Korean Chemical Engineering Research

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지
DOI QR코드

DOI QR Code

Preparation of Water Repellent Polyurethane Coating Films Using Perfluoroalkyl Alcohol

과불화 알코올을 이용한 발수성 폴리우레탄 코팅 필름의 제조

  • Kim, Nam Woo (Department of Chemical and Biochemical Engineering, Konyang University) ;
  • Ahn, Chi Young (Department of Chemical and Biochemical Engineering, Konyang University) ;
  • Song, Ki Chang (Department of Chemical and Biochemical Engineering, Konyang University)
  • Received : 2015.12.29
  • Accepted : 2016.01.14
  • Published : 2016.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Fluorinated polyurethane coating solutions were synthesized from perfluoroalkyl alcohol, toluene diisocyanate, and polycarbonate diol as starting materials. Next, coating films were prepared by spin-coating the fluorinated polyurethane coating solutions on the PC substrates, followed by thermal curing at $120^{\circ}C$. The obtained fluorinated polyurethane coating films were characterized by FT-IR spectroscopy, UV-Vis spectrometer, contact angle tester and pencil hardness tester. Contact angle measurements of water on the coating films showed that the addition of perfluoroalkyl alcohol improved the water repellency and increased the contact angle from $81^{\circ}C$ to $111^{\circ}C$. However, the pencil hardness of coating films exhibited a constant grade of H, irrespective of the addition of perfluoroalkyl alcohol.

불소가 함유된 폴리우레탄 코팅 용액을 과불화 알코올, toluene diisocyanate와 polycarbonate diol을 출발물질로 사용하여 합성하였다. 이렇게 합성된 불소 함유 폴리우레탄 코팅 용액을 기재인 PC 위에 스핀 코팅 후 $120^{\circ}C$에서 열경화시켜 코팅 필름을 제조하였다. 제조된 코팅 필름의 물성을 FT-IR spectroscopy, UV-visible spectrometer, 접촉각 측정기와 연필경도 측정기를 사용하여 분석하였다. 과불화 알코올의 첨가는 코팅 필름의 발수성을 향상시켜, 물 접촉각을 $81^{\circ}C$에서 $111^{\circ}C$로 증가시켰다. 그러나 코팅 필름의 연필경도는 과불화 알코올의 첨가에도 불구하고 H로 일정하였다.

Keywords

References

  1. Shin, Y. T., Hong, M. G., Choi, J. J., Lee, W. K., Lee, G. B., Yoo, B. W., Lee, M. G. and Song, K. C., "Preparation and Properties of Aminosilane Terminated Waterborne Polyurethane," Korean Chem. Eng. Res., 48(4), 434-439(2010).
  2. Hong, M. G., Shin, Y. T., Choi, J. J., Lee, W. K., Lee, G. B., Yoo, B. W., Lee, M. G. and Song, K. C., "Preparation of Silylated Waterborne Polyurethane/Silica Nanocomposites Using Colloidal Silica," ibid., 48(5), 561-567(2010).
  3. Kim, D. K., Cha, M. S., Lee, J. E., Lee, K. W. and Lee, S. B., "Surface Properties of Water-Repellency Coating Films and Their Durability Effects," Applied Chemistry, 5(1), 76-79(2001).
  4. Zhu, Q. and Han, C. C., "Study of Telechelic Poyurethane with Perfluoropolyether Tails," Polymer, 51, 877-882(2010). https://doi.org/10.1016/j.polymer.2009.12.033
  5. Kim, Y. S., Lee, J. S. Ji, Q. and McGrath, J. E., "Surface Properties of Fluorinated Oxetane Polyol Modified Polyurethane Block Copolymers," ibid., 43, 7161-7170(2002). https://doi.org/10.1016/S0032-3861(02)00458-5
  6. Li, J., Zhang, X., Liu, Z., Li, W. and Dai, J., "Studies on Waterborne Polyurethanes Based on New Medium Length Fluorinated Diols," J. Fluorine Chemistry, 175, 12-17(2015). https://doi.org/10.1016/j.jfluchem.2015.02.015
  7. Wang, L. F. and Wei, Y. H., "Effect of Soft Segment on Properties of Fluorinated Polyurethanes," Colloids and Surfaces B, 41, 249-255(2005). https://doi.org/10.1016/j.colsurfb.2004.12.014
  8. Yang, F., Zhu, L., Han, D., Cao, R., Li, W., Chen, Y., Wang, X. and Ning, L., "Preparation and Failure Behavior of Fluorine-Containing Acrylic Polyurethane Coating," Progress in Organic Coatings, 90, 455-462(2016). https://doi.org/10.1016/j.porgcoat.2015.11.009
  9. Lim, C. H., Choi, H. S. and Noh, S. T., "Synthesis of Fluorine Polyurethane and Surface Modification," J. Korean Ind. Eng. Chem., 10(6), 913-916(1999).
  10. Idem., "Synthesis of Fluorine Polyurethane and Surface Modification; II. Effect of Polyol Structure and Molecular Weight," ibid. 11(4), 371-376(2000).
  11. ASTM D 3359, "Standard Test Methods for Measuring Adhesion by Tape Test," ASTM International, 927-929(1997).

Cited by

  1. Solubility, Emulsification and Surface Properties of Maleic Anhydride, Perfluorooctyl and Alkyl Meth-Acrylate Terpolymers vol.10, pp.1, 2018, https://doi.org/10.3390/polym10010037
  2. 졸-겔법에 의해 Tetraethoxysilane과 Methyltrimethoxysilane으로부터 발수코팅제 제조 vol.56, pp.3, 2016, https://doi.org/10.9713/kcer.2018.56.3.327