• 보존과학회지
• /
• 제24권
• /
• pp.57-66
• /
• 2008

출토 부분탄화 목제유물은 물성이 다른 부위가 공존하는 것에 의해 박리와 변형이 일어나기 쉬운 것으로 오래전부터 보고되어 왔지만, 실험연구 등을 통한 연구성과는 많지 않았다. 이번 실험에서는 당알코올법과 일반적으로 널리 사용되고 있는 친수성 수지인 Pdyethyleneglycol(PEG)법을 비교 대상 처리법으로 설정하였다. 중량변화율과 수축변화율, 전자현미경(SEM)관찰에 의한 목재조직의 변화양상을 검토한 결과 PEG4000법은 80%이상 농도까지 단계적 함침이 필요하며 Sugar Alcohol(S A)법은 40%농도 함침에서부터 안정적인 양상을 보여 단기간 함침의 가능성을 나타냈다. 본 연구에 사용한 판상 부분 탄화재의 변형은 주로 미탄화부의 수축에 의한 현상으로 생각되며 PEG4000법의 경우 최종 함침농도가 20%, 40%, 60%에서, S A법은 20%농도에 함침한 샘플에서 목재세포조직의 수축이 확인되었다.

• 복식문화연구
• /
• 제25권6호
• /
• pp.880-892
• /
• 2017

In this study, the appearance change and the heat moisture transfer properties of knitted fabric by yarn shrinkage were examined to obtain useful data on the development of thermo-sensitive functional materials. Eleven types of knitted fabric were knitted using highly bulky acrylic-blended yarn. After shrinking the specimens using dry heat treatment, the appearance change and thickness were measured. An HEC simulator was adopted for measuring the heat moisture transfer properties of specimens by yarn shrinkage. When holes were arranged vertically in the mesh structure, the specimens with 2,500 and 5,000 holes showed high percent change of hole area, appearance, and thickness. When holes were diagonally arranged in the mesh structure, the percent change of hole area in the specimen with 1,250 holes was larger than the one with 2,500 holes. However, the dimensional stability of the specimen with 2,500 holes was better because of its smaller appearance and thickness change. In the tuck structure, the percent change of hole area in the specimen with 625 and 416 holes was relatively large compared with the appearance and thickness change. Furthermore, the hole size in the tuck structure was smaller than that in the mesh structure but the percent change of hole area was larger. Therefore, it was proved that the tuck structure is more suitable than the mesh structure for developing thermo-sensitive functional materials. Heat moisture transfer property test verified that the change of hole area by yarn shrinkage enabled obtaining the thermal effect due to the distinct temperature difference in the inner layer.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권2호
• /
• pp.95-103
• /
• 2012

변형경화형 시멘트 복합체(SHCC)는 직접인장 상황에서 FRCCs에 비해 우수한 변형경화 특성을 갖는 재료이다. 하지만 SHCC는 일반적인 콘크리트에 비해서 시멘트비율이 높은 부배합 이며, 이에 따라서 자기수축이 큰 특성을 갖는 재료이다. 따라서 시멘트 복합체 내에 팽창재를 대체함으로써 수축저감을 통한 성능향상을 기대하였다. 이 연구에서는 각 강도별 SHCC의 배합에 팽창재를 대체함에 따른 역학적특성을 평가하고자 하였다. 시험결과 설계기준 압축강도 70MPa 배합이 압축, 인장, 휨, 시험에서 우수한 역학적 특성을 나타내었으며, 균열 특성에서는 팽창재를 대체한 SHCC가 균열분산 및 연성에서 우수한 특성을 나타내었다.

• 한국항행학회논문지
• /
• 제23권2호
• /
• pp.172-178
• /
• 2019

본 논문에서는 LTCC 다층기판으로 구현할 수동 소자를 수축공정과 무수축공정으로 구분하여 설계, 제작하고 분석하였다. 유전율 7 또는40의 두 종류 세라믹 소재를 사용하여 기본 형태의 수동소자를 다양하게 두 가지 공정으로 제작하여 특성을 비교하였다. 유전율40 기판을 사용할 때 수축공정은 X, Y 방향에서 17%, Z 방향에서 36%의 수축율을 보이는 것과 비교하여, 무수축공정은 X,Y 방향에서 변화하지 않고 Z 방향으로만 43% 수축하여 평면상에서 높은 치수 정밀도와 표면 평탄도를 얻을 수 있다. 측정 값으로 부터 매개 변수를 이용한 경험적 해석 식을 이용하여 제작한 LTCC 소자의 인덕턴스 및 커패시턴스를 추정하였으며 설계 라이브러리 형태로 구현하였다. 유전율과 제작 공정에 따라 인덕터의 권선수와 단위 면적에 따른 커패시턴스를 측정하여 권선수 및 단위면적에 따른 소자값을 예측할 수 있는 다항식을 제시하였다.

• 한국건축시공학회지
• /
• 제15권4호
• /
• pp.359-365
• /
• 2015

본 연구에서는 바닥 모르타르에 발생하는 균열을 방지하기 위해, 팽창성이 있는 재료인 알파반수석고를 활용한 비소성결합재 기반 바닥 모르타르의 경화특성 및 건조수축 특성을 평가하고, 건설현장에 적용하여 외기환경에 노출된 조건에서 바닥 모르타르의 수축변형 거동 및 균열 발생여부를 검토하였다. 그 결과, 슬래그계 바닥 모르타르의 경우 시멘트계 모르타르에 비해 초결 및 종결시간이 급격히 단축되었고 압축강도는 관련기준을 만족하는 것으로 확인되었으며, 초기에 팽창 변형 이후의 수축변형 거동은 시멘트계 모르타르와 유사한 경향을 나타내었다. 슬래그계 바닥 모르타르의 현장 적용 결과 균열이 발생하지 않았으며, 외기환경 조건에 의한 변형률의 차이가 크지 않아 시멘트계 바닥 모르타르에 비해 치수안정성이 큰 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.367-368
• /
• 2007

In this paper, we propose a new de-noising algorithm for 2 dimensional image using discrete wavelet transform. The proposed algorithm consists of edge detection in spatial domain, zero-tree estimation, subband estimation, and shrinkage algorithm. The results from it shows that the denoised image which Is damaged by 20% gaussian noise has 28dB quality for the original one.

• Communications for Statistical Applications and Methods
• /
• 제25권2호
• /
• pp.235-243
• /
• 2018

Many studies exist on the influence of one or few observations on estimators in a variety of statistical models under the "large n, small p" setup; however, diagnostic issues in the regression models have been rarely studied in a high dimensional setup. In the high dimensional data, the influence of observations is more serious because the sample size n is significantly less than the number variables p. Here, we investigate the influence of observations on the least absolute shrinkage and selection operator (LASSO) estimates, suggested by Tibshirani (Journal of the Royal Statistical Society, Series B, 73, 273-282, 1996), and the influence of observations on selected variables by the LASSO in the high dimensional setup. We also derived an analytic expression for the influence of the k observation on LASSO estimates in simple linear regression. Numerical studies based on artificial data and real data are done for illustration. Numerical results showed that the influence of observations on the LASSO estimates and the selected variables by the LASSO in the high dimensional setup is more severe than that in the usual "large n, small p" setup.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.21-24
• /
• 2005

Three dimensional circular braided Glass/Aramid hybrid fabric/epoxy resin composite was fabricated. FBG sensor was embedded along the braid yam in order to monitor the internal dimensional changes of the 3-D braid composite. The amount of cure and thermal shrinkage of epoxy resin was also determined using FBG sensor system. FBG sensors with different grating length were embedded and their response were compared. The thermo-optic coefficient of FBG sensor was measured by several preliminary experiments. The internal strain that measured by FBG sensor and electric strain gauge was compared during compressive test. The released residual strain of the fabricated tubular composite was estimated using cutting method. The internal strain of the composite was estimated using FBG sensor system, and the result was compared with the value from electric strain gauge. It was found that FBG sensor system is a very useful technique to investigate inside region of complicated structure.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.23-30
• /
• 2006

The bending properties, wrinkle resistance, and fabric retention behaviors of cotton knitted fabrics in the wale and course directions were studied for their dependence upon resin finishing, knit structure, and washing cycles. Stiffness, wrinkle recovery angles, and dimensional stability were investigated before and after resin finishing and laundering. It has been found that any change in the physical properties of the knitted fabrics with respect to knit structure and fabric directions are related to accompanying modifications to the state of the fiber properties. The decrease of fabric shrinkage rates and wrinkle recovery properties from increasing laundering cycles is related with resin incorporated on the fiber surface. This study shows that resin finishing on knitted fabrics can be performed only to improve fabric retention properties with reduced wrinkle recovery properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.637-640
• /
• 2006

DuPont Teijin Films (DTF) have developed engineered substrates specifically for the flexible electronics market. $Teonex^{(R)}Q65$ is a biaxially oriented crystalline polyester with a tailored surface and it is emerging as a competitive material for the base substrate in OLED displays and active matrix backplanes. Given the dimensional reproducibility requirements in the display applications, uncontrolled moisture absorption during the processing cycle could potentially be far more significant than the inherent shrinkage of the base substrate. Understanding these effects and optimising the processing steps involved in device manufacture will be critical to achieving the ultimate performance that can be achieved with the base substrate.