• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.588-594
• /
• 1992

Polyisocyanurate has been obtained from toluene diisocyanate(TDI) in the presence of potassium octoate catalyst and the effects of water and butanol in solvent were studied for the determination of the change of viscosity, the reaction time (length of time required for 5 poise of viscosity of product), molecular dispersity of product, and TDI conversion. When butyl acetate contains 0.1% of water by weight, uretidione was formed and a higher conversion was obtained at the condition. The uretidione was not formed by adding butanol to the solvent. At a higher concentration of butanol, a higher TDI conversion and a wider molecular dispersity were obtained.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.56-63
• /
• 1996

A number of thermotropic liquid crystalline polyurethanes with mesogenic unit were synthesized by polyaddition of a para-type diisocyanate such as 1, 4-phenylene diisocyanate(1,4-PDI) with 4, 4'-bis($\omega$-hydorxyalkoxy) biphenyls($BP{m}$) in DMF. The thermal and liquid crystab line properties were examined by differential scanning calorimetry(DSC), polarized optical microscopy, and wide-angle X-ray scattering(WAXS). Intrinsic viscosities of the polymers exbibited two endothermic peaks correspondinding to phase transitions of melting and isotropization. For example, polyurethane(1,4-PDI/($BP{11}$) ) was found to display a liquid crystalline phase between 177 to 205$^{\circ}C$. In order to know how the hydrogen bonding interaction affects the formation of mesophases in polyurethane 1, 4-PDI/($BP{8}$) / thermal processing FT-IR measurements were carried out. It was found that the stretches regarded as shift to higher frequency region with increasing temperature which showed grdually their liquid crystalline phase

• Journal of Adhesion and Interface
• /
• v.18 no.4
• /
• pp.179-182
• /
• 2017

Waterborne polyurethanes(WPU) based on castor oil were successfully prepared using polycaprolactone diol(PCL), castor oil(CO) and 4,4'-methylene dicyclohexyl diisocyanate($H_{12}MDI$) as soft segment part, dimethylolbutanoic acid (DMBA) as emulsifier, and trimethylamine(TEA) as neutralizer based on different molecular weight of prepolymer. The various properties such as mechanical strength and surface reforming were evaluated using UTM, contact angle, FE-SEM based on the different molecular weight of polyol. Waterborne polyurethanes based on castor oil could be considered as a promising candidate to be applied the various adhesion fields.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.300-305
• /
• 2004

High-solid coatings were prepared by blending of previosly synthesized acrylic resins and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The impact resistance, cross-hatch adhesion, $60^{\circ}$specular gloss, and heat resistance of the films proved to be good, and the pencil hardness and drying time proved to be slightly poor. Especially, there was a remarkable improvement in the heat resistance. This improvement may stem from the regular arrangement of ethyl groups introduced into the acrylic resin. As a result of Rigid-body pendulum visco-elasticity measurement, dynamic $T_g$ values of cured films increased with dynamic $T_g$ values.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.411-416
• /
• 2011

NCO terminated polyurethane prepolymers were synthesized from isophorone diisocyanate(IPDI), polycarbonate diol(PCD) and dimethylol propionic acid(DMPA). Subsequently, acrylic terminated prepolymers were prepared by capping the NCO groups of polyurethane prepolymers with different moles of pentaerythritol triacrylate (0~0.024 moles) as a acrylate monomer. The average particle size of the acrylic terminated polyurethane solutions was increased with increasing PETA contents. Also, the prepared coating films showed better abrasion resistance and pencil hardness than pure waterborne polyurethane.

• Journal of Adhesion and Interface
• /
• v.18 no.1
• /
• pp.8-12
• /
• 2017

In this study, waterborne polyurethane was synthesized with polyester polyol, poly(propylene carbonate) (PPC), 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$) and dimethylol propionic acid (DMPA) to improve the water resistance. The properties of the synthesized waterborne polyurethane using poly(propylene carbonate) (WPUP) was evaluated through FT-IR, GPC, DSC and UTM. The mechanical properties were increased with the increase in the amount of PPC. When the ratio of polyester polyol to poly(propylene carbonate) is 9:1, the highest water resistance was showed.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.211-216
• /
• 2017

The dielectric properties of two polyurethanes (PUs) with different hard segments, i.e., aromatic methylene di-p-phenyl diisocyanate (MDI) and aliphatic hexamethylene diisocyanate (HDI), were investigated in the temperature range of -100 to $100^{\circ}C$ and in the frequency range of 1 Hz to 3 kHz. The ${\alpha}$-relaxations induced by the glass transition of the equivalent soft segments in the two PUs occurred at relaxation times of ${\tau}=3.46{\times}10^{-3}s$ for MDI-PU and ${\tau}=3.39{\times}10^{-2}s$ for HDI-PU at $-20^{\circ}C$, in accord with the temperature-frequency superposition principle, resulting in similar shifting factors. However, different I-relaxations were observed for the two PUs. The I-relaxation of MDI-PU occurred due to the mobility of the chain extenders near $80^{\circ}C$ with a slower shifting rate than the ${\alpha}$-relaxation. On the other hand, I-relaxation arising from both the extender and the unconstrained hard segments of HDI-PU occurred at $70{\sim}100^{\circ}C$, indicating complicated dielectric behavior due to partial interaction with the ${\alpha}$-relaxation at high frequencies. Thus, the I-relaxation of HDI-PU did not follow the superposition principle. The dielectric behaviors of the PUs were mainly influenced by their phase transitions, which were affected by the structure and components of the materials.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.8-15
• /
• 1995

A series of thermotropic Polyurethanes mesogenic unit were synthesized by polyaddition of a para-type diisocyanate such as 2,5-tolylene diisocyanate(2,5-TDI) with 4-4'-bis($\omega$-hydroxyalkoxy) biphenls(BPm: $HOCmH_{2m}OC_{6}H_{4}OC_{m}H_{2m}OH$ : m is the carbon number of the hydroxyalkoxy group) in DMF. Intrinsic viscosities of the polymers were in the range of 0.41~0.99dL/g DSC thermograms for these polymers exhibited two endothermic peaks corresponding to phase transitions of melting and isotropization. For examplem polyurethane 2,5-TDI/BPll with [η]=0.99 prepared from 2.5-TDI and 4,4'-bis[11-hydroxyundecaoxy biphenyl(BP11) a liquid crystalline phase from 156 to 173$^{\circ}C$. The thermotropic properites of liquid crystalline polyurethanes have been investigated by wide-angle X-ray scatter(WAXS), infrared (IR) spectroscopy, and differential scanning calorimetry (DSC). The mesomorphic behavior of the polyurethanes was concluded to be greatly dependent on the intermolecular hydrogen bonds through the urethane.

• Elastomers and Composites
• /
• v.58 no.2
• /
• pp.70-80
• /
• 2023

The effect of phenylphosphonic acid (PPOA) on polyurethane (PU) thermal stability was studied through Fourier transform infrared spectroscopy and Thermogravimetric analysis. To synthesize PPOA-modified PUs (PPOA-PUs), polyether-type diols (Mw=62, 106, 190, 419, 605) were chemically modified with PPOA and then reacted with 4,4'-dicyclohexylmethane diisocyanate (H₁₂MDI) and 4,4-diphenylmethane diisocyanate (MDI). During thermal decomposition in air, the PPOA embedded in the PUs formed intumescent phosphocarbonaceous char. Below 400℃, PPOA-H₁₂MDI-PUs were more unstable, as PPOA decomposed at lower temperatures than phenyl groups and aliphatic ethers. Above 550℃, the thermal stability of PUs followed this order: PPOA-MDI-PUs > PPOA-H₁₂MDI-PUs > MDI-PUs > H₁₂MDI-PUs. At 700℃, unmodified PUs had no residue, while the PPOA-MDI-PU residue was 4.4~23.0 wt.% and the PPOA-H₁₂MDI-PU residue was 1.5~17.5 wt.%. The enhanced thermal stability of PPOA-MDI-PUs at high temperatures can be attributed to the synergetic effect of PPOA and phenyl groups on the formation of phosphocarbonaceous char.

• IMMUNE NETWORK
• /
• v.2 no.3
• /
• pp.158-165
• /
• 2002

Background: Toluene diisocyanate (TDI) can cause contact allergy and occupational asthma, but the mechanism underlying sensitization to this chemical compound remains controversal. Also the correlation of mast cell with contact hypersensitivity (CHS) and the role of mast cell in the TDI-induced CHS is unknown. This issue was investigated by administrating TDI on the skin of genetically mast cell-deficient WBB6F1/$J-Kit^{W}/Kit^{W-v}$ ($W/W^{V}$) and congenic normal WBB6F1/J-Kit+/+ (+/+) mice. Methods: To development of animal model of TDI-induced CHS and to investigate the correlation of mast cell with CHS and the role of mast cell in the TDI-induced CHS, $W/W^V$ and +/+ mice were sensitized with TDI on the back skin at day 1 and day 8, and then challenged with 1% TDI on the ear at day 15. At 1, 2, 4, 8, and 24 hours after 1% TDI challenge, the ear thicknesses were measured. It was investigated the histologic changes of dermis in the ear of $W/W^V$ and +/+ mice at 24 hours after 1% TDI challenge. Results: TDI induced a significant ear swelling response in $W/W^V$ and +/+ mice. TDI induced the significant infiltrations of polymorphonuclear leukocytes and eosinophils in $W/W^V$ and +/+ mice, but not of mast cells in normal mice. And TDI increased a characteristic extent of mast cell degranulation in normal mice. There were no significant differences in the ear swelling and the infiltrations of polymorphonuclear leukocytes and eosinophils of normal versus $W/W^V$ mice, either at baseline or after TDI-induced CHS. Conclusion: From the above results, TDI can be used as a murine CHS model, and the mast cells may not be essential in TDI-induced CHS.