A High-Performnce Sensorloss Control System of Reluctance Synchronous Motor with Direct Torque Control by Consideration of Nonlinerarly Inductances

  • Kim, Min-Huei (Dept. of Electrical Automatic Eng., Yeungnam college of Science & Technologe) ;
  • Kim, Nam-Hun (School of Electrical and Electronic Eng., Yeugnam University) ;
  • Baik, Won-Sik (School of Electrical and Electronic Eng., Yeugnam University)
  • Published : 2002.04.01

Abstract

this paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with direct torque control (DTC). The problem of DTC for high-dynamic performance RSM drive is generating a nonlinear torque due to a saturated nonlinear inductance curve with various load currents. The control system consists of stator flux observer, compensating inductance look-up table, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source unverter, and TMS320C31 DSP controller. The stator flux observer is based on the combined voltage and current model with stator flux feedback adapitve control that inputs are the compensated inductances, current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operation area. It does not requrie the knowledge of any montor paramenters, nor particular care for moter starting, In order to prove the suggested control algorithm, we have simulation and testing at actual experimental system. The developed sensorless control system is showing a good speed control response characterisitic result and high performance features in 20/1500 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

Keywords

References

  1. Takahashi and T. Noguchi, 'A new quick response and high efficiency strategy of an induction motor', in Conf. Rec. IEEE-lAS Annual Meeting, pp. 495-502. 1985
  2. M. Depenbrock, 'Direct self control for high dynamics performance of inverter feed AC machines', ETZ Arch., Vol. 7, No. 7, pp. 211-218, 1985
  3. Min-Huei Kim, Nam-Hun Kim, Min-Ho Kim, and Dong-Hee Kim, 'An Induction Motor Position Control System with Direct Torque Control', ISlE 2001, pp. 771-774, June 2001
  4. Min-Huei Kim, Nam-Hun Kim, and Won-Sik Baik, 'A High-Performance Position Sensorless Control System of Reluctance Synchronous Motor with Direct Torque', Trans. of KIPE, Vol. 7, No. 1, pp. 81-90, Feb. 2002
  5. Min-Huei Kim, Nam-Hun Kim, and Kyeong-Ho Choi, 'A High-Performance Motion Control System of Synchronous Motor with Direct Torque Control', Trans. of KIEE, Vol. 51B, No.3, pp. 150-157, March 2002
  6. Kuo-Kai Shyu, Chiu-keng Lai, and John Y. Hung, 'Totally Invariant State Feedback Controller for Position Control of Synchronous Reluctance Motor', IEEE Trans. on IE, Vol. 48, No.3, pp. 615-624, June 2001
  7. Matsuo, T. and Lipo, T.A., 'Field oriented control of synchronous reluctance machine', PESC '93 Record, 24th Annual IEEE, pp. 425-431, 1993
  8. Peter Vas, 'Sensorless Vector and Direct Torque Control', Oxford Press, 1998
  9. Iron Boldea, 'Reluctance Synchronous Machines and Drives', Oxford Press. 1996
  10. Bimal K. Bose, 'Power Electronics and Variable Frequency Drivers', IEEE Press, 1997
  11. Hoang Le-Huy, 'Comparison of Field-Oriented Control and Direct Torque Control for Induction Motor', PESC '99, pp. 1245-1252, 1999
  12. Jansen, P.L., R.D. Lorenz, and D.W. Novotny, 'Observer-based direct field orientation in direct field oriented induction machines', IEEE-lAS Annual Meeting, pp. 536-543, Oct. 1993
  13. Boldea I, Janosi L, and Blaabjerg F, 'A modified direct torque control (DTC) of reluctance synchronous motor sensorless drive', Electric Machines & Power Systems, Vol. 28, No. 2, pp. 115-128, 2000 https://doi.org/10.1080/073135600268405
  14. Alfio Consoli, Calogero Cavallaro, and Giuseppe Scarcella, 'Sensorless Torque Control Syncrel Motor Drives', IEEE Trans. on PE, Vol. 15, No. 1, pp. 28-35, Jan. 2000