• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.413-421
• /
• 2015

Regularized Blind Deconvolution is a problem applicable in degraded images in order to bring the original image out of blur. Multichannel blind Deconvolution considered as an optimization problem. Each step in the optimization is considered as variable splitting problem using an algorithm called Alternating Minimization Algorithm. Each Step in the Variable splitting undergoes Augmented Lagrangian method (ALM) / Bregman Iterative method. Regularization is used where an ill posed problem converted into a well posed problem. Two well known regularizers are Tikhonov class and Total Variation (TV) / L2 model. TV can be isotropic and anisotropic, where isotropic for L2 norm and anisotropic for L1 norm. Based on many probabilistic model and Fourier Transforms Image deblurring can be solved. Here in this paper to improve the performance, we have used an adaptive regularization filtering and isotropic TV model Lp norm. Image deblurring is applicable in the areas such as medical image sensing, astrophotography, traffic signal monitoring, remote sensors, case investigation and even images that are taken using a digital camera / mobile cameras.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2015

A wireless sensor network (WSN) is designed and implemented for a freeze dryer. Freeze-drying technology is widely used in the fields of pharmacy and biotechnology as well as the food and agriculture industries. Taking into account the demand for high-resolution pressure and temperature measurements in a freeze dryer, the proposed WSN has a significant advantage of creating a monitoring environment in a freeze dryer. The proposed WSN uses a ZigBee/IEEE 802.15.4 network with an altimeter module that contains a high-resolution pressure and temperature sensor with a serial digital data interface. The ZigBee network is suitable for low-energy and low-data-rate applications in the field of wireless communication. The altimeter module is capable of sensing pressure in the range of 7.5-975 Torr (10-1300 mbar) and temperature in the range of $-40^{\circ}C$ to $125^{\circ}C$ with a DC power consumption of $3{\mu}W$. The implemented WSN is installed in a commercial laboratory freeze dryer in order to demonstrate its functionality and efficiency. A comparison with the temperature profile measured by a thermocouple installed in the freeze dryer reveals that the resolution of the temperature profile measured by WSN is superior to that measured by the thermocouple.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1048-1050
• /
• 2013

Mobile devices or smartphones are rapidly becoming the central computer and communication network device. Recently, smartphones are programmable and come with a growing set of cheap powerful embedded sensors, such as an accelerometer, digital compass, gyroscope, GPS, microphone, and camera. In this paper, we discuss the wireless gas sensing service architectural and develope the gas sensor monitoring services using smartphone and web server.

• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.16-22
• /
• 2007

The purpose of this study was to determine the influence of muscle fatigue in elbow flexors on the sense of force reproduction. Fifteen healthy subjects were recruited for this study. Maximum voluntary force (MVF) of elbow flexor muscles was measured by a digital tensiometer. Force errors were measured to test accuracy of the sense of force reproduction in elbow flexors. The subject was required to flex the elbow joint, to maintain and concentrate on about 20% of the MVF target force under visual feedback for 3 seconds. After a 5 second period rest, the subject was asked to duplicate the target force actively. Muscle fatigue was evoked with isometric contraction of the elbow flexors. Isometric contraction was continued until a 50% drop in MVF. The difference, in kilogram between the target force and the reproduced force was calculated for measuring force error. Force errors were compared between the non-fatigued condition and the fatigued condition by the paired t-test. Force errors were significantly increased in the fatigued condition compare to non-fatigued condition. This result suggests that the sense of force reproduction can be disturbed by localized muscle fatigue.

• Information and Communications Magazine
• /
• v.31 no.8
• /
• pp.45-53
• /
• 2014

센싱 (Sensing), 엑츄에이팅 (Actuating), 제어 (Control) 및 네트워킹 (Networking) 기술의 급격한 발달로 기계, 전자장비, 사회 기반시설, 에너지 공급 및 소비시설, 의료기기, 자동차 등과 같은 물리 세계를 구성하는 다양한 개체들간의 긴밀한 융합이 가능하게 되었다. 다양한 센서를 통하여 물리 개체들로부터 필요한 정보를 수집, 분석하고 가공된 정보를 다양한 컨트롤러, 엑츄에어터 등과 공유함으로써 기존의 개별 전자기기를 위한 센싱 엑츄에이팅 기반 임베디드 시스템과는 근본적으로 차별화되는 복잡한 시스템 위의 시스템 (Systems of Systems) 기술이 제안되어 개발되고 있다. 이렇게 사이버 세계 정보처리 기능과 물리 세계가 서로 긴밀하게 응답하고, 협력하는 인지형 컨트롤 시스템을 사이버물리시스템 (Cyber-Physical Systems, CPS)이라 부른다. 사이버 물리시스템은 대부분의 정보처리, 제어 컴퓨팅 분야에 적용되어 효율성, 안전성, 보안성 향상에 획기적인 기여를 할 것으로 기대된다. 특히, 지능화된 사이버 정보수집 및 최적 제어 기술을 기반으로 도시의 지능형 교통 제어, 건물그룹의 에너지 소비분석과 최적제어, 스마트 스페이스 서비스 등 다양한 분야에 적용되어 스마트 시티 (Smart City)라는 새로운 지능형 통합 시스템을 구현하고 현실화 하는데 핵심 기능을 담당할 것으로 기대된다. 본고에서는 사이버물리시스템의 전반적인 소개와 함께, 스마트 시티를 현실화하는데 사용될 핵심 기술 분야를 소개하고, 스마트 시티 시스템에서 사이버물리시스템이 어떤 역할을 하는지에 대해, 핵심기술들이 적용되는 도시 내 대상 공간의 규모별로 구분하여 기술한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.865-874
• /
• 2018

This paper is about a smart pillow, and a smart diaper. The smart pillow analyzes the frequency of a baby's cry and applies its digital value to the band pass filter. If the crying is between 300-600Hz, the white noise comes out. The smart diaper alerts to the smart phone if the humidity outside the diaper is over 99%, or the temperature is over $29^{\circ}C$ after the defecation of the baby. The smart diaper also prevents choking of the baby by alert to smart phone if they are in a dangerous position by sensing the location of the infant.

• Journal of Power Electronics
• /
• v.2 no.2
• /
• pp.146-153
• /
• 2002

this paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with direct torque control (DTC). The problem of DTC for high-dynamic performance RSM drive is generating a nonlinear torque due to a saturated nonlinear inductance curve with various load currents. The control system consists of stator flux observer, compensating inductance look-up table, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source unverter, and TMS320C31 DSP controller. The stator flux observer is based on the combined voltage and current model with stator flux feedback adapitve control that inputs are the compensated inductances, current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operation area. It does not requrie the knowledge of any montor paramenters, nor particular care for moter starting, In order to prove the suggested control algorithm, we have simulation and testing at actual experimental system. The developed sensorless control system is showing a good speed control response characterisitic result and high performance features in 20/1500 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.5
• /
• pp.485-490
• /
• 2004

This paper presents a new interpolation algorithm for measuring high resolution position information which is prepared to a nino servo control motor using analog quadrature encoder. In the past, there are large capacity of memory(ROM or RAM) and two high price and resolution A/D(Analog-to-Digital Converter) for sensing two quadrature signals from a analog sinusoidal encoder interpolation. But high resolution of position from sinusoidal encoder can be obtained by using only small capacity of memory, one A/D converter and comparator. Experimental results show that the proposed algorithm is useful for measuring high resolution position.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.465-470
• /
• 2002

A novel phased array antenna system for space-borne polarimetric SAR is proposed and completed in this paper.The antenna system assures polarimetric and multi-mode capability of SAR. It has broadband, high polarization isolation and high port to port isolation. The antenna system is composed of broadband polarimetric microstrip antenna, T/R modules and multifunction beam controller nit. The polarimetric microstrip antenna has more than 100MHz bandwidth at L-band with -30dB polarization isolation and high port to port isolation. The microstrip element and T/R module's structure and characteristics, the subarray's performances measuring results are presented in detail in this paper. A design scheme on beam controller of the phased array antenna is also proposed and completed, which is based on Digital Signal Processing (DSP) chip -TMS320F206. This beam controller unit has small size and high reliability compared with general beam controller. In addition, the multifunction beam controller unit can acquire and then send the T/R module's working states to detection system in real time.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.524-529
• /
• 2002

In this paper, we report the development of two DEM (digital elevation model) generation algorithms over urban areas from an IKONOS stereo pair. One ("EpiMatch") is originally developed for SPOT images and modified for IKONOS images. It uses epipolar geometry for accurate DEM generation. The other is based on graph-cut algorithm in 3D voxel space. This algorithm is believed to work better on height discontinuities than EpiMatch. An IKONOS image pair over Taejon city area was used for tests. Using ground control points obtained from differential GPS, camera model was set up and stereo matching applied. As a result, two DEMs over urban areas were produced. Within a DEM from EpiMatch small houses appear as small "cloudy" patches and large apartment and industrial buildings are visually identifiable. Within the DEM from graph-cut we could achieve better height information on building boundaries. The results show that both algorithms can generate DEMs from IKONOS images although more research is required on handling height discontinuities (for "EpiMatch") and on faster computation (for "Graph-cut").