• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.120-124
• /
• 1991

In this paper, we consider the maneuvering detection and target tracking problem in uncertain linear discrete-time systems. The maneuvering detection is based on X$^{2}$ test[2,71, where Kalman filters have been utilized so far. The target tracking is performed by the maneuvering input compensation based on a maximum likelihood estimator. KF has been known to diverge when some modelling errors exist and fail to detect the maneuvering and to track the target in uncertain systems. Thus this paper adopt the FIR filter[l], which is known to be robust to modelling errors, for maneuvering detection and target tracking problem. Various computer simulations show the superior performance of the FIR filter in this problem.

• 제어로봇시스템학회논문지
• /
• 제20권12호
• /
• pp.1284-1289
• /
• 2014

In this Paper, outdoor position estimation system was implemented using GPS (Global Positioning System) and INS (Inertial Navigation System). GPS position information has lots of errors by interference from obstacles and weather, the surrounding environment. To reduce these errors, multiple GPS system is used. Also, the Discrete Wavelet Transforms was applied to INS data for compensation of its error. In this paper, position estimation of the mobile robot in the straight line is conducted by EKF (Extended Kalman Filter). However, curve running position estimation is less accurate than straight line due to phase change in rotation. The curve is recognized through the rate of change in heading angle and the position estimation precision of the initial curve was improved by UPF (Unscented Particle Filter). In the case of UPF, if the number of particle is so many that big memory gets size is needed and processing speed becomes late. So, it only used the position estimation in the initial curve. Thereafter, the position of mobile robot in curve is estimated through switching from UPF to EKF again. Through the experiments, we verify the superiority of the system and make a conclusion.

• 로봇학회논문지
• /
• 제10권1호
• /
• pp.1-8
• /
• 2015

This paper proposes a study for accurate surface localization system using DWT(Discrete Wavelet Transform) and GPS/INS fusion algorithm. Because the propagation in the underwater is not passed by characteristics of the medium unlike the ground, the sonar system like DVL is used instead of GPS. But since these systems are installed on the seafloor and operated, a long time is required for installation and navigation systems are limited outside of the range area. And it is difficult to estimate position in a three-dimensional considering the depth in actual marine environment. In this paper, before the development of underwater localization system, precisely estimated position system is proposed in a two-dimensional by developing surface localization system using removing noise and disturbance with DWT and relatively inexpensive GPS and INS sensor.

• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.259-273
• /
• 2023

Real-time hybrid simulation (RTHS) is an effective experimental technique for structural dynamic assessment. However, time delay causes displacement de-synchronization at the interface between the numerical and physical substructures, negatively affecting the accuracy and stability of RTHS. To this end, the authors have proposed a model-based adaptive control strategy with a Kalman filter (MAC-KF). In the proposed method, the time delay is mainly mitigated by a parameterized feedforward controller, which is designed using the discrete inverse model of the control plant and adjusted using the KF based on the displacement command and measurement. A feedback controller is employed to improve the robustness of the controller. The objective of this study is to further validate the power of dealing with a nonlinear control plant and to investigate the potential challenges of the proposed method through actual experiments. In particular, the effect of the order of the feedforward controller on tracking performance was numerically investigated using a nonlinear control plant; a series of actual RTHS of a frame structure equipped with a magnetorheological damper was performed using the proposed method. The findings reveal significant improvement in tracking accuracy, demonstrating that the proposed method effectively suppresses the time delay in RTHS. In addition, the parameters of the control plant are timely updated, indicating that it is feasible to estimate the control plant parameter by KF. The order of the feedforward controller has a limited effect on the control performance of the MAC-KF method, and the feedback controller is beneficial to promote the accuracy of RTHS.

• 한국정밀공학회지
• /
• 제9권2호
• /
• pp.128-137
• /
• 1992

An automatic noise detection system is developed to sense abnormal noises in operating a microwave electronic range. A noise detection method is presented which accounts for the effects of backgound and dynamic noises of the range. A recursive formula used as a noise estimator is a special case of the discrete-time Kalman filter in stochastic processes. Noise levels were measured using a noise acquisition processor in a closed room free of background noise, and detected signals were processes using a microcomputer. The results obtaines showed that the fault detection system should be fast in response to the data acquired and should be high in accuracy and reliability.

• 한국소음진동공학회논문집
• /
• 제15권7호
• /
• pp.878-884
• /
• 2005

This paper presents an algorithm for the precision motion control based on the dynamic characteristics of piezoelectric actuators in the inchworm. The dynamic characteristics are identified by the frequency domain modeling technique using the experimental data. For the motion control, the hysteresis behavior is compensated by the inverse hysteresis model. The dynamic stiffness of an inchworm is generally low compared to its driving condition, so mechanical vibration may degenerate the motion accuracy of the inchworm. The Sliding mode controller and the Kalman filter are designed for motion control of the inch-worm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2537-2539
• /
• 2002

This paper presents an in-process measurement system for shaft radius measurement during grinding process. This system does not require to stop the grinding process, which can enhance productivity and quality. For data analysis, the measurement system is modeled as a linearized discrete form where the states with noise are estimated by an extended Kalman filter. This system has been validated through simulations and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.537-540
• /
• 1998

This thesis deals with the design problem of the state estimator for digital servo system. Digital servo system has input time delay, which depends on the size of control algorithm. The delayed input is a factor that brings out the state estimation error. So, in order to reduce this state estimation error of the system, we proposes a state estimator in which the delayed input of the system is considered. At first, a discrete-time state-space model is established accounting for the delayed input. Next, the state estimator is designed based on this model. we employ Kalman filter algorithm in design of the state estimator. The performance of proposed state estimator is exemplified via some simulations and experiment for servo system. And robustness of the proposed estimator to modelling error by variation of the system parameter is also shown in these simulations.

• Structural Engineering and Mechanics
• /
• 제81권1호
• /
• pp.51-57
• /
• 2022

The problem of optimal stochastic GA control of the system with uncertain parameters and unsure noise covariates is studied. First, without knowing the explicit form of the dynamic system, the open-loop determinism problem with path optimization is solved. Next, Gaussian linear quadratic controllers (LQG) are designed for linear systems that depend on the nominal path. A robust genetic neural network (NN) fuzzy controller is synthesized, which consists of a Kalman filter and an optimal controller to assure the asymptotic stability of the discrete control system. A simulation is performed to prove the suitability and performance of the recommended algorithm. The results indicated that the recommended method is a feasible method to improve the performance of active tuned mass damper (ATMD) shear buildings under random earthquake disturbances.

• 방송공학회논문지
• /
• 제1권2호
• /
• pp.176-187
• /
• 1996

본고는 로보트 팔의 선단에 부착된 카메라에 의하여 촬영된 일련의 스테레오 영상을 이용하여 운동물체의 3차원 자세 (위치와 방향)를 정확히 추정하는 방법을 다룬다. 본고는 이미 발표된 바 있는 연구결과를 확장한 것으로서[1], 2차원 영상의 측정잡음 뿐만아니라[1], 또한 로보트 팔의 죠인트 각도의 랜덤잡음이 함께 존재할 경우 world 좌표계 (또는 로보트 기지좌표계)를 기준으로 한 운동물체의 3차원 자세의 추정에 중점을 둔다. 이를 위하여, 다음 사항에 근거하여 선형 Kalman 필터를 유도한다. (1) 2차원 영상의 측정잡음이 3차원 공간으로 전파되는 것을 분석함으로써, 이에 기인한 물체좌표계의 방향오차를 카메라 좌표계를 기준으로 하여 모델링한다; (2) 죠인트 각도 오차에 의한 로보트 선단좌표계의 방향오차를 (1)의 결과와 결합하여 extended Jacobian matrix를 유도한다; 그리고 (3) 본질적으로 비선형인 물체의 회전운동을 quaternion을 도입함으로써 선형화 한다. 운동 파라메터는 추정된 quaternion으로부터 반복 최소자승 방법을 이용하여 계산된다. 모의실험 결과, 추정오차가 상당히 감소되고, 실제의 운동 파라메터가 참 값으로 정확히 수렴함을 알 수 있다.