• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.285-291
• /
• 2011

NCO terminated polyurethane prepolymers were synthesized from isophorone diisocyanate(IPDI), poly (tetramethylene glycol)(PTMG) and dimethylol propionic acid(DMPA). Subsequently, waterborne polyurethanes were prepared by capping the NCO groups of polyurethane prepolymers with different types of silane coupling agents, such as methyltrimethoxysilane(MTMS), glycidoxypropyl trimethoxysilane(GPTMS), methacryloxypropyl trimethoxysilane (MPTMS) and aminopropyl triethoxysilane(APS). The average particle size of the waterborne polyurethane solutions was increased by adding silane coupling agents. Also, the coating films prepared from GPTMS, MPTMS and APS, exhibited better pencil hardness than those from pure waterborne polyurethane. On the other hand, the coating films from MTMS did not show an improved pencil hardness than those from pure waterborne polyurethane.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.548-553
• /
• 2011

NCO terminated polyurethane prepolymers were synthesized from isophorone diisocyanate(IPDI), polycarbonate diol(PCD) and dimethylol propionic acid(DMPA). Subsequently, acrylic terminated polyurethanes were prepared by capping the NCO groups of polyurethane prepolymers with different types of acrylate monomers, such as 2-hydroxyethyl methacrylate(HEMA), 2-hydroxyethyl acrylate(HEA) and pentaerythritol triacrylate(PETA). The average particle sizes of the acrylic terminated polyurethane solutions were increased by capping acrylate monomers. Also, the prepared coating films showed better abrasion resistance and pencil hardness than those of pure waterborne polyurethanes. The coating film with PETA exhibited the best abrasion resistance and pencil hardness of coating films prepared with three acrylate monomers.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.574-578
• /
• 2010

In this study, the caprolactone modified hydroxy acrylates (CHAs) were synthesized by ring-opening reaction of caprolactone and 2-hydroxyethyl acrylate (2-HEA) as initiator. Also, the caprolactone modified urethane acrylate (UA) oligomers were synthesized by condensation reaction of previously synthesized CHAs, 2-hydroxyethyl acrylate (2-HEA) and hexamethylene diisocyanate trimer (HDT). Using the hydroxy number of CHAs, the molecular weights of the CHAs were calculated easily and their molecular weight was similar to the theoretical molecular weight of them. The viscosity of UA oligomers decreased as increasing a content of CHA in the UA oligomer. Cure films were prepared from UA oligomer, reactive diluents, and UV initiator to investigate their physical properties. The thermal stability and color difference on high temperature for the cured film were improved as increasing the crosslinking density. Their surface hardness was also increased as increasing crosslinking density of the cured films, but their elongation at break was decreased.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.95-102
• /
• 2013

Objectives: The aim of this study is to present an appropriate sampling method for individual exposure assessment based on a comparison of toluene diisocyanate (TDI) concentrations collected through different sampling methods by work process type. Methods: Two plants handling TDIs in the Incheon area were selected. The samplings were taken during respective processes of spray painting, drying, grinding, and foaming, in which the production of TDIs took on different forms. For the sampling methods for airborne TDIs, open-face cassette holder, modified 2-piece cassette holder, and impinger were used, and the sampling was performed simultaneously at the same locations. Results: The comparison of TDI collection concentrations by each process depending on the sampling method showed high concentrations in the order of the impinger, modified 2-piece cassette holder, and open-face cassette holder for spray painting and foaming. In all processes with the exception of drying, TDI collection concentrations were higher for sampling done with the modified 2-piece cassette holder than with the open-face cassette holder. Conclusions: Based on these results, the modified 2-piece cassette holder was found to be a more appropriate sampling method than the open-face cassette holder when taking individual samples of TDIs from spray painting, grinding, and foaming processes. In particular, for individual exposure assessment of the spray painting process, which features comparatively high collection concentrations compared to the other processes, the use of a modified 2-piece cassette holder is considered appropriate.

• Toxicological Research
• /
• v.19 no.2
• /
• pp.133-139
• /
• 2003

Allergic contact dermatitis may be caused by a wide variety of chemicals. A murine local lymph node assay (LLNA) has been developed as an alternative to guinea pig models for assessing the contact sensitization potential of chemical. However, there is a need to develop a nonradioisotopic endpoint for the LLNA, because of the radioisotopic method's requiring the use of special facilities. In this study, we investigated the development of a nonradioisotopic endpoint for LLNA using ELISA (enzyme-linked immunosorbent assay). Female Balb/c mice were treated by the topical application on the dorsum of both ears with four different strong sensitizers, 2,4-dinitrochlorobenzene (DNCB), oxazolone (OXZ), toluene diisocyanate (TDI), and trimellitic anhydride (TMA), and a strong irritant, sodium lauryl sulfate (SLS), once daily for three consecutive days. The proliferation of cells in the auricular Iymph node was analyzed by means of the labelling index (Ll) of bromodeoxyuridine (BrdU) incorporation into cells. The weights of the Iymph nodes in the mice treated with allergens, DNCB, OXZ, TDl and TMA were increased compared to the vehicle control. The stimulation index (Sl) of mice treated with DNCB, OXZ, TDl, and TMA was over three-fold increase compared to the vehicle control. However, the S1 of mice exposed to SLS was not significantly increased compared to the vehicle control, while the lymph node weight of SLS was significantly increased. These results suggest that the LLNA modified endpoint using ELISA based on BrdU incorporation could provide a useful method of screening for irritants and allergens.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1235-1242
• /
• 2019

In this study, prepolymer was synthesized through the reaction of isoporon diisocyanate (IPDI) and dimethylolbutanoic acid (DMBA) based on poly (tetramethylene ether) glycol (PTMG) for the synthesis of water-soluble polyurethane to be used as a leather surface coating applied with ethyl acetate and piperazine. Thereafter, the piperazine was chain-extended with 0.01 M, 0.03 M, 0.05 M, and 0.07 M in the water-dispersed resin, and the tensile strength, elongation, CV (cyclic voltammetry), and solvent resistance analysis were performed. Tensile strength of the prepared sample was measured at 5.422 kg_f/㎟ when the piperazine content was 0.07M, and elongation was measured as 587% when the piperazine was 0.01M. Solvent resistance analysis showed the same solvent resistance regardless of piperazine content, and the redox potential was changed according to piperazine content through CV measurement.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.387-393
• /
• 2016

Fluorinated polyurethane coating solutions were synthesized from perfluoroalkyl alcohol, toluene diisocyanate, and polycarbonate diol as starting materials. Next, coating films were prepared by spin-coating the fluorinated polyurethane coating solutions on the PC substrates, followed by thermal curing at $120^{\circ}C$. The obtained fluorinated polyurethane coating films were characterized by FT-IR spectroscopy, UV-Vis spectrometer, contact angle tester and pencil hardness tester. Contact angle measurements of water on the coating films showed that the addition of perfluoroalkyl alcohol improved the water repellency and increased the contact angle from $81^{\circ}C$ to $111^{\circ}C$. However, the pencil hardness of coating films exhibited a constant grade of H, irrespective of the addition of perfluoroalkyl alcohol.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.451-458
• /
• 2014

Waterborne polyurethane dispersion (WPUD) was prepared from polycarbonate diol (PCD), isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as starting materials. Then, waterborne acrylic polyurethane dispersion (AUD) was synthesized by reacting the WPUD with different types of acrylate monomers, such as methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA) and butyl acrylate (BA). Subsequently, the AUD was mixed with multi-walled carbon nanotube (MWCNT) to yield a conductive coating solution, and the mixture was coated on the polycarbonate substrate. The pencil hardness, abrasion resistance and chemical resistance of the coating films from AUD were improved than those from WPUD, while the electrical conductivity of the coating films from AUD was decreased than that of WPUD. Also, the effect of acrylate types on the properties of coating films was investigated. The AUD obtained from HEMA showed the strongest pencil hardness, while the AUD obtained from MMA exhibited the strongest abrasion resistance, chemical resistance and electrical conductivity among several types of acrylate monomers.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.268-277
• /
• 2001

The MDI(4,4'-diphenyl methane diisocyanate) was mixed with PPG, PEG and trimethylolpropane(TMP) respectively to prepare polyurethane resin. The various physical properties were measured for the mixtures. The gel-time was shortened by adding of PEG and TMP The molecular weight made a greater influence on the gel-time than the number of functional groups. The NCO-OH reaction was more active and faster than the NCO-NCO reaction. The hardness was influenced by crosslinking-density and molecular structure. The NCO-OH reactions yielded the flexible films and the NCO-NCO reactions yielded the brittle films. The increase of crystallinity and shrinkage induced the low adhesion ratio but the adding of TMP induced the high adhesion ratio. The flame-retardancy was influenced by quantity and kinds of flame-retardant. IXOL B-251 was the most excellent among the flame-retardants employed in this study. TCCP was partially separated because of the lack of solubility.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.483-490
• /
• 2014

The effect of microfibrillated cellulose (MFC) content and coupling agent (polymeric methylene diphenyl diisocyanate, pMDI) on the properties of MFC-reinforced polybutylene succinate (PBS) nanocomposite. With increasing MFC content, tensile strength and elastic modulus were increased. More than 1.5 times in tensile strength of PBS/MFC(70/30) nanocomposite was improved by the addition of pMDI (1 phr), compared to the nanocomposite without pMDI. This trend was being significant in nanocomposite with higher MFC content. Thermal stability of the nanocomposite was increased by the addition of pMDI. These improvements is considered to be due to the improvement of MFC dispersion and interfacial adhesion between MFC and PBS matrix.