• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.323-328
• /
• 2007

Communication systems beyond 3G should provide more than 100 Mbps for wireless access. In addition to smart antennas, wireless multi-hop networks are proposed to increase the cell size and throughput. For example, Zigbee technology is expected to provide low cost and low power connectivity and can be implemented in wireless mesh networks larger than is possible with Bluetooth. Also, home embedded system using wireless mesh network is one of the key market areas for Zigbee applications. If the line-of-sight path is shadowed by home obstacles, a direct connection between the access point (AP) and the node is not possible at high frequencies. Therefore, by using multi-hop relay scheme the end node can be reached to AP. In this paper, the relaying of data between the AP and the end node is investigated and the throughput and PER(Packet Error Rate) are evaluated in multi-hop wireless mesh networks by using DSSS/BPSK system.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.325-332
• /
• 2012

VANET(Vehicular Ad-hoc Network), which is a technology to create a network among vehicles, decides the route to the destination using information of neighbors within the transmission range as transmission nodes. The existing routing protocol which uses geographical information can cause delay and disconnection of the network when the density of nodes is not high enough to communicate because it only considers the distance of the relay nodes or destination nodes from the source nodes. To solve the problem, this dissertation suggests a routing algorithm based on zones for stable communications among vehicles in the environment of VANET. I minimize the packet loss rate by dividing the city environment into zones and taking into account not only the distance of the destination but also the density of vehicles to choose the best communications environment. This results in a better performance than the established research when the performance evaluation is implemented.

• Journal of Digital Contents Society
• /
• v.16 no.4
• /
• pp.615-622
• /
• 2015

Recently virtual advertising is located in an important area of interest in the TV market by convenience of application and reduction of cost. The methods of inserting a virtual advertising in broadcasting are Up-link that method insert the image through the production equipment of the broadcasting station and dispatch equipment and technical personnel in the shooting and Down-streaming that method insert a virtual image automatically in relay video using image processing technology. In recent years, the image processing technology is an important research area in the virtual advertising area for automatically insertion of advertising images. In this paper, we propose the method to extract less-informative region in sports video using image processing. The proposed method extracts less-Informative region through rectangle detection of Hough transform and analysis of color histogram distribution.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.127-133
• /
• 2015

In order for location information to deliver the collected information, it needs Sensor Nodes in an environment of Sensor Network. Each sensor sends data to a base station through the process of routing in a wireless sensor network environment. Therefore, Offering accurate location information is very important in a wireless sensor network environment. Most of existed routing methods save all the informations of nodes at the area of 1-hop. In order to save these informations, unnecessary wasted energy and traffics are generated. Routing Protocol proposed in this paper doesn't save node's location information, and doesn't exchange any periodic location information to reduce wasted energy. It includes transmission range of source nodes and nodes with the location information, however it doesn't include any nodes' routing near 1-hope distance.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.171-179
• /
• 2016

The energy consumption problem in wireless sensor networks is investigated. The problem is to expend as little energy as possible receiving and transmitting data, because of constrained battery. In this paper, in order to extend the lifetime of the network, we proposed a location-based clustering algorithm for wireless sensor network with skewed-topology. The proposed algorithm is to deploy multiple child nodes at the sink to avoid bottleneck near the sink and to save energy. Proposed algorithm can reduce control traffic overhead by creating a dynamic cluster. We have evaluated the performance of our clustering algorithm through an analysis and a simulation. We compare our algorithm's performance to the best known centralized algorithm, and demonstrate that it achieves a good performance in terms of the life time.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.253-257
• /
• 2020

The local information processing devices are devices that process information by converting voltage, current, and digital electric signals from legacy-type power facility into IEC 61850 based data. It acquires and processes the operation information of legacy-type power facility, performs control of power facility, and interlock function using internal logic. In particular, the time to convert data to process input and output information for a device is important because a number of protection relay input and output signals are handled by only one device. This paper introduces test methods and cases for measuring IEC 61850 communication function and input/output data conversion time of local information processing device.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.195-202
• /
• 2017

Ortho images created by aerial photogrammetry have been used in large areas but they are uneconomical for small areas and continuous change observation. The drones have been developed for military purposes, and recently they are being used crop management and analysis, broadcast relay, meteorological observation and disaster investigation and so on. Also there were a lot of studies of expensive commercial drone. In this paper, lower price self-assembly drone usable for in small areas, Obtained images and produced Orthomosaic and DSM using mission planner which is a normal digital camera and open source program, and postprocessing was used Pix4d software. GCP errors are X-coordinate 3.4cm, Y-coordinate 2.4cm, Z-coordinate 4.2cm. It seems like the self-assembly drone can be used for various fields.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.809-819
• /
• 2000

This paper deals with an optimal capacity allocation problem and performance analysis in Advanced Information Communication Processing System(AICPS). AICPS is a gateway system interconnection PSTN(Public Switched Telephone Network), ISDN(Intergrated Services Digital Network), PSDN(Packet Switched Data Network), internet, Frame Relay and ATM together. This study considers not only ISDN and Internet but also user behavior of On-line service which is analyzed by Markov process. A call blocking probability of TNAS and INAS is computed by Erlang's formula. Then, PNAS and WNAS's call blocking probability are computed by Stochastic knapsack modeling. The result is compared with result of simulation. Finally, we allocate an optimal capacity minimizing total call blocking probability.

• Proceedings of the KIEE Conference
• /
• 2006.10b
• /
• pp.185-190
• /
• 2006

Frequency and phasor are the most important quantities in power system operation because they can reflect the whole power system situation. Frequency reflects the dynamic energy balance between load and generating power, while operators use phasor to constitute the state of system and, moreover, phasor based line relays are currently used in most power systems. So frequency and phasor are regarded as indices for the operating power systems in practice. The proposed technique is suitable for estimation near-nominal, nomina), and off-nominal frequencies. It is useful in designing microprocessor-based relays and meters that need to measure power system frequency. Performance test results, using signals from EMTP source and Excel program, indicate that the proposed technique can provide accurate estimates within 16ms. Maximum estimation errors observed during testing are of the order of 0.006Hz for nominal, near-nominal, and off-nominal frequencies. The proposed technique provides accurate estimates in presence of noise and harmonics and in case ground fault. The rate change of the phase angle is used for estimation. To confirm the validity of the proposed algorithm, the simulation studies carried out on a typical 154[KV] double T/L system by using EMTP software. Some test results are presented in the paper.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.34-36
• /
• 2006

In this paper, we will treat the diagnosis problem to accurately determine fault types. The judgement of fault types is accomplished by observing the cluster newly formed with faults and clustering the input current waveforms to intrinsically show the conditions with the dignet that is a clustering algorithm. The types of input current waveforms are, however, constrained during normal operation, though it considers the load character. In case of faults. new clusters are generated outside the clusters. which appear during normal operation, because the input current waveforms of the induction motor are generated by the type which is not observed in case of faults. The diagnosis about the types of faults is essential to building a fault tree about the induction motor, and it removes the causes of the faults using a fuzzy logic. We, first, constitute a fault tree, which connects with the parts and the entire system of the induction motor, and investigate fault modes which can be generated from the fault tree and the relationship of the cause and the effect of each part (of the motor). Also, we distinguish the faults of each part by means of inducing the said of fuzzy relation equations encapsulating the relationship of the fault modes and each part.