• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.173-179
• /
• 1996

A computer simulation has been performed for the application to the elastoplastic stress analysis in a discontinuous composite solid. To obtain the internal field quantities of composite the micromechanics analysis and finite element analysis (FEA) were implemented. As the procedure the reasonably optimized FE mesh generations the appropriate imposition of boundary condition and the relevant postprocessing such as elastoplastic thermomechanical analysis were taken into account. For the numerical illustration an aligned axisymmetric single fiber model has been employed to assess field quantities. It was found that the proposed simulation methodology for stress analysis is applicable to the complicated inhomogeneous solid for the investigation of micromechanical behavior.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.859-864
• /
• 2003

In these days, the deterioration of bridges make it necessary for decks to be replaced and it is inevitable to apply the precast decks to minimize the traffic control induced from the deck placement. This precast deck construction makes the physically discontinuous interface between old and new concrete. Usually, the adhesive force at this interface are ignored. However, for crack behavior and reliable long term behavior, it is required to evaluate the exact value of the cohesive force at the interface. This research investigates the cohesive characteristics at the interface. Four different interface surface conditions are tested and three different methods are used to measure the cohesive strength at the interface. In addition, cohesive characteristic at the surface between precast panels are investigated with different interface surface conditions.

• 제어로봇시스템학회논문지
• /
• 제13권1호
• /
• pp.15-18
• /
• 2007

We consider the problem of designing a static output feedback sliding mode control law for linear dynamical systems with mismatched uncertainties in the state matrix. We assume that an output dependent sliding surface guaranteeing the quadratic stability of the sliding mode dynamics is given, the reachability condition is not required to be satisfied globally, and the output feedback sliding mode control law complises both linear and discontinuous parts. We reduce the problem of designing the linear part of the sliding mode control law to a simple LMI problem which offers design flexibility for combining various useful convex design specifications. Our approach does not require state transformation and it can be applied to mismatched uncertain systems.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.107-111
• /
• 2001

This paper presents a detailed analysis method of the universal input forward converter with LC input filter operating in discontinuous capacitor voltage mode(DCVM) for wind power generation. In this analysis, condition for DCVM operation and conversion ratio for rectified sinusoidal input are made clear. To verify the validity of the analysis, simulation is carried out for the universal input ranging from 90 $V_{rms} to 260 V_{rms}$

• 대한수학회보
• /
• 제37권2호
• /
• pp.229-247
• /
• 2000

This paper is concerned with the impulsive Cauchy problem where the control function u is a possibly discontinuous vector-valued function with finite total variation. We assume that the vector fields f, $g_i$(i=1,…, m) are dependent on the time variable. The impulsive Cauchy problem is of the form x(t)=f(t,x) +$\SUMg_i(t,x)u_i(t)$, $t\in$[0,T], x(0)=$\in\; R^n$, where the vector fields f, $g_i$ : $\mathbb{R}\; \times\; \mathbb{R}\; \longrightarrow\; \mathbb(R)^n$ are measurable in t and Lipschitz continuous in x, If $g_i's$ satisfy a condition that $\SUM{\mid}g_i(t_2,x){\mid}{\leq}{\phi}$ $\forallt_1\; <\; t-2,x\; {\epsilon}\;\mathbb{R}^n$ for some increasing function $\phi$, then the imput-output function can be continuously extended to measurable functions of bounded variation.

• Corrosion Science and Technology
• /
• 제15권4호
• /
• pp.159-165
• /
• 2016

An attempt has been made to understand the influence of retrogression and re-aging (RRA) on the exfoliation corrosion behaviour of AA 7085 alloy in comparison with the peak aged condition (PA). Immersion tests using ASTM G34 and studies involving electrochemical impedance spectroscopy showed that the RRA treated alloy provided higher resistance to exfoliation corrosion than the PA treated alloy. The improved resistance was attributed to the enhanced Cu content and the discontinuous nature of the grain boundary precipitate, which was revealed through transmission electron microscopy.

• 한국분말재료학회지
• /
• 제8권4호
• /
• pp.253-257
• /
• 2001

The effects of mechanical alloying conditions on the formation of Mn-sulfide powders were analyzed. Impeller rotating speed, lubricant coating and added amounts of process control agent(stearic acid) were selected as a process control factor. MnS compounds are synthesized in 3 hours by mechanical alloying at the alternative milling condition. Discontinuous rotating speed of 1200rpm for 4 minutes and 1000rpm for 1 minute shows more effects on the compound formation of MnS. After coating of lubricant on the wall, elementary Mn and sulfur were partially remained by mechanical alloying. The friction effects of the wall and grinding media on the powders are significantly important to form the compound of MnS.

• 전력전자학회논문지
• /
• 제23권6호
• /
• pp.389-396
• /
• 2018

This study proposes a control method using a repetitive controller for a boost-type PFC rectifier with an APD circuit structure to improve the current distortion caused by DCM condition. Conventional proportional integral controllers have bandwidth limitations in DCM conditions. The performance improvement of the APD controller in the DCM region is verified through simulations and experiments on the compensation of harmonics by the repetitive controller.

• 대한임베디드공학회논문지
• /
• 제14권5호
• /
• pp.269-275
• /
• 2019

This paper addresses the control problem of cyber-physical systems under controller attack. A novel discontinuous Lyapunov functionals are employed to fully utilize sampled-data pattern which characteristic is commonly appeared in cyber-physical systems. By considering the limited resource of networks, cyber-attacks on the controller are considered randomly occurring and are described as an attack function which is nonlinear but assumed to be satisfying Lipschitz condition. Novel criteria for designing controller with robustness for cyber-attacks are developed in terms of linear matrix inequality (LMI). Finally, a numerical example is given to prove the usefulness of the proposed method.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.23-37
• /
• 2002

절취 사면에서의 파괴는 사면의 내부 또는 외부 요인들의 결합에 의해 발생한다. 내부 요인은 사면 자체의 지질 또는 형상 조건과 관련된 파괴 요인이며, 외부 요인은 자연적 또는 인위적으로 사면에 가해지는 파괴 요인이다. 각 요인에 의한 사면 파괴에 기치는 영향의 정도는 사면을 구성하는 지반 조건에 따라 다르며, 사면의 거동 특성에 의해 제어된다. 이 연구에서는 사면의 지반 조건을 거동 특성에 따라 구분하는 기준으로 토층심도율(SR), 블록크기비(BR) 및 암석강도를 사용하였다. 이런 기준에 의하면 사면의 지반 조건은 불연속체적 절리 암반과 연속체적 토상 지반, 파쇄 암반, 괴상 암반으로 구분된다. SFi-system은 이와 같이 구분된 지반 조건에 따라 내부 파괴 요인과 외부 파괴 요인을 평가함으로써 사면 파괴 지수(SFi)를 결정하는 평가 시스템이다. 이 평가 시스템을 실제적으로 사면에 적용한 결과, 사면 파괴 지수는 사면 파괴의 가능성 및 규모와 밀접한 관련이 있음을 보여준다. 따라서 SFi-system은 사면의 파괴 예측과 그 특성 분석을 위한 효과적인 도구로 사용될 수 있다.