• Composites Research
• /
• 제30권6호
• /
• pp.399-405
• /
• 2017

ILC 기술을 이용하여 장섬유강화 플라스틱 자동차 언더커버 시제품을 제작하고, 시제품의 성형성, 기계적성질 및 내구성을 평가하였다. 언더커버에 대한 사출성형해석과 경량화를 고려하여 시제품을 위한 사출금형을 제작하였다. 보강섬유의 잔존길이 및 분포도를 평가하여 시제품의 성형성을 검토하였고 굴곡강성 및 강도, 충격강도 등의 기계적 성질도 조사하였다. 자동차 내장부품 내구수명 평가 방법인 KLT(Key Life Test)법으로 내구성을 평가하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.418-429
• /
• 2011

Researches using time reversal acoustics (TRA) for impact localization have been paid attention to recently. Dispersion characteristics of Lamb waves, which restrict the utility of classical nondestructive evaluation based on time-of-flight information, can be compensated through the application of TRA to Lamb waves on a plate. This study investigates the spatial focusing performance of time reversal Lamb waves on a plate using finite element analysis. In particular, the virtual sensor effect caused by multiple wave reflections at the boundaries of the plate is shown to enable the spatial focusing of Lamb waves though a very small number of surface-bonded piezoelectric (PZT) sensors are available. The time window size of forward response signals, are normalized with respect to the number of virtual active sensors. Then their effects on the spatial focusing performance of Lamb waves are investigated.

• 한국분말재료학회지
• /
• 제23권4호
• /
• pp.276-281
• /
• 2016

Carbonyl iron (CI) is successfully incorporated as an additive into a polystyrene (PS) matrix via a highenergy ball milling method, under an n-hexane medium with volume fractions between 1% and 5% for electromagnetic interference shielding applications by the combination of magnetic CI and an insulating PS matrix. The morphology and the dispersion of CI are investigated by field emission scanning electron microscopy, which indicates a uniform distribution of CI in the PS matrix after 2 h of milling. The thermal behavior results indicate no significant degradation of the PS when there is a slight increase in the onset temperature with the addition of CI powder, when compared to the as-received PS pellet. After milling, there are no interactions between the CI and the PS matrix, as confirmed by Fourier transformed infrared spectroscopy. In this study, the milled CI-PS powder is extruded to make filaments, and can have potential applications in the 3-D printing industry.

• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.107-112
• /
• 2010

Carbon-nanotube-embedded bismuth telluride (CNT/$Bi_2Te_3$) matrix composites were fabricated by a powder metallurgy process. Composite powders, whereby 5 vol.% of functionalized CNTs were homogeneously mixed with $Bi_2Te_3$ alloying powders, were successfully synthesized by using high-energy ball milling process. The powders were consolidated into bulk CNT/$Bi_2Te_3$ composites by spark plasma sintering process at $350^{\circ}C$ for 10 min. The fabricated composites showed the uniform mixing and homogeneous dispersion of CNTs in the $Bi_2Te_3$ matrix. Seebeck coefficient of CNT/$Bi_2Te_3$ composites reveals that the composite has n-type semiconducting characteristics with values ranging $-55\;{\mu}V/K$ to $-95\;{\mu}V/K$ with increasing temperature. Furthermore, the significant reduction in thermal conductivity has been clearly observed in the composites. The results showed that CNT addition to thermoelectric materials could be useful method to obtain high thermoelectric performance.

• 한국분말재료학회지
• /
• 제14권5호
• /
• pp.292-297
• /
• 2007

The present study was focused on the synthesis of a $TiB_2$ dispersed copper matrix composite material by the combination of the mechanical milling and plasma activated sintering processes. The $Cu/TiB_2$ mixed powder was prepared by the combination of the mechanical milling and reduction processes using the copper oxide and titanium diboride powder as the raw material. The synthesized $Cu/TiB_2$ mixed powder was sintered by the plasma activated sintering process. The hardness and electric conductivity of the sintered bodies were measured using micro vickers hardness and four probe method, respectively. The relative density of $Cu/TiB_2$ composite material sintered at $800^{\circ}C$ showed about 98% of theoretical density. The $Cu-1vol%TiB_2$ composite material has a hardness of about 130Hv and an electric conductivity of about 85% IACS. The hardness and electric conductivity of $Cu-3vol%TiB_2$ composite material were about 140 Hv and about 45% IACS, respectively.

• 한국주조공학회지
• /
• 제13권6호
• /
• pp.547-554
• /
• 1993

Aluminum alloy matrix composites reinforced with various amounts of $Al_2O_3$ short fibers have been produced by rheo-compocasting accompanied by hot pressing. When composites reinforced with fibers are produced by rheo-compocasting, S-L process is the most effective method for homogeneous dispersion of fibers. A sound composites with the improved orientation(3 dimension${\rightarrow}$2 dimension) of the fibers and increased volume fraction of them have been fabricated through the hot pressing of the casted composites. Fibers are broken down when rheo-compocasting, hot pressing, and $T_6$ treating. Among them fibers are broken down most heavily in the hot pressing. And even in the case of the composite reinforced with 30 vol% fibers, which showed the hardest fiber break down, aspect ratio(11.6) is higher than critical aspect ratio(10.7). The fiber strengthening effect in the composites has showed upto 573K. As the test temperature increases to the range of 573K, the effect has been higher. The fracture of composites is controlled by fiber from room temperature to 473K, but the fracture of composites is controlled by interface between fiber and matrix alloy above 473K.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.476-482
• /
• 2009

The crystallization behavior of poly(vinyl alcohol) (PVA) in the presence and absence of polypyrrole nanoparticles (PPy NPs) was investigated in terms of the heterogeneous nucleation effect of PPy NPs using FTIR, X-ray diffraction, differential scanning calorimeter and polarized optical microscope analysis. PPy NPs were prepared by dispersion polymerization method stabilized by PVA in aqueous solution. A polymer nanocomposite with uniform dispersity could be readily obtained due to the enhanced compatibility between the filler and matrix. Compared with the PPy NP-absent PVA, the PPy NP/PVA nanocomposite exhibited an enhanced degree of crystallinity. The degree of crystallinity increased up to 17% at the PPy NP concentration of 1 wt%, compared to the pristine PVA. The PPy NP acted as an effective nucleating agent during the crystallization process, thereby enhancing the degree and rate of crystallization. The kinetics study of the crystallization also revealed the decreased value of the Avrami coefficient in the case of the PPy NP/PVA nanocomposite.

• 디지털융복합연구
• /
• 제10권4호
• /
• pp.347-352
• /
• 2012

자연의 불확정적인 물리현상은, 감성적인 공학기술 영역뿐 아니라 및 예술의 시각표현 방법으로도 자주 연구되는 영역이다. 본 논문에서는 모더니즘 회화에서 물질의 특성을 강조한 회화작품에서 보여 지는 자연의 물리적인 현상들(스며듦, 번짐, 흐름)을 분석한 연구[1]를 Unity3D 엔진의 파티클 시스템을 이용하여 구현 가능성을 제안한다. 그리하여 그래픽스 프로그래밍 습득에 어려운 아티스트들이 수월하게 Unity3D 엔진을 이용하여 자연의 불확정적 비주얼표현 구현에 도움을 줄 수 있으며 또한 감성기반 테크놀로지를 연구하는 공학자들에게도 아이디어 제공에 도움을 줄 수 있을 것이다.

• 한국광학회지
• /
• 제6권4호
• /
• pp.324-330
• /
• 1995

단일모드광섬유에서의 유도브릴루앙산란을 설명하고 광원에 의한 기준신호 및 광섬유에서의 유도브릴루앙산란 신호를 이용해 헤테로다인 방식으로 주파수변화를 조사하였다. 수개의 종모드를 갖는 광원과 고리형 광섬유공진기를 결합하여 간단하게 스팩트럼분석기로 광섬유에서의 브릴루앙산란을 관측할 수 있다. 이 방법은 기준맥놀이 신호를 사용하기 때문에 13GHz 영역에서의 주파수변화를 수 GHz의 낮은 영역에서의 주파수변화로 브릴루앙산란 신호를 볼 수 있다. 분산천이광섬유와 크래딩에 Ti 도핑된 광섬유및 일반단일모드광섬유를 적절히 선택하여 13GHz 영역에서의 주파수변화를 수 GHz 이하의 영역에서 주파수변화로 조사하니 각각 3.32GHz, 900MHz 및 870MHz였다.

• 한국재료학회지
• /
• 제8권12호
• /
• pp.1133-1137
• /
• 1998

MCFC(Molten Carbonate Fuel Cell) 작동온도인 $650^{\circ}C$에서 Ni 음극의 Creep 및 소결에 대한 저항성을 개선시키고자 Ni-W(WC) 복합재료를 기계적 합금법으로 제조하였다. 기계적 합금화한 분말의 XRD분석결과 밀링시간이 증가함에 따라 재료의 규칙적인 결정이 파괴되어 비정질화 되어가는 경향을 보였다. 소결은 $1280^{\circ}C$의 수소분위기에서 10시간 행하였다 소결된 시편의 dot-mapping 및 TEM 분석결과 Ni-W 계면에서의 2차상 관찰되지 않았으나 $0.1\mu\textrm{m}$ 이하의 W이 Ni 기지내에 미세하고 균일하게 분포되어 있는 것으로 나타났다. 이와같이 미세하고 균일하게 분포되어 있는 W은 고용강화 및 분산강화 효과를 통하여 Ni음극의 기계적 특성을 향상시킬 것으로 기대된다.