• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.201-204
• /
• 1999

Polarization mode dispersion (PMD) restrict the bend-width of single mode optical filer, and it is important parameter in the optical fiber having long-length. Although fiber has perfect circular symmetry, fiber bending, twisting and laws governing manufacture cause additional Polarization mode dispersion. The effect of polarization mode dispersion in general single mode fiber of long length is discussed in this paper. Measurement of PMD with random mode coupling were conducted in two kind of fibers using different laws governing manufacture and interferometric method.

• Journal of Information Technology Applications and Management
• /
• v.21 no.4_spc
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• Journal of the Korean Statistical Society
• /
• v.28 no.2
• /
• pp.225-234
• /
• 1999

We consider the following semi-parametric non-linear mixed effect regression model : y\ulcorner=f($\chi$\ulcorner;$\beta$)+$\sigma$$\mu$($\chi$\ulcorner)+$\sigma$$\varepsilon$\ulcorner,i=1,…,n,y*=f($\chi$;$\beta$)+$\sigma$$\mu$($\chi$) where y'=(y\ulcorner,…,y\ulcorner) is a vector of n observations, y* is an unobserved new random variable of interest, f($\chi$;$\beta$) represents fixed effect of known functional form containing unknown parameter vector $\beta$\ulcorner=($\beta$$_1$,…,$\beta$\ulcorner), $\mu$($\chi$) is a random function of mean zero and the known covariance function r(.,.), $\varepsilon$'=($\varepsilon$$_1$,…,$\varepsilon$\ulcorner) is the set of uncorrelated measurement errors with zero mean and unit variance and $\sigma$ is an unknown dispersion(scale) parameter. On the basis of finite-sample, small-dispersion asymptotic framework, we derive an absolute lower bound for the asymptotic mean squared errors of prediction(AMSEP) of the regular-consistent non-linear predictors of the new random variable of interest y*. Then we construct an optimal predictor of y* which attains the lower bound irrespective of types of distributions of random effect $\mu$(.) and measurement errors $\varepsilon$.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.84-89
• /
• 2021

The alternative method for symmetric configuration in optical link consisted of dispersion management and optical phase conjugation for compensating of the distorted optical signals due to chromatic dispersion and nonlinear effects of standard single mode fiber is proposed. The symmetric configuration means number of fiber spans, dispersion distribution in former half section and latter half section, etc should be symmetrical about optical phase conjugator. In dispersion-managed proposed in this research, optical phase conjugator is located after former half section consisted of 6 fiber spans and before latter half section of 14 fiber spans, and the averaged residual dispersion per span (RDPS) of each half section are consistence. The compensation effects of the distorted signals in the proposed link is analyzed by comparing with the results obtained in dispersion-managed link with the unequally averaged RDPS of each half section. From the simulation results, it is confirmed that RDPS deviation between adjacent fiber span has a grater effect on the compensation than the equivalent of the averaged RDPS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.898-906
• /
• 2002

In this paper, we investigated the improvement degree of transmission distance of the various initial frequency chirped optical pulse with 5 dBm initial power dependence on the various bit rate and fiber dispersion coefficient, when MSSI(Mid-Span Spectral Inversion) with the optimal pump power condition is adopted for the compensation method for optical pulse distortion. And we analyzed the influence of mutual relation of optical pulse frequency chirp and Kerr effect on the MSSI methods for the long-haul optical transmission through the computer simulation. We found that the compensation degree of distorted optical pulse varies as a consequence of the variation of combined phase modulation of self phase modulation(Kerr effect) and initial frequency chirp parameter dependence on the fiber dispersion coefficient. And we found that, if the transmission bit rate is increased k times, the dispersion coefficient value of dispersion shift fiber is decreased $2^k$ times so as to be almost the same performance of the transmission system with k times lower bit rate.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.54-62
• /
• 2006

Kelvin equation is revisited, which accounts for important phenomena observed frequently in nano-dispersion systems. They include vapor pressure increase for curved interfaces, nucleation, capillary condensation, Ostwald ripening and so on. The smaller the radius of curvature is, the more significant Kelvin equation becomes. Therefore, its meaning, curvature effect, and importance are examined and discussed.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.195-201
• /
• 2017

To study the effect of oxyfluorination on water dispersion of phthalocyanine blue(C.I. pigment blue 15:3), the pigment was oxyfluorinated using various oxygen to fluorine ratio of the reactant gas. After the oxyfluorination of the phthalocyanine blue pigment, no significant change in FT-IR spectra was observed, whereas XPS spectra showed the introduction of oxygen and fluorine containing functional groups. This suggests that the oxyfluorination of the pigment only occurred on the surface of the pigment particle and resulted in no significant change in UV-Vis spectra of the pigment. However, the oxyflurinated pigments showed improved water dispersion, compared to the non-treated pigment. Especially, when the oxygen to fluorine ratio was 47:3, the water dispersion of the oxyfluorinated pigments significantly increased, compared to the non-treated pigments. This suggests that the oxyfluorination of the phthalocyanine blue pigment has a potential to be used as a water dispersion improving method.

• Atmosphere
• /
• v.22 no.1
• /
• pp.47-55
• /
• 2012

The characteristics of flow and pollutant dispersion for fire scenarios in an urban area are numerically investigated. A computational fluid dynamics (CFD) model coupled to a mesoscale weather research and forecasting (WRF) model is used in this study. In order to more accurately represent the effect of topography and buildings, the geographic information system (GIS) data is used as an input data of the CFD model. Considering prevailing wind, firing time, and firing points, four fire scenarios are setup in April 2008 when fire events occurred most frequently in recent five years. It is shown that the building configuration mainly determines wind speed and direction in the urban area. The pollutant dispersion patterns are different for each fire scenario, because of the influence of the detailed flow. The pollutant concentration is high in the horse-shoe vortex and recirculation zones (caused by buildings) close to the fire point. It thus means that the potential damage areas are different for each fire scenario due to the different flow and dispersion patterns. These results suggest that the accurate understanding of the urban flow is important to assess the effect of the pollutant dispersion caused by fire in an urban area. The present study also demonstrates that CFD model can be useful for the assessment of urban environment.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.451-458
• /
• 2014

Waterborne polyurethane dispersion (WPUD) was prepared from polycarbonate diol (PCD), isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as starting materials. Then, waterborne acrylic polyurethane dispersion (AUD) was synthesized by reacting the WPUD with different types of acrylate monomers, such as methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA) and butyl acrylate (BA). Subsequently, the AUD was mixed with multi-walled carbon nanotube (MWCNT) to yield a conductive coating solution, and the mixture was coated on the polycarbonate substrate. The pencil hardness, abrasion resistance and chemical resistance of the coating films from AUD were improved than those from WPUD, while the electrical conductivity of the coating films from AUD was decreased than that of WPUD. Also, the effect of acrylate types on the properties of coating films was investigated. The AUD obtained from HEMA showed the strongest pencil hardness, while the AUD obtained from MMA exhibited the strongest abrasion resistance, chemical resistance and electrical conductivity among several types of acrylate monomers.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.543-549
• /
• 2007

We synthesized various polyurethanes(PU) haying different hard segments with different molecular weights of the soft segment to explore the effect of structure on the dispersion of silver particle in the phase of synthesized polyurethanes matrix. The thermal stability was increased by increasing the number of aromatic compound, while the degree of dispersion for silver particle was decreased. Silver particles showed better dispersion in the PU matrix having aromatic compounds when the soft segments were held constant. On the contrary, when the hard segment was held constant, silver particles on the PU matrix haying low $M_w$ of soft segment showed better dispersion than high $M_w$ of soft segment because poor chain mobility of low $M_w$ of soft segment restricted re-aggregation of silver particle. A sheet resistance of composite materials showed different aspects. In this case, the inter connection between silver particles was more important than its dispersion. In this study, the NDI-PEG 900/silver particle composite film showed the best thermal stability and electro conductivity.