• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권6호
• /
• pp.316-321
• /
• 1999

Disk type single phase switched reluctance motor which is a simple robust construction, simple control circuit and low manufacturing cost, has a characteristics of axial and radial flux machines. However, because this DSPSRM has a complicated magnetic circuit, it is difficult to analyze the design characteristics.. In this study, the calculation of design parameter based on the conventional design theory of electric machine and the characteristics analysis by computer simulation was performed. As the DSPSRM has the characteristics of both AFM and RFM, it is difficult to analyze its characteristics by the 2D FEM. 3D FEM was applied in the analysis of energy distribution and approximated calculation of torque characteristics with rotor positions. With analysis results, prototype of DSPSRM is manufactured.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.194-199
• /
• 1999

For the purpose of improving accuracy in friction and wear test, a hydraulic pin-on-disk type tribotester was developed and its performance was evaluated experimentally. The performance estimation of the tribotesrer was accomplished by comparing both the consistency of the applied normal load and the robustness of the control against the mechanical disturbances with those of the pneumatic and the dead weight loading method respectively. The developed hydraulic pin-on-disk type tribotester showed the better reliability in the performance and the hydraulic loading method provided the more accurate friction coefficient.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.688-692
• /
• 2003

For high voltage operation, a new type of piezoelectric transformer using radial vibration of disk, poled with the same direction was proposed. The piezoelectric ceramics was composed to PZT-PMN-PSN. The diameter and thickness of a disk type piezoelectric transformer were 45［mm］and 4［mm］, respectively The surface ratio of driving electrode and generating electrode of the piezoelectric transformer was 2 : 1. The resonance characteristics of input admittance, step-up voltage ratio and power transmission efficiency of the piezoelectric transformer were measured by varying the load resistance(0.1∼70［kΩ］). As a result, both resonance frequency and step-up voltage ratio increased with increasing load resistance. The step-up voltage ratio was reached more than 60 times under no load resistance. The maximum efficiency of 97% at load resistance of 2kΩ was obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.261-264
• /
• 2003

In this paper, a disk-type piezoelectric transformer for the high power was investigated with the variation of road resistance. The diameter and thickness of a disk-type piezoelectric transformer was 45mm and 4mm, respectively. The piezoelectric ceramics was composed to PZT-PMN-PSN. The ratio of driving electrode and generating electrode is 2:1. The poling direction of driving part and generating part are the same. A voltage step-up ratio increased with increasing the load resistance, $R_L$, so it reached 60 under no road resistance. Also, the maximum efficiency of 97% was obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.988-990
• /
• 2003

Disk type Single Phase SRM(Switched Reluctance Motor) can be used axial and radial direction magnetic flux. Therefore, the energy density per unit of volume is high and the axis can be shorter than that of any other motor. In this paper, the flux-linkage was measured according as rotor positions of disk type single phase SRM, which is designed and fabricated in previous studies. From the measured data, we got the magnetization curves, inductance profile, co-energy and torque. Also, we compared the value of the measurement with the value of analysis through 3D FEM simulation.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.101-105
• /
• 2006

In this paper, a disk-type ultrasonic motor using a combination of radial and bending vibration modes is newly designed and fabricated. The characteristics of the test motor are also measured. By means of traveling elastic wave induced at the surface of circumference of the elastic disk, a steel bar in contact with the surface of circumference of the elastic disk bonded onto the piezoelectric ceramic disks is driven in both directions by changing the sine and cosine voltage inputs. The stator of the motor is composed of two sheets of piezoelectric ceramic disks to bond onto both surfaces of an elastic disk, respectively. As a result, the diameter of the elastic body is increased and the resonant frequency is decreased. The resonant frequency of the stator is about 92 kHz, which is composed with piezoelectric ceramic disks of 28 mm in diameter and 2 mm in thickness, and an elastic body of 32 mm in diameter and 2 mm in thickness. A driving voltage of 20 VPP Produces 200 rpm with a torque of 1Nm and an efficiency of about 10%.

• 터널과지하공간
• /
• 제30권4호
• /
• pp.394-403
• /
• 2020

본 기술보고는 Pin-on-disk 마모시험에서 연속적인 등속도 아르키메데스 나선 경로 계산 방법에 관해 설명한다. 근사 계산된 등속도 아르키메데스 나선은 회전 중심 가까이에서 속도가 불안정하다. 따라서 본 기술보고에서는 등속도 조건을 만족시키기 위해 중공 단면을 가지는 시편을 사용하여 원점 부근에서 오프셋을 주었다. 또한, 내향형 나선과 외향형 나선을 연속적으로 연결하기 위해서 각각의 나선의 시작과 종료 지점 정보를 다음 차례의 나선에 반영하였다. 더불어, 시편의 치수과 마모시험 조건의 변화에 따라 등속도 나선 경로를 편리하게 계산하는 데 도움을 주고자 전용 계산 프로그램을 개발하였다.

• 대한의생명과학회지
• /
• 제17권2호
• /
• pp.135-140
• /
• 2011

We compared three EDTA-based phenotypic screening methods for detecting IMP-1 and VIM-2 type metallo-${\beta}$- lactamase (MBL)-producing isolates of Acinetobacter and Pseudomonas spp., EDTA-double disk synergy test (EDTADDST), Etest MBL, and imipenem (IPM)-EDTA disk test. A total of 183 isolates (65 Acinetobacter spp. and 118 Pseudomonas spp. showing IPM resistance), confirmed to MBL genes by PCR, were used. The criteria for MBL production were (i) presence of a synergistic zone between IPM and EDTA disks in EDTA-DDST, (ii) reduction of IPM minimal inhibitory concentration by ${\geq}$ 3 twofold dilutions in the presence of EDTA in the Etest MBL, and (iii) ${\geq}$ 7 mm increase in the inhibition zone around the IPM plus EDTA disks compared with a sole IPM disk in the IPM-EDTA disk test. In this study using 87 MBL-producing and 96 MBL-nonproducing isolates, the sensitivities/specificities of EDTA-DDST, Etest MBL and IPM-EDTA disk tests were 94.3/78.1%, 89.7/91.7%, and 97.7/95.8%, respectively. When the threshold for the increase of the inhibition zone around the IPM plus EDTA disk over a sole IPM disk was altered to ${\geq}$ 5 mm and ${\geq}$ 8 mm for Acinetobacter spp. and Pseudomonas spp., respectively, the sensitivity and specificity of the test were 98.9% and 96.9%, respectively. Of the three EDTA-based phenotypic tests, the IMP-EDTA disk test was superior for detection of MBL-producing isolates.

• 한국전자파학회논문지
• /
• 제18권1호
• /
• pp.62-75
• /
• 2007

본 논문은 단위 방사 소자의 이득을 증가시키기 위한 성형 빔 안테나에 관한 것이다. 제안하는 안테나 구조는 크게 여기 소자와 다층 원형 도체 배열 구조로 구성된다. 광대역에 걸쳐 전자파 전력이 다층 원형 도체 배열로 방사하기 위한 여기 소자로 스택 마이크로스트립 패치 소자가 사용되었으며, 고이득 빔 성형을 위한 지향 소자의 역할을 담당하는 다층 원형 도체 배열 소자들은 여기 소자 위에 주기적으로 유한하게 적층되었다. 제안하는 안테나가 고이득 특성을 얻기 위해서는 여기 소자와 다층 원형 도체 배열 소자들 간의 효율적인 전력 결합이 이루어져야 하며, 이를 위해 주어진 설계 규격에 따라 여기 소자 및 다층 원형 도체 배열 소자들의 설계 변수들은 함께 최적화되어야 한다. 본 연구에서는 고이득 성형 빔 안테나는 $9.6{\sim}10.4\;GHz$ 주파수 대역 및 선형 편파 조건하에서 최적화 설계되었으며, 또한 안테나의 다층 원형 도체 배열 소자들을 구현하는 2가지 방법 즉, 얇은 유전체 필름을 이용하는 방법과 유전체 폼을 이용하는 방법들도 제안되었다. 특히, 유전체 필름을 이용하는 안테나에 대해서는 컴퓨터 시뮬레이션 과정을 통해, 원형 도체 배열 소자들의 적층 수에 따른 안테나의 전기적인 성능 변화들을 보여주었다. 유전체 필름(Type 1)과 유전체 폼(Type 2)을 이용한 2종류의 안테나 시제품들을 제작하였으며, 얇은 유전체 필름을 이용한 안테나 시제품에 대해선 시뮬레이션 된 전기적 성능 결과와 비교를 위해 원형 도체 배열 적층 수에 따른 안테나의 전기적인 성능 변화들을 실험하였다. 측정된 이득 성능은 시뮬레이션 이득 성능과 거의 유사한 결과를 보여주었으며, 원형 도체 적층 수에 따라 안테나 이득 변화는 주기성을 보였다. 10 GHz 중심 주파수에서 측정된 Type 1 안테나의 전기적 성능은 원형 도체 배열을 10개 적층(disk10)하였을 때, 15.65 dBi의 최대 안테나 이득과 11.4 dB 이상의 입력 반사 손실 성능을 보여 주었으며, 다층 원형 도체 배열 구조에 의해 약 5 dB의 이득 향상 효과를 얻을 수 있었다. 또한, 원형 도체를 12개 적층하였을 때, 외곽 유전체 링 효과에 의해 Type 1 안테나는 Type 2 안테나보다 상대적으로 약 1.35 dB 만큼 이득이 더 높았으며, 각 안테나의 3 dB 빔 폭은 각각 약 $28^{\circ}$와 $36^{\circ}$로 측정되었다.

• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.217-224
• /
• 2009

In this study, friction tests were carried out in order to investigate the friction behavior of textured surface in unlubricated state using ball-on-disk type apparatus. Test specimens were SUJ2 bearing steel ball and SM45C steel disk. Square arrays of circular micro-dimples were created on the surface of disk specimen by Nd:YAG Laser. Friction tests were performed for the disk specimen with various micro-dimple parameters and was also conducted for the variation of normal loads and relative velocities. The results showed that fiction coefficient of textured surface was lower than that of non-textured surface and the deeper depth of micro-dimple was, the lower friction coefficient obtained at the same diameter of micro-dimple in unlubricated state. Area density of micro-dimple had an effect on the friction coefficient. It was also found that friction coefficient generally decreased with the increase of normal load and relative velocity.