• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.1-7
• /
• 2004

GUI program for analyzing directional spectrum waves is introduced in this paper Basically, MLM (Maximum Likelihood Method) was used for this program which was additionally consisted of performing spectral and time domain analysis for two dimensional irregular waves. Moreover, the directionality of directional spectrum waves generated by single summation and double summation method was investigated based on MLM. The directionality from each summation method has good agreement compared with that of target wave spreading function in the case of single wide directional spectrum waves. In addition to this, the resolution of directionality in double summation method was investigated as introducing coherence function between each wave component

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.437-446
• /
• 2003

Field measurements of directional waves were carried out during the summer of 2002 at two coastal sites in water of finite depth. A couple of general purpose instruments were used employing acoustic Doppler technology. The aim of the study was to investigate the spatial behavior of the directional movement of waves as they come ashore. In total,74 tests were carried out during which sea states of low to moderate intensity were recorded. A great number of these runs displayed bimodal characteristics of the spreading function at high frequencies. It was found that in general, the frequency-integrated directional width tends to broaden as the water shoals and when refraction effects are negligible. This is attributed to wave-wave interactions that become pronounced in shallow water. The same directional width showed, also, a tendency to increase with increasing peak frequency of the sea state spectrum. The behavior of the kurtosis of the spreading function was also examined. It was found that for higher frequencies this index tends to increase in wave spectra above a certain sea severity threshold.

• Interdisciplinary Bio Central
• /
• v.1 no.2
• /
• pp.8.1-8.6
• /
• 2009

Introduction: It is a challenge to design a protein score function which stabilizes the native structures of many proteins simultaneously. The coarse-grained description of proteins to construct the pairwise-contact score function usually ignores the backbone directionality of protein structures. We propose a new two-body score function which stabilizes all native states of 1,006 proteins simultaneously. This two-body score function differs from the usual pairwise-contact functions in that it considers two adjacent amino acids at two ends of each peptide bond with the backbone directionality from the N-terminal to the C-terminal. The score is a corresponding propensity for a directional alignment of two adjacent amino acids with their local environments. Results and Discussion: We show that the construction of a directional adjacency-score function was achieved using 1,006 training proteins with the sequence homology less than 30%, which include all representatives of different protein classes. After parameterizing the local environments of amino acids into 9 categories depending on three secondary structures and three kinds of hydrophobicity of amino acids, the 32,400 adjacency-scores of amino acids could be determined by the perceptron learning and the protein threading. These could stabilize simultaneously all native folds of 1,006 training proteins. When these parameters are tested on the new distinct 382 proteins with the sequence homology less than 90%, 371 (97.1%) proteins could recognize their native folds. We also showed using these parameters that the retro sequence of the SH3 domain, the B domain of Staphylococcal protein A, and the B1 domain of Streptococcal protein G could not be stabilized to fold, which agrees with the experimental evidence.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.649-652
• /
• 1992

ECR(Electron Cyclotron Resonance) occure at ${\omega}_c$=${\omega}$, ${\omega}_c$:electron cycltron frequency, ${\omega}$:electromagnetic wave frequency. ECR system have several merit, 1) power transefer efficiency 2) low neutral gas pressure (below 1 mTorr) 3) high plasma density($10^{12}$ $cm^{-3}$). It is applicated variously in the field of semiconductor and new materials as the manufacturing equipment. Magnetic field in ECR system contruct resonance layer (${\omega}$=2.45GHz, $B_z$=875 Gauss) and control plasma. Plasma is almost generated at resonance layer. If the distance between substrate and resonance layer is short, uniformity of plasma is related with profile of resonance layer. Plasma have the property "Cold in Field", so directonality of magnetic field is one of the control factors of anisotropic etching. In this study, we calculate B field and flux line distribution, optimize geometry and submagnet current and improve of magnetic field directionality (99.9%) near substrate. For the purpose of calculation, vector potential A(r,z) and magnetic field B(r,z), green function and numerical integration is used. Object function for submagnet optimization is magnetic field directionality on the substrate and Powell method is used as optimization skim.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.250-258
• /
• 2012

The distribution of wave heights is assumed to be a Rayleigh distribution, based on the assumption of a narrow band and Gaussian distribution of wave elevation. The present study was started with doubts about the narrow band assumption. We selected the wave spectra widely used to simulate irregular random waves. The wave spectra used in this study included the Pierson-Moskowitz spectrum, Bretschneider-Mitsuyasu spectrum, and JONSWAP spectrum. The directionality of the waves was considered. The cosine 2-l type directional spreading function and mixed form of the half-cosine 2-s type with Mitsuyasu type directional spreading are considered here to investigate the effects of a directional spreading function on random waves. The simulated wave height distribution is compared with a Rayleigh distribution.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.626-629
• /
• 2004

Texture imaging, which means texture image creation by co-occurrence relation, has been known as one of useful image analysis methodologies. For this purpose, most commercial remote sensing software provides texture analysis function named GLCM (Grey Level Co-occurrence Matrix). In this study, texture-imaging program for GLCM algorithm is newly implemented in the MS Visual IDE environment. While, additional texture imaging modules based on GLDV (Grey Level Difference Vector) are contained in this program. As for GLCM/GLDV texture variables, it composed of six types of second order texture function in the several quantization levels of 2(binary image), 8, and 16: Homogeneity, Dissimilarity, Energy, Entropy, Angular Second Moment, and Contrast. As for co-occurrence directionality, four directions are provided as $E-W(0^{\circ}),\;N-E(45^{\circ}),\;S-W(135^{\circ}),\;and\;N-S(90^{\circ}),$ and W-E direction is also considered in the negative direction of E- W direction. While, two direction modes are provided in this program: Omni-mode and Circular mode. Omni-mode is to compute all direction to avoid directionality problem, and circular direction is to compute texture variables by circular direction surrounding target pixel. At the second phase of this study, some examples with artificial image and actual satellite imagery are carried out to demonstrate effectiveness of texture imaging or to help texture image interpretation. As the reference, most previous studies related to texture image analysis have been used for the classification purpose, but this study aims at the creation and general uses of texture image for urban remote sensing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.49-58
• /
• 2008

The function of river navigation is being reconsidered from the viewpoints of environment-friendly and energy-efficient, easing traffic congestion, emergency transport in disaster, and supporting tourism and recreation activities, etc. The purpose of this study is to identify current trends and problems of river navigation in Japan and indicate the role that river navigation should play in future and the directionality of development. This study focused on disaster prevention function with especially high importance degree in metropolitan area from among various functions of river navigation, and showed potential of river navigation corresponding to stranded commuter who is examined as a serious problem in government.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.700-711
• /
• 2022

In this study, deepwater design waves were estimated for 16 wave directions and various return periods based on statistical analysis of extreme waves observed for more than 20 years at three stations (Chilbal-do, Geomun-do, Donghae). These values were compared with design waves estimated based on the omni-directional wave data. The Weibull distribution was used as the probability distribution function whose parameters were determined by the least square method. The Kolmogorov-Smirnov test was applied for the goodness of fit test. Notably, the directional design waves were smaller than the omni-directional design wave for every wave direction. The maximum 50-year wave heights for directional sectors were 7.46 m (NNE), 12.05 m (S), and 9,59 m (SSW) at Chilbal-do, Geomun-do and Donghae whereas those for uni-directional wave data were 7.91 m, 13.82 m and 10.38 m, respectively. This implied possible under-estimation of the deepwater design waves for 16 wave directions being currently used in the design of offshore and coastal structures.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.1-6
• /
• 2003

Wave energy dissipation and energy transfer between wave components, during the directional wave breakings, are investigated. Directional incipient and plunging breakers were generated by focusing the multi-frequency and multi-directional wave components at a designed location, based on a constant wave amplitude and a constant wave steepness frequency spectrum. The time series of surface wave elevation was measured at 9 different locations around the wave focusing point, using a wave gauge array. In order to examine the variation of the directional spreading function, the horizontal velocity of fluid motion was also measured. By comparing energy spectrums, before and after the breaking, the characteristics of energy dissipation and energy transfer, caused by wave breaking, are investigated. Their dependencies on directionality, as well as frequency, are analyzed. The breakings significantly dissipate wave energy, through energy transfer, in the upper region of the peak-frequency band, while enhancing wave energy in the low-frequency band.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.872-879
• /
• 2010

High rock-fill embankment is relatively flexible, which makes crest of embankment subject to excessive amplification in displacement due to earthquake loading. To overcome problems related with site response in high embankment, it is essential to evaluate shear-wave velocity profile of the embankment with improved accuracy and reliability. In this aspect, an experimental research was performed to answer how to perform surface-wave tests and to analyze measurements at an embankment site with a sloping ground surface. Unlike flat ground surface, sloping ground may hamper and slow down propagation of surface waves due to multiple reflections and refractions in embankment. To figure out this reasoning for the effect of multiple reflections and refractions due to sloping surface, surface wave tests were performed at a reservoir embankment of Chung-Song in North KyeongSang Province. Parameters involved in surface wave tests at non-flat surface, including source directionality, geometry-related constraint and frequency components in source function, were investigated using field measurements.