• Journal of International Society for Simulation Surgery
• /
• 제3권1호
• /
• pp.16-21
• /
• 2016

Computed tomography (CT) can completely digitize the interior and the exterior of nearly any object without any destruction. Generally, the resolution for industrial CT is below a few microns. The industrial CT scanning, however, has a limitation because it requires long measuring and processing time. Whereas, 2D X-ray imaging is fast. In this paper, we propose a novel concept of 3D non-destructive inspection technique using the advantages of both micro-CT and dual X-ray images. After registering the master object’s CT data and the sample objects’ dual X-ray images, 3D non-destructive inspection is possible by analyzing the matching results. Calculation for the registration is accelerated by parallel computing using graphics processing unit (GPU).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.308-311
• /
• 2001

Most of the battery charger for electric powered forklift truck are controlled by the method of 3-phased constant current and constant voltage. However, these chargers have several disadvantages like a large charger capacity, and a short battery life time. This paper presents a digital type battery charger based on multi-mode control adding a constant power control and several assistant controls in the conventional control. The whole control system is performed by a low cost one-chip micro-controller and completely digitize. So we can get a high precision control and a good reliability.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.10-13
• /
• 1996

We have developed the digital polysomnograph system to enhance the manual sleep study. This system is composed of host PC and target board. The host computer is IBM-PC Pentium 133 MHz and the target board is PC31 (processor type: TMS320C31). These two Processors communicate with each other by dualport RAM. Target board acquire 16 channel sleep signals from the Polysomnographic system (GRASS model 78, USA) and digitize them. We used high resolution monitor$(1600{\times}1280)$ to simulate the paper-recording quality of polysomnographic signal. We also implemented the GUI based polysomnographic staging program on the windows environment. Clinicians can score the sleep stage, and edit and mark the event efficiently. Finally it can support making patient database.

• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1472-1477
• /
• 2007

현재 정보사회는 다양한 정보를 멀티미디어 환경에서 이용자가 편리한 서비스를 제공받게 된다. 이러한 신호를 처리하는데 디지털화는 필수적이다. 또한 부족한 주파수의 자원을 효율적으로 이용하는 필터 기술 또한 더욱 요구되어지고 있다. 본 논문에서는 저주파 음성 대 역에서의 FIR 디지털 대역 통과 필터를 협대역으로 설계하고 설계된 필터를 DSP Kit를 이용, 실험 검증하고자 한다.

• 대한전자공학회논문지
• /
• 제24권2호
• /
• pp.315-323
• /
• 1987

Generally, general-purpose image processing system is so expensive that not so many users easily can access the system. In this paper attemps have been made to design and describe a general and economical image processing system for real-time aplications such as image data compression, pattern recognition and target tracking. The system comprises an operator console, image data acquisition/display sistem and IBM PC/XT. The system also utilizes a high speed Fairchild 16-bit microprocessor with ALU speed of 375 nsec for system control, algrithm execution and user computation. The system also can digitize /display a 256x 256x 8 bit image in real time and store two frames of images. All image pixels are directly accessible by the microprocessor for fast and efficient computation. Some experimental and illustrative results such as target tracking are presented to show the efficient performance of the system.

• 대한치과기공학회지
• /
• 제46권1호
• /
• pp.15-19
• /
• 2024

An ideal post material should have physical properties similar to those of dentin. Post materials with high elastic moduli may cause root fractures. This clinical report describes the treatment of a severely damaged tooth using a recently introduced material. Polyetherketoneketone (PEKK) is a semicrystalline high-performance thermoplastic polymer. PEKK is a promising material for custom post-and-core fabrication because of its elasticity close to that of dentin, good shock absorbance, machinability, and low cost. A laboratory scanner was used to digitize the conventional impression of a severely damaged maxillary right first molar. A custom PEKK post-and-core was designed and milled using computer-aided design and computer-aided manufacturing technology. Using the proposed technique, a custom PEKK post-and-core was fabricated accurately and human error was reduced. Restoration was luted with resin cement. Custom PEKK post-and-core restorations are a viable alternative for treating severely damaged teeth.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.27-31
• /
• 2010

The purpose of this study was to investigated the usefulness of MR perfusion image comparing with SPECT image. A total of pediatric 30 patients(average age : 7.8) with Moyamoya disease were performed MR Perfusion with 32 channel body coil at 3T from March 01, 2010 to June 10, 2010. The MRI sequences and parameters were as followed : gradient Echo-planar imaging(EPI), TR/TE : 2000ms/50ms, FA : $90^{\circ}$, FOV : $240{\times}240$, Matrix : $128{\times}128$, Thickness : 5mm, Gap : 1.5mm. Images were obtained contrast agent administrated at a rate of 1mL/sec after scan start 10s with a total of slice 1000 images(50 phase/1 slice). It was measured with visual color image and digitize data using MRDx software(IDL version 6.2) and also, it was compared of measurement with values of normal and abnormal ratio to analyze hemodynamic change, and a comparison between perfusion MR with technique using Warm Color at SPECT examination. On MR perfusion examination, the color images from abnormal region to the red collar with rCBV(relative cerebral blood volume) and rCBF(relative cerebral blood flow) caused by increase cerebral blood flow with brain vascular occlusion in surrounding collateral circulation advancement, the blood speed relatively was depicted slowly with blue in MTT(Mean Transit Time) and TTP(Time to Peak) images. The region which was visible abnormally from MR perfusion examination visually were detected as comparison with the same SPECT examination region, would be able to confirm the identical results in MMD(Moyamoya disease)judgments. Hymo-dynamic change in MR perfusion examination produced by increase and delay cerebral blood flow. This change with digitize data and being color imaging makes enable to distinguish between normal and abnormal area. Relatively, MR perfusion examination compared with SPECT examination could bring an excellent image with spatial resolution without radiation expose.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2013년도 제47차 동계학술대회논문집 21권1호
• /
• pp.277-279
• /
• 2013

본 논문에서는 광학적 방법을 이용하여 정색반응을 정량적으로 측정할 수 있는 방법을 제시한다. 정색반응은 발색, 변색의 현상을 일으키는 화학 변화로 시료 용액에 시약을 더하여 특수한 빛을 나타내게 하여, 물질을 정성적으로 검출하는데 이용된다. 하지만 정색반응 결과로 나타난 색상은 사람마다 색구별이 다르므로 정확한 양을 알 수는 없다. 본 연구에서는 시료의 양에 따라 색상 변화의 미세한 차이를 PICkit Serial Analyzer를 사용하여 색상을 수치화하여 시료의 양에 따른 색의 변화를 정량적으로 측정하였다.

• ETRI Journal
• /
• 제32권2호
• /
• pp.214-221
• /
• 2010

Radio frequency (RF) subsampling can be used by radio receivers to directly down-convert and digitize RF signals. A goal of a cognitive radio/software defined ratio (CR/SDR) receiver design is to place the analog-to-digital converter (ADC) as near the antenna as possible. Based on this, a band-pass sampling (BPS) frontend for CR/SDR is proposed and verified. We present a receiver architecture based second-order BPS and signal processing techniques for a digital RF frontend. This paper is focused on the benefits of the second-order BPS architecture in spectrum sensing over a wide frequency band range and in multiband receiving without modification of the RF hardware. Methods to manipulate the spectra are described, and reconstruction filter designs are provided. On the basis of this concept, second-order BPS frontends for CR/SDR systems are designed and verified using a hardware platform.

• 조명전기설비학회논문지
• /
• 제15권5호
• /
• pp.55-60
• /
• 2001

현재 대부분의 전동지게차 충전기는 3상의 일정전류제어와 일정전압제어 방식으로 운전되고 있으며, 이러한 충전방식은 충전기의 이용률을 저하시킬 뿐 아니라 축전지의 수명을 단축시키는 등의 단점을 가지고 있다. 이러한 문제점을 보완하기 위해서, 본 논문에서는 기존의 방식에서 일정전력제어 및 부가적인 제어모드를 첨가한 다중제어 충전방식을 제시하였다. 전체 제어시스템은 저가의 micro-controller를 적용하여 디지털화 시킴으로써 제어정도 및 신뢰성을 향상시켰으며, 제어장치의 소형화와 함께 저 가격화를 실현하였다.