References
- T. -S. Huang and G. S. Frankel, Corros. Sci., 49, 858 (2007). https://doi.org/10.1016/j.corsci.2006.04.015
- J. P. Chubb, T. A. Morad, B. S. Hockenhull and J. W. Bristow, Int. J. Fatigue, 17, 49 (1995). https://doi.org/10.1016/0142-1123(95)93050-C
- M. Liao, G. Renaud and N. C. Bellinger, Int. J. Fatigue, 29, 677 (2007). https://doi.org/10.1016/j.ijfatigue.2006.07.003
- D. McNaughtan, M. Worsfold and M. J. Robinson, Corros. Sci., 45, 2377 (2003). https://doi.org/10.1016/S0010-938X(03)00050-7
- M. J. Robinson and N. C. Jackson, Corros. Sci., 41, 1013 (1999). https://doi.org/10.1016/S0010-938X(98)00171-1
- J. Wloka, T. Hack and S. Virtanen, Corros. Sci., 49, 1437 (2007). https://doi.org/10.1016/j.corsci.2006.06.033
- T. Ramgopal, P. Schmutz and G. S. Frankel, J. Electrochem. Soc., 148, B348 (2001). https://doi.org/10.1149/1.1386626
- T. -S. Huang and G. S. Frankel, Corrosion, 63, 731 (2007). https://doi.org/10.5006/1.3278422
- C. Li, Z. Chen, S. Zeng, N. Cheng, Q. Li and Z. Geng, Adv. Mat. Re., 228-229, 968 (2011). https://doi.org/10.4028/www.scientific.net/AMR.228-229.968
- S. Liu, Q. Zhong, Y. Zhang, W. Liu, X, Zhang, Y. Deng, Materials & Design, 31, 3116 (2010). https://doi.org/10.1016/j.matdes.2009.12.038
- ASTM-G34, Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) 1, ASTM. 01, 1 (2013).
- M. Keddam, C. Kuntz, H. Takenouti, D. Schuster and D. Zuil, Electrochim. Acta, 42, 87 (1997). https://doi.org/10.1016/0013-4686(96)00170-3
- M. B. Kannan, and V. S. Raja, Metall. Mater. Trans. A, 38, 2843 (2007). https://doi.org/10.1007/s11661-007-9303-6
- T. D. Burleigh, Corrosion, 47, 89 (1991). https://doi.org/10.5006/1.3585235
- A. Conde and J. de Damborenea, Electrochim. Acta, 43, 849 (1998). https://doi.org/10.1016/S0013-4686(97)00218-1
- F. Mansfeld, Electrochem. Acta, 35, 1533 (1990). https://doi.org/10.1016/0013-4686(90)80007-B
- F. Mansfeld, Electrochem. Acta, 38, 1891 (1993). https://doi.org/10.1016/0013-4686(93)80311-M
- F. Mansfeld, J. Appl. Electrochem., 25, 187 (1995).
- A. K. Mukhopadhyay, K. S. Prasad, V. Kumar, G. M. Reddy, S. V. Kamat and V. K.Varma, Mater. Sci. Forum, 519, 315 (2006).
- A. K. Mukhopadhyay, T. Indian I. Metals, 62, 113 (2009). https://doi.org/10.1007/s12666-009-0015-z
- M. A. Krishnan, V. S. Raja, Corros. Sci., 109, 94 (2016). https://doi.org/10.1016/j.corsci.2016.03.025
- M. Bobby Kannan, R. Raman, A. Mukhopadhyay, V. S. Raja, Corrosion, 59, 881 (2003). https://doi.org/10.5006/1.3287709
- T. Marlaud, A. Deschamps, F. Bley, W. Lefebvre and B. Baroux, Acta Mater., 58, 4814 (2010). https://doi.org/10.1016/j.actamat.2010.05.017
Cited by
- Influence of various heat treatment procedures on the corrosion behavior of Al-Zn-Mg-Cu alloys vol.6, pp.12, 2016, https://doi.org/10.1088/2053-1591/ab5458
- Effects of retrogression and re-aging treatment on precipitation behavior, mechanical and corrosion properties of a Zr+Er modified Al-Zn-Mg-Cu alloy vol.183, pp.None, 2016, https://doi.org/10.1016/j.matchar.2021.111617