• Title/Summary/Keyword: direct limit

Search Result 479, Processing Time 0.024 seconds

Study on the Characteristics of Performance and Exhaust Emissions of 3-Chamber GDI Engine (3-연소실형 GDI Engine의 성능 및 배기 배출물 특성에 관한 연구)

  • 김봉수;정남훈;진선호;배종욱
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.26 no.1
    • /
    • pp.37-47
    • /
    • 2002
  • Recently gasoline direct injection method has been applied to gasoline engine to reduce fuel consumption rate by controlling fuel air mixture on lean condition by means of stratified charging, and to reduce simultaneously. Pollutant emissions especially NOx and CO by lowering the combustion temperature. But difficulty of controling local fuel air ratio at ignition area in flammability limit unavoidably appeared, because it is merely controlled by injection timing with spatial and temporal distribution of fuel mixture. In this study, the authors devised a uniquely shaped combustion chamber so called three-chamber GDI engine, intended to keep the more reliable fuel air ratio at ignition area. The combustion chamber is divided into three regions. The first region is in the rich combustion division, where the fuel is injected from the fuel injection valve and ignited by the spark plug. The second region is in the lean combustion division, where the combustion gas from the rich combustion division flows out and burns on lean condition. And the last region is in the main combustion division ie in the cylinder, where the gas from the above two combustion divisions mixed together and completes the combustion during expansion stroke. They found that the stable range of operation of three-chamber GDI engine on low-load condition exists in the lean area of average equivalence ratio. And they also found that the reformed engine reveals less specific fuel consumption and less pollutant emissions compared with conventional carburettor type gasoline engine.

Design of a Frequency Domain Equalizer Algorithm for MBOK DS-UWB System (MBOK DS-UWB 시스템을 위한 주파수 영역 등화기 알고리즘의 설계)

  • Kang, Shin-Woo;Im, Se-Bin;Choi, Hyung-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.10A
    • /
    • pp.1034-1041
    • /
    • 2007
  • In this paper, we propose a FD USE (frequency domain minimum mean square error) equalizer algorithm for MBOK DS-UWB (M-ary bi-orthogonal keying direct sequence UWB) systems considered as a PHY proposal for high-speed wireless communication in IEEE 802.15.TG3a. The conventional FD MMSE equalization scheme has a structural limit due to insertion of the cyclic prefix (CP) in all transmit packets, but the proposed scheme is able to equalize the channel effect without CP. In order to overcome channel estimation error by multipath delay, we introduce a moving FFT and a moving average scheme. Compared with conventional FD MMSE equalizer and the traditional TD (time domain) MMSE-RAKE receiver, the proposed FD MMSE equalizer has better BER performance and we demonstrate this result by computer simulation.

A Study of the Design Improvement Measure for the Globalization of Domestic Online Shopping Malls (국내 온라인 쇼핑몰의 글로벌화를 위한 디자인 개선방안 연구)

  • Choi, Yun-Hee;Jo, Seong-Hwan
    • The Journal of the Korea Contents Association
    • /
    • v.15 no.12
    • /
    • pp.73-80
    • /
    • 2015
  • Starting the popularity of Korean dramas exported to China in 1996, the Korean wave started around the world market. Afterwards, as the Korean culture itself as well as dramas rapidly emerged as contents of the Korean market, the foreign direct sale consumers who want to buy Korean goods directly online are increasing at an alarming rate. This study each selected 4 domestic shopping malls and 4 foreign famous shopping malls which were conducting a global marketing currently and compared/researched them in the design aspect in order to apprehend if domestic online shopping malls were properly meeting the consumer environment of the foreign market. As a result, it was revealed that domestic online shopping malls conducting the global marketing could not fully understand the internet environment by countries and were going through a limit of the information delivery by SMS, and could not use the visual signs actively which were useful to the meaning delivery. Accordingly, this thesis suggested a plan to actively utilize the variable element considering various screens to the design, plan to efficiently design the text for solving the language problem by countries, and plan to design using the developing IT technology as a solution to those problems.

The Effect of Youth Participation Behavior on Career Preparation Behavior -Focusing on the Mediating Effect of Career Decision-making Self-efficacy (청소년의 참여행동이 진로준비행동에 미치는 영향 -진로결정 자기효능감의 매개효과를 중심으로-)

  • Cho, Sung-Hui;Kim, Woong-Soo
    • Journal of Digital Convergence
    • /
    • v.15 no.12
    • /
    • pp.605-613
    • /
    • 2017
  • This study aimed to examine the mediating effects of career decision-making self-efficacy in the relation between participation behavior and career preparation behavior in adolescents. Using the data of 1,077 adolescents residing in J region, this study used the path analysis to see the mediating effect of career decision-making self-efficacy. According to the results, participation behavior and career decision-making self-efficacy had direct effects on career preparation behavior. And mediated by career decision-making self-efficacy, participation behavior had indirect effect on career preparation behavior. This study examined the mediating effect of career decision-making self-efficacy of adolescents, which can be the significance of this study in terms of overcoming the limit of presenting direct effects of factors on career preparation behavior. On the basis of the results, convergency suggestions to increase the participation behavior, career decision-making self-efficacy and career preparation behavior of adolescents were discussed.

Arsenic removal from drinking water by direct contact membrane distillation

  • Zoungrana, Ali;Zengin, Ismail H.;Elcik, Harun;Yesilirmak, Dilara;Karadag, Dogan;Cakmakci, Mehmet
    • Membrane and Water Treatment
    • /
    • v.7 no.3
    • /
    • pp.241-255
    • /
    • 2016
  • In this study, the treatability of arsenic (As) contaminated water by direct contact membrane distillation (DCMD) at different delta temperatures (${\Delta}T$) 30, 40 and $50^{\circ}C$ has been investigated. Two different pore sizes ($0.22{\mu}m$ and $0.45{\mu}m$) of hydrophobic membranes made of polyvinylidene fluoride (PVDF) were used. The membrane pore sizes, the operating temperatures, the feed solution As concentration and conductivity have been varied during the experimental tests to follow the removal efficiency and flux behavior. Both membranes tested had high removal efficiency of arsenite (As (III)) and arsenate (As (V)) and all permeates presented As concentration far lower than recommended $10{\mu}g/L$ of world health organization (WHO). As concentration was below detection limit in many permeates. Conductivity reduction efficiency was over 99% and the transmembrane flux (TMF) reached $19L/m^2.h$ at delta temperature (${\Delta}T$) of $50^{\circ}C$ with PVDF $0.45{\mu}m$ membrane. The experimental results also indicated that $0.45{\mu}m$ pore sizes PVDF membranes presented higher flux than $0.22{\mu}m$ pore sizes membranes. Regardless of all operating conditions, highest fluxes were observed at highest ${\Delta}T$ ($50^{\circ}C$).

Detection of C-Reactive Protein Using Direct-binding Quartz Crystal Microbalance Immunosensor (직접결합방식 수정진동자 면역센서에 의한 C-Reactive Protein 검출)

  • Kim, N.;Kim, D.K.;Cho, V.J.
    • KSBB Journal
    • /
    • v.22 no.6
    • /
    • pp.443-446
    • /
    • 2007
  • A prognostic indicator of coronary heart disease, C-reactive protein, was tried to be determined by a batch-type quartz crystal microbalance immunosensor. The sensor was operated by direct-binding mode and the optimum concentration for the corresponding antibody for immobilization was $50{\mu}g/ml$. The reaction buffer for the system was 0.1 M sodium phosphate (pH 7.0) and system operation was performed in the order of baseline stabilization, analyte addition and measurement, and regeneration of the sensor chip with 10 mM NaOH. When plotted in double-logarithmic scale, the sensor showed a linear detection range of 0.27-106.00 nM for rat C-reactive protein with the limit of detection of 0.53 nM. It also showed a good reusability.

Production and Characterization of a Monoclonal Antibody Against Enrofloxacin

  • Chusri, Manaspong;Wongphanit, Pitikarn;Palaga, Tanapat;Puthong, Songchan;Sooksai, Sarintip;Komolpis, Kittinan
    • Journal of Microbiology and Biotechnology
    • /
    • v.23 no.1
    • /
    • pp.69-75
    • /
    • 2013
  • Enrofloxacin is a fluoroquinolone antibiotic approved for the treatment of infections in animals. Because of the side effects to consumers of animal products, the maximum residue limits (MRLs) of enrofloxacin in animal tissues for consumption are regulated. In this study, a monoclonal antibody (mAb) against enrofloxacin was prepared and characterized for the development of a direct competitive enzyme-linked immunosorbent assay (ELISA). The obtained mAb, Enro44, was highly specific for enrofloxacin and had a 50% inhibition concentration ($IC_{50}$) of 1.99 ng/ml in a competitive ELISA, and the limit of detection (LOD) was 0.50 ng/ml. The cross-reactivity of the mAb with other quinolones and fluoroquinolones was lower than 0.01%. The subclass of the mAb Enro44 was identified as IgG1. The antigen (Ag)-captured direct competitive ELISA using the mAb Enro44 was tested on different spiked samples, including chicken muscle, cattle milk, and cattle urine, and the assay demonstrated recoveries of 82-112%, 80-125%, and 78-124%, respectively. Furthermore, the quantitation of enrofloxacin obtained from the ELISA and from high-performance liquid chromatography (HPLC) was in good agreement, with the linear regression coefficient between 0.933 and 1.056. The cDNAs encoding a heavy-chain Fd fragment (VH and CH1) and a light chain of the mAb Enro44 were cloned and sequenced. Taken together, the results obtained reveal a potential use of this mAb in an ELISA for the detection of enrofloxacin in food samples. The information of amino acid sequence of this mAb will be useful for further modification and production of the mAb in a bioreactor.

A Study on the design method and characteristics of "La casa del fascio" in Italian Como city (이탈리아 꼬모(COMO)에 까자 델 파쇼(CASA DEL FASCIO)의 디자인 전개방법에 관한 연구)

  • 이대진
    • Archives of design research
    • /
    • v.17 no.1
    • /
    • pp.135-142
    • /
    • 2004
  • This study is an analyze for Casa del Fascio, of Giuseppe Terragni, an important architect of fascism period of Italy. Based on the spot reinvestigation of first copies and unpublished data in a archive for a month of 2002. August, Terragni, Como, to compromise with the limit of studies up to the present. General's from early scheme to final constructed scheme, finally offered standard way to understand Terragni's scheme. Result of analyze are to two conclusions. 1) It has direct bearings between physical environment of site which was to build from original scheme and final decided external form. Especially there is direct relation between facade and composition of Duomo Cathedral, in the center of Como. 2) Although the image for scheme by architect represented as a physical form which was impossible to analyze the data as development sequence from archive, it influences on the first image, which had changed many times, exists as important element to final constructed scheme.

  • PDF

A Study on Development of High-speed Data Optical Transmission ADC for Minimization of Time Delay (지연시간 최소화를 위한 고속 데이터 광 전송용 ADC 개발에 관한 연구)

  • Park, Jong-Dae;Park, Chan-Hong;Park, Byeong-Ho;Ahn, Chang-yeop;Seong, Hyeon-Kyeong
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.10a
    • /
    • pp.182-185
    • /
    • 2014
  • In this paper, the ADC performs research and development for high speed data transfers to minimize the optical delay. Have more $6{\mu}s$ delay in the data signal converting optical repeater transmission system existing there has been a limit on the high-speed data transmission, and signal conversion. The need to develop a new technique to reduce the delay in time within $2{\mu}s$ data signal converted by using this direct conversion system. It is desired the development of the core technologies necessary for the signal transduction component, such as mobile communications LTE, LTE advanced service transport network is established, the delay time $3{\mu}s$ technology for reducing the delay time in the signal converting a revolutionary step is applied in this paper we have developed an ADC.

  • PDF

Investigation on Electrochemical Property of CNT Fibers and its Non-enzymatic Sensing Performance for Glucose Detection (CNT Fibers의 전기화학적 특성 및 비효소적 글루코스 검출 성능 고찰)

  • Song, Min-Jung
    • Korean Chemical Engineering Research
    • /
    • v.59 no.2
    • /
    • pp.159-164
    • /
    • 2021
  • As the attachable-type wearable devices have received considerable interests, the need for the development of high-performance electrode materials of fabric or textiles type is emerging. In this study, we demonstrated the electrochemical property of CNT fibers electrode as a flexible electrode material and its non-enzymatic glucose sensing performance. Surface morphology of CNT fibers was observed by SEM. And the electrochemical characteristics were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry. The CNT fibers based sensor exhibited improved sensing performances such as high sensitivity, a wide linear range, and low detection limit due to improved electrochemical properties such as low capacitive current, good electrochemical activity by efficient direct electron transfer between the redox species and the electrode interface. Therefore, this study is expected to be used as a basic research for the development of high performance flexible electrode materials based on CNT fibers.