• 한국식물병리학회지
• /
• 제13권4호
• /
• pp.244-247
• /
• 1997

배추 무사마귀병의 발병에 관여하는 환경요인의 영향을 구명하고 약제처리 방법을 연구한 결과는 다음과 같다. 배추 무사마귀병의 발병율은 근침지접종이나 관주 접종 보다는 전염원 삽입접종에서 현저히 높았다. 발병 유인으로 pH와 온도를 조사한 결과 토양 pH는 5-6에서, 토양온도는 $20-25^{\circ}C$에서 발병율이 높았고 pH 7.0이상, 토양온도 $30^{\circ}C$ 이상에서는 발병율이 급격히 감소하였다. 배추 무사마귀병의 방제를 위해서는 fluazinam 0.5% 분제의 토양살포나 종자분의의 단용처리보다는 둘을 병용처리하는 것이 효과적이다.

• 한국조리학회지
• /
• 제13권2호
• /
• pp.254-259
• /
• 2007

최소가공 감자의 갈변을 억제하기 위해 감자를 박피 절단하여 다양한 농도의 citrate buffer와 phosphate buffer로 각각 처리한 후 저밀도 폴리에틸렌 포장지로 밀봉하여 $5^{\circ}C$와 $20^{\circ}C$에 저장하면서 실험에 사용하였다. 최소가공 처리 된 감자를 24시간 저장 후 색도 변화를 측정한 후 ${\Delta}L$값과 ${\Delta}E$ 값을 계산하여 갈변 효과를 조사한 결과, citrate buffer 처리구가 phosphate buffer 처리구에 비하여 전반적으로 우수한 갈변억제 효과를 나타내었으며, 동일 buffer에서 pH가 낮을수록 우수한 효과를 나타내었다. Citrate buffer, pH 3.0에 처리 후 $5^{\circ}C$에 저장한 조건이 대조구에 비하여 약 35배 이상의 효과를 나타내어 가장 우수한 갈변억제능을 나타내었다. 농도별 처리에서는 citrate buffer(pH 3.0)에서 전반적으로 우수한 갈변억제 효과를 나타내고 있었으나, 0.5 M의 농도에서는 phosphate buffer(pH 5.0) 처리구가 더욱 우수한 갈변억제 효과를 나타내었다.

• 폴리머
• /
• 제33권4호
• /
• pp.326-332
• /
• 2009

새로운 감습성 단량체인 N-methacryloyl-N'-ethyl-N'-propyl piperazinium bromide(MANEPPB)를 N-methacryloyl-N'-ethyl piperazine(MANEP)와 1-bromopropane의 4차염화 반응에 의하여 합성하였다. MANEPPB/MMA/AA=60/35/5, 70/25/5, 80/15/5, 90/5/5 및 95/0/5 조성의 전해질 공중합체를 감습막으로 사용하기 위하여 제조하였다. 상기 감습액에 아지리딘 가교제인 trimethylolpropane tris(2-methyl-1-aziridinopropionate)(TTAP)를 혼합하여 금 전극 위에 침적법에 의하여 도포하고 가교반응을 진행하여 습도센서를 제조 하였다. 상대습도에 대한 습도센서의 저항을 측정하였을 때, $20{\sim}90%RH$ 상대습도 영역에서 $10^3$의 저항 값이 변화하였으며, 이것은 상용 습도센서로서 대기의 습도를 측정하는데 요구되는 특성을 보여주었다. 그 밖에 온도 의존성, 주파수 의존성, 히스테리시스, 응답 및 회복 속도 그리고 내수성을 측정하여 습도센서로서 특성을 평가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.111-114
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have been attracted lots of interests in large-area light-emitting display. In this stuffy, an emissive layer was fabricated using Langmuir-Blodgett(LB) technique in organic light-emitting (OLEDs). This emissive organic material was synthesized and named PECCP[poly(3.6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] which has a strong electron donor group and an electron acceptor group in main chain repeated unit. This material has good solubility in common organic solvents such as chloroform. THF, etc, and has a good stability in air. The Langmuir-Blodgett(LB) technique has the advantage of precise control of the thickness down to the molecular scale, In particular, by varying the film thickness it is possible to investigate the metal/polymer interface. Optimum conditions for the LB film deposition are usually determined by investigating a relationship between a surface pressure $\pi$ and an effective are A occupied by one molecule on the subphase. The LB films were deposited on an indium-tin-oxide(ITO) glass at a surface pressure of 10 mN/m and dipping speed of 12 mm/min after spreading PECCP solution on distilled water surphase at room temperature, Cell structure was ITO/PECCP LB film/Alq$_3$/Al. We considered PECCP as a hole -transport layer inserted between the emissive layer and ITO. We also used Alq$_3$ as an emissive layer and an electron transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum and EL spectrum of the OLEDs.

• 한국세라믹학회지
• /
• 제29권8호
• /
• pp.601-608
• /
• 1992

We investigated the influence of several processes, including the preparation of slurry and preform and the heat-treatment of the preform, on the properties of composites to fabricate the carbon-fiber reinforced glass composites having good mechanical properties. Cerander was determined to be the best binder among Cerander, Rhoplex and Elvacite 2045 by the dipping test and the binder within a preform could be completely eliminatd by burning out the specimen under 10-6 Torr at 400$^{\circ}C$ for more than 1h. The fracture behavior of a composite was largely dependent on the uniformity of carbon-fiber distribution within the composite and the heat-treatment condition of the composite. The higher the glass content, the more difficult to obtain uniform distribution of carbon-fiber. As the hot-pressing temperature increased, the densification process of the composite and the formation of pore due to oxidation of carbon fiber occurred competitively. But, above 1000$^{\circ}C$ the latter played a predominant role. We could fabricated the densest 15 vol.% carbon-fiber-content glass composite having the highest toughness and flexural strength of 250 MPa by hot-pressing under 15 MPa at 900$^{\circ}C$ for 30 min.

• 화훼연구
• /
• 제18권2호
• /
• pp.93-97
• /
• 2010

본 연구는 기내에서 재생된 오리엔탈나리 'Casa Blanca'와 'Siberia' 소인경의 새로운 휴면 타파방법을 모색하고자 생장조절물질을 첨가한 온탕처리 조건을 검토하였다. 오리엔탈나리 'Casa Blanca'와 'Siberia' 두 품종 모두 $30^{\circ}C$ 증류수, 120분 온탕처리에서 맹아소요일수는 단축되었으나 맹아율이 낮았다. $GA_{4+7}$ $100mg{\cdot}L^{-1}$용액을$35^{\circ}C$ 에서 1시간 온탕 처리에 의해서 'Casa Blanca'와 'Siberia'의 맹아율은 각각 76.7%으로 크게 촉진되었고 정식 2년차의 생장과 구근 비대가 촉진되었으며, 휴면에 따른 호흡정도를 반영하는 미토콘드리아 단백질 함량과 fumarase 활성도 높아 휴면타파의 생리적 원인도 구명하였다. 생장조절물질($GA_{4+7}$)을 첨가한 온탕처리에 의해 기내에서 재생된 오리엔탈나리 소인경의 휴면을 효과적으로 타파할 수 있었다.

• 지질공학
• /
• 제7권3호
• /
• pp.173-189
• /
• 1997

유성온천장을 중심으로 불측 인접지역에서의 온천개발 가능성을 평가하기 위하여 주변의 지질구조와 지온분포에 관한 연구를 시도하였다. 연구지역 주변지역에서 온천수 형셩과 관련된 요인은 단층과 암맥이며 물탐자료와 지온측정자료 해석결과는 이를 어느 정도 뒷받침하고 있다. EW 예상 단층선은 본 지역의 북부를 스쳐 지나가며 N40$^{\circ}$W 예상 단층선은 본 지역의 서측에서 EW의 예상 단층과 교차한다. 이러한 예상 단측의 위지는 선구조선의 분석, 물탐자료 및 자료 및 지온측정의 결과에서 잘 반영된다. 연구지역 내에는 3개조의 암맥이 관입되어 있는 것으로 판단된다. 지온측정 결과 지온 이상대와 암맥의 위치는 서로 일치하며, 지하 1m와 0.5m 사이의 온도차는 3$^{\circ}C$ 이상이다. 지하 1m와 0.5m 사이의 온도차는 2.5$^{\circ}C$ 이상의 지온 이상대는 연구지역 내에서 N80$^{\circ}$W의 방향으로 형성되어 있다. 암맥의 경사는 암맥의 직선적인 분포나 노두에서의 조사결과로부터 거의 수직인 것으로 판단된다. 온도 이상대 분포와 암맥의 위치로부터 연구지역 내에서 온천수 부존 가능 위치로 세곳을 들을 수 있으며 이들 지점에서 4$0^{\circ}C$ 이상의 온천수를 확보할 수 있는 깊이는 170~200m 내외로 추정된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.399-399
• /
• 2008

Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.

• 농업과학연구
• /
• 제40권4호
• /
• pp.325-331
• /
• 2013

This experiment has been carried out to determine optimal culture conditions for the production of cut flowers and tubers of Calla (Zantedeschia 'Golden Affair' and 'Black Magic') in highlands. Treatments consisted of various levels of root zone environments, Results are as follows: Calla 'Golden Affair' were grown with different mulching materials such as Non-mulching, Black film, reflective film, Rice hull. Mulching materials resulted in no difference in the number of cut flowers but flower length was highest in reflective film. Calla 'Black Magic' were treated with various soil water content, soil type and watering time. Number of cut flowers and flower quality were greatest when the plants were watered at -80 kPa soil water content. No symptoms of soft rot (Erwinia carotovora) was observed at this soil water content. The occurrence of soft rot was observed with similar percentage according to soil type and the soil water content. When Calla 'Black Magic' were watered at the time of soil surface drying, growth was greater compared to others. Air temperature and PPF affected plant growth and photosynthesis. Photosynthetic rate was greatest at $25^{\circ}C$ and PPF $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, while lowest at $28^{\circ}C$ and PPF $800{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Soft rot did not occur without regard to dipping treatment (0, 5, 10, 24, 48 hours) when the day and night temperature were maintained at $25^{\circ}C$ and $20^{\circ}C$, respectively.

• 한국잠사곤충학회지
• /
• 제15권1호
• /
• pp.37-48
• /
• 1973

The purpose of this studies is to improve the cohesion of raw silk through various analyses on cocoon drying, cooking, reeling, re-reeling, and on the properties of water. Also we investigated the correlation between silk testing items which we have reached to the following results. 1. Drying of cocoon When cocoons were slowly dried with 100$^{\circ}C$, the results of cohesion became much better. On the other hand, the results were considerably decreased in case the temperature with 115$^{\circ}C$. 2. Cooking of cocoon In case of the cooking of cocoon, we found that the result of cohesion was best with incomplete cooking, that of the control was next, while in over cooking, the results were very low. Also the results of cohesion were much better when using the method of over cooking with sericin arrestive agent than that of incomplete cooking with sericin agglutinating agent. 3. Reeling of cocoon A) When the temperature of reeling bath was 25-45$^{\circ}C$, the results of cohesion test were much better, but at the temperature below 25$^{\circ}C$ or above 45$^{\circ}C$, the results became worse. B) With out the process of croissieur, the results of cohesion were too bad, but in case of croissieur more than 1cm, cohesion became better rapidly. Further more, we understood that the results of cohesion were improving slightly with longer length of croissieur. C) When the velocity of reeling was increased, the results of cohesion also improved. The best results were shown when reeling velocity was 180-220 r.p.m. But when the velocity was increased more than 220 r.p.m., the results of cohesion got worse more or less. D) When the temperature of the drying pipe in reeling machine was raised, the results of cohesion also showed a tendency to improve. 4. Re-reeling A) We could net reach a conclusion as to have correlation between the number of dipping repeat in vacuum tank and the results of cohesion before re-reeling process. B) When we used Seracol 500 as an agglutination protective agent with l/1000 to l/2000 of water, the results of cohesion test were better. C) When we used Pearl-lite as an agglutination protective agent with 1/1000 to 1/2000 of water, the results of cohesion were considerably better. D) We gained tile best results when used Cohesion Improving Chemical, A-80, with 500-1500 times diluted. 1) Results of cohesion was improved when humidity was low or temperature was high in the rereeling machine. 5. Filature water A) The water pH near the isoelectric point of protein showed the best cohesion, but the farther water pH, the worser results were obtained. B) With the increasing of M-alkalinity in filature water, the results of cohesion were worse. Above all, we understood the tendency of the results of cohesion get worse when the M-alkalinity is increased above 200 ppm. C) By increasing the total hardness of the filature water, it improved the results of cohesion. Especially, when the total hardness was above 300ppm, the results were extremely high. 6. Effects combination of each results A) The result of effects combination in filature processes with the obtained best conditions was distinctively improved. But the results could not reach in mathematicaly double effect. When reelied under worse conditions, the results of cohesion test were too bad. There was "effect limit" for the promotion. B) Generally the results of cohesion were bad when the filature conditions(the temperature, pressure and the properties of water, etc) are processed as sericin loss to be high. On the other hand, the results were very good when lower sericin loss was controlled in filature conditions. C) When filature conditions such as reeling velocity and croissieur length provide pysical cohesion ability and when raw silk dry fast during reeling and re-reeling, we found the result of cohesion was better. 7. Correlation of silk testing items. A) A negative correlation exists between the results of cohesion test and cleanness defect. Another word, the result of cohesion test was found to be worse as cleanness defect increased. B) In cleanness, cohesion has negative correlation against the number of slugs, but we could not find any correlation against long loops, loose ends. C) Cohesion has negative correlation against average neatness and low neatness defect. The better the results of neatness respectively, the better the results of cohesion found. D) There is no correlation between tenacity and the results of cohesion test, but there was high positive correlation between the results of elongation and those of cohesion test. The more elongation, the better the results of cohesion was found.