusion in which bodies are sliding along the contact boundary.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.61-65
• /
• 2008

This study, having combined and displaced blast furnace slag("BS" hereinafter) known as admixture material that delays hydration reaction with coarse particle cement("CC" hereinafter) collected in particle classification method during ordinary portland cement("OPC" hereinafter), reviewed the hydration heat characteristics affecting the concrete. To reduce hydration heat, the study plain-mixed which used 100% OPC for W/B 50% level 1, displaced CC at level 3 of 25%, 50% and 75% for OPC, and by displacing BS with admixture material at level 5 of 0%, 20%, 40%, 60% and 80% for cement(OPC+CC), experimented totally 16 batches. As a result of experiment, in the case of flow, the more CC displacement rate increased, the more it tended to decrease, and the more BS displacement rate increased, the more it decreased. Also, as for simple adiabatic temperature rise by the CC and BS displacement rates, it decreased as displacement rate increased, and particularly in the case of displaced BS of 80%, It showed temperature reduction effect of about 63% companing with plain. Compressive strength decreased in proportion to displacement rate, however strength reduction increment was shown to decrease with age progress.

• 한국농공학회지
• /
• 제36권1호
• /
• pp.83-94
• /
• 1994

The first part of this study dealt with the determination of soil parameters for Lade's double work-hardening model using the raw data obtained from cubical and cylinderal triaxial tests At present, it should be investigated which test can simulated satisfactorily the behavior of soft clayey foundation. In this regard, plate bearing test on the 2-dimentional model foundation(218cm long, 40cm wide, 19&m high) was performed, and finite element analysis carried out to abtain the behavior of the foundation. Settlement, lateral displacement, displacement vector and mode of failure were measured and these values were compared with numerical values in order to validate the numerical program developed by authors. The FEM technique was based on Christain-Boehmer's method, in which the displacement is obtained at each nodal point while stress and pore water pressure at each element.In this research, Biot's equation, which explains was elahorately the phisical meaning of consolidation, was selected, as a governing equation, coupled with Lade's double surface work-hardening constitutive model.

• 대한조선학회지
• /
• 제13권4호
• /
• pp.11-18
• /
• 1976

In 1925 Havelock compared theoretical wave resistance with experimental one varying draft, in which the two ship's forms were different from each other. So, in this paper theoretical wave resistance was compared with the experimental one on the ship of the same form. And, though Havelock calculated theoretical wave resistance by mathematical artifice, in this paper it was calculated by computer using the method of numerical integration. In Havelock's paper, the increment of wave resistance decreased when the draft increased. but in this paper the conclusion is changed: the increment of wave resistance increases when the draft increases. The reason is supposed by the effect of the displacement of the ship.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.457-464
• /
• 1998

The equilibrium path of shallow sinusoidal arches supported by hinges at both ends is investigated. The displacement increment method is used to get the solution of the nonlinear differential equations for these structures and to plot the equilibrium paths by the results. Using the equilibrium paths, the relations between the position of buckling point and buckling type for the case of sinusoidal distributed loads are inferred. From the result that the buckling type changes according to the normalized rise of arch, it is also shown that the arch rise is the governing factor to stability regions