• Korea Journal of Hospital Management
• /
• v.2 no.1
• /
• pp.162-182
• /
• 1997

This study was carried out to assess the current status of hospital wage structure and to find out the characteristics and problems in the current hospital wage structure. so as to provide empirical data for establishing a rational wage structure. The data were collected from administrative personnels in charge of wage management in 31 hospitals by using a structured questionnaire through direct visiting and mailing in Pusan Metropolitan City. The major findings in this study were as follows: First, the hospital wage structure applied differently to the basic wages between doctors and the other employees. The wage structure for doctors included performance rate of 51.6%, followed by a synthesis rate of 29.0%, while the wage for the other employees had the synthesis rate of 74.2%, followed by the seniority rate of 12.9%. Second, the wage consisted of a basic wage for 57.5%. the allowance for 21.1% and monthly installed bonus for 21.4%, and the basic wage comprised 68.3% of the total wage for doctors, as compared to 51.9% for nurses and medical technicians and 52.4% for administrative and managerial personnel. The annual rate of the bonus was average 460%, and 96.8% of the hospital did not consider personnel preformance appraisal when paying the bonus. Third, 80.6% of the hospitals applied the legal rate to the retirement allowance while 19.4% applying cumulative rates more than the legal rate, and all of university hospitals applied cumulative rates. Retirement reserves were practiced only in 54.9% of the hospitals. Forth, many hospitals seemed to be interested in applying graded wage system according to performance, by showing that 42.9% of the hospitals were planning to apply it in the future, despite only 9.7% practicing it. Fifth, the wage structure appeared to be complicated due to various kinds of allowances. The kind of the allowances varied among hospitals, ranging from 2 to 26 kinds, and increased as the size of hospital was larger. Sixth, the opinions leading to improve the basic wage structure favored the seniority rate for 51.6% either to maintain the present seniority rate(16.1%) or to apply the incentive pay in addition to the senior rate(35.5%). and also favored the performance rate for 35.5%, followed by the job rate for 12.9%. In conclusion, the current hospital wage structure seemed to be too complicated to reflect personal ability, contribution and performance and to become a big barrier to inducing worker's motivation and to strengthening in competitveness. Therefore it is suggested that the current wage structure should be revised to the one emphasizing on job and ability base with considering characteristics and situation of the hospital, rather than seniority factors.

• Journal of the Korean Vacuum Society
• /
• v.19 no.5
• /
• pp.377-384
• /
• 2010

Many routes have been developed for the synthesis of signle-walled carbon nanotubes (SWCNTs). We spun fibers of SWCNTs directly from vertical furnace using a liquid source of carbon and an iron-contained molecule. The solution was prepared by ethanol as a carbon source, in which ferrocene as a catalyst, thiophene were dissolved. It was then injected from the top of the furnace into hot zone with hydrogen as a carrier gas. We successfully synthesized high-quality SWCNTs by adjusting the various experimental conditions, such as concentration of ferrocene, solution injection rate, concentration of thiophene, and hydrogen flow rate. Measurement of Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy were carried out to find the optimized conditions. The synthesized SWCNTs (1.16~1.64 nm) appeared a bundle structure and well-aligned parallel to the direction of furnace. These results also provide an simple way for high-quality SWCNTs mass production and fabricating direct spining SWCNTs fiber. It will allow one-step production of SWCNTs fiber with potentially excellent properties and wide-range applications.

• Journal of Adhesion and Interface
• /
• v.18 no.2
• /
• pp.75-81
• /
• 2017

In this study, we synthesized mesoporous carbon (Carbonized Ni-FDU-15) containing nanoporous structures and magnetic nanoparticles. Carbonized Ni-FDU-15 was synthesized via evaporation-induced self-assembly (EISA) and direct carbonization by using a triblock copolymer (F127) as a structure-directing agent, a resol precursor as a carbon-pore wall forming material, and nickel (II) nitrate as a metal ion source. The mesoporous carbon has a well-ordered two-dimensional hexagonal structure. Meanwhile, nickel (Ni) metal and nickel oxide (NiO) were produced in the magnetic nanoparticles in the pore wall. The size of the nanoparticles was about 37 nm. The surface area, pore size and pore volume of Carbonized Ni-FDU-15 were $558m^2g^{-1}$, $22.5{\AA}$ and $0.5cm^3g^{-1}$, respectively. Carbonized Ni-FDU-15 was found to move in the direction of magnetic force when magnetic force was externally applied. The magnetic nanoparticle-bearing mesoporous carbons are expected to have high applicability in a wide variety of applications such as adsorption/separation, magnetic storage media, ferrofluid, magnetic resonance imaging (MRI) and drug targeting, etc.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.24-31
• /
• 1996

In this paper, we present a speech translation system for hotel reservation, KT_STS(Korea Telecom Speech Translation System). KT-STS is a speech-to-speech translation system which translates a spoken utterance in Korean into one in Japanese. The system has been designed around the task of hotel reservation(dialogues between a Korean customer and a hotel reservation de나 in Japan). It consists of a Korean speech recognition system, a Korean-to-Japanese machine translation system and a korean speech synthesis system. The Korean speech recognition system is an HMM(Hidden Markov model)-based speaker-independent, continuous speech recognizer which can recognize about 300 word vocabularies. Bigram language model is used as a forward language model and dependency grammar is used for a backward language model. For machine translation, we use dependency grammar and direct transfer method. And Korean speech synthesizer uses the demiphones as a synthesis unit and the method of periodic waveform analysis and reallocation. KT-STS runs in nearly real time on the SPARC20 workstation with one TMS320C30 DSP board. We have achieved the word recognition rate of 94. 68% and the sentence recognition rate of 82.42% after the speech recognition tests. On Korean-to-Japanese translation tests, we achieved translation success rate of 100%. We had an international joint experiment in which our system was connected with another system developed by KDD in Japan using the leased line.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.295-303
• /
• 2011

A series of new aromatic polyhydroxyamides (PHAs) containing imide ring were prepared by direct polycondensation reaction of imide-diacids and two types of bis(o-aminophenol)s including 3,3'-dihydroxybenzidine and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. The polymers were characterized by FT-IR, FT-NMR, DSC and TGA. The inherent viscosities of the PHAs measured at $35^{\circ}C$ in DMAC solution were in the range of 0.49-1.13 dL/g. PHA 2 and 3, except PHA 1, were soluble in polar solvents such as DMAc, DMF and NMP. PHA 4, 5, and 6 containing 6F group showed a higher solubility in less polar solvents. But the polybenzoxazoles (PBOs,) were insoluble in a variety of solvents except partially soluble in sulfuric acid. The PBO 1, 2 and 3 showed maximum weight loss temperature in the range of $650-656^{\circ}C$ and relatively high char yields in the range of 57.4-61.9 % under a nitrogen atmosphere. These results suggested that the introduction of imide or diimide ring in the main chain was effective in improving the thermal stability of PHAs and PBOs.

• Clean Technology
• /
• v.19 no.3
• /
• pp.320-326
• /
• 2013

Nano-sized PtRu-Ni/VC and PtRu-Sn/VC electrocatalysts were synthesized by a one-step radiation-induced reduction (RIR) (30 kGy) process using distilled water as the solvent and Vulcan XC-72 as the supporting material. The obtained electrocatalysts were characterized by transmission electron microscopy (TEM), scanning electron microscope energy dispersive spectroscopic (SEM-EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), respectively. The catalytic efficiency of electrocatalysts was examined for oxygen reduction, MeOH oxidation and CO stripping decreased in the following order, Hydrogen stripping : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/VC$^{(R)}$ (E-TEK). MeOH oxidation : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/ VC$^{(R)}$ (E-TEK). Unit cell performance : PtRu-Sn/VC > PtRu-Ni/VC > PtRu/VC$^{(R)}$ (E-TEK) catalysts.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.453-459
• /
• 2000

FED has deserved an intensive attentioD as a new flat panel display. The present investigationaims at undemtanding the photoluminescence and cathodoluminescent properties of hGaO$_3$: $Eu^{3+}$ phosphor bytaking into account the possibility that this phosphor could be applied for FED. In onler to investigate on.sucha detailed behavior; 8everM experimental skil18 Je conducted to the LaGaO$_3$:$Eu^{3+}$ phosphoL The excimtion srectrum artd emission spectmn were rnezsured in the UV range and then decay curve of $^5D_0$+$^7F_j$transitions\vas examined. The decay behavior of $^5D_0$ emission was anMyzed by a newly Iuoposed cross-relaxation mech-ani8In in asswiation with inteFwnter di1ffision (or migration). The cross-mlaxation from $^5D_0$ to CTB (Cha'geTransfer Band) wuld be a quite retsonable by considering the excitation spectrum. It could be also found thatthe quenching type was changed from ditfrsion controlled process to the direct quenching process -s inJeasing $Eu^{3+}$ oncntration.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.111-117
• /
• 2009

This study aims to verify for humans the suitability of the enzyme-fixed hydrogel used for the patch sensor of the blood sugar testing system without blood sampling, which utilizes reverse iontophoresis. Using acrylate monomers, hydrogel was synthesized to which a certain unit of enzyme is fixed. In order to analyze the material property of the synthesized hydrogel, a structural analysis was performed using FT-IR spectroscopy, while the DSC was used to verify the thermal stability. In addition, with the UV-Vis spectrophotometer, it was verified that the degree of active enzyme is at least 50% greater than the standard product. The SEM was used to verify secure fixation of the enzyme onto the surface. As a result, it was observed that the enzyme is successfully fixed to the surface. Since the hydrogel makes direct contact with a patient's skin, it is essential to evaluate the toxicity when making direct contact with the skin. For that purpose, various sets of tests were undertaken according to the ISO 10993-cytotoxicity, intracutaneous reactivity, skin irritation test and maximization sensitization. Consequently, it was successfully verified that the enzyme-fixed hydrogel have bioavailability.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.281-295
• /
• 2021

In this study, the direct amination of ethanol was performed over impregnated Ni on SiO2-Al2O3 mixed oxide catalysts prepared by varying Si/(Si + Al) molar ratio to 30 mol%. To characterize the physico-chemical properties of the catalysts used, X-ray diffraction (XRD), N2-physisorption, temperature-programmed desorption of iso-propyl alcohol (IPA-TPD), temperature-programmed desorption of ethanol (EtOH-TPD), temperature-programmed reduction with H2 (H2-TPR), H2-chemisorption and transmission electron microscopy (TEM) were used. The acidic property was continuously increased until Si/(Si + Al) = 30 mol% in SiO2-Al2O3 mixed oxides used. The dispersion of Ni metal and surface area, acid characteristics of the supported Ni catalyst have a complex effect on the catalytic reaction activity. The low reduction temperature of nickel oxide and acidic properties were beneficial to the formation of acetonitrile. In terms of conversion of ethanol, Ni/SiO2-Al2O3 catalyst with a molar ratio of 10 mol% Si/(Si+Al) showed the highest activity and a volcanic curve based on it. The tendency of results were consistent in the metal dispersion and catalytic activity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.5
• /
• pp.167-173
• /
• 2023

Li₃V₂(PO₄)₃ and Li₃V₂(PO₄)₃/C composite with single phase monoclinic structure for the cathode materials are successfully synthesized by direct co-precipitation method using N₂H₄·H₂O as the reducing agent and alginic acid as the carbon source, and their electrochemical properties were compared. The particles with approximately 1~2 ㎛ size and the uniform spherical-like morphology of the narrow particle size distribution were obtained. In addition, the residual carbon can also improve the electrical conductivity. The Li₃V₂(PO₄)₃/C composite has improved initial specific discharge capacity and excellent cycle characteristics to maintain capacity stably than Li₃V₂(PO₄)₃. The results indicate that the reducing agent and carbon composite can affect the good crystallinity and electrochemical performance of the cathode materials.