• Journal of Korean Society of Archives and Records Management
• /
• v.20 no.3
• /
• pp.1-21
• /
• 2020

Although the National Archives of Korea has been receiving transfer of standard electronic documents with a retention period of more than 30 years from the central administration since 2015, errors and inefficiencies persist. Despite this, however, there remain no studies that analyze or address these issues. This study aims to bridge this gap and found that most errors in the transfer process occur at the production stage. To address such, this study proposes a four-step solution. First, before electronic document approval, the text and attached files are checked for defects to prevent errors. Second, as soon as the signature is made, digital signatures are applied on a file-by-file basis to ensure integrity. Third, integrity verification and transfer inspection are automatically performed through digital signature investigation and defect check procedure during transfer and preservation. Fourth and last, the criteria of acquiring records and integrity guarantee technologies are properly applied in production stage with proper management and supervision.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.385-391
• /
• 2013

X-ray computed tomography is a very powerful nondestructive technique in safety inspection of historic timber building. But, in field, various testing condition makes it difficult to carry out X-ray CT testing. Limited size in X-ray digital detector is one of the problems. In this study, a pitch pine disk with two holes was used to know how imperfection in X-ray projection affects CT image resolution. Using various number of projections, CT image was reconstructed by filtered back projection method, and then it was investigated how many projection is required to identify the holes in different location. Two artificial holes could be differently detected according to their location in cross section of specimen. One hole in center part of specimen was identified using more than 9 radiographs, but the other one which located in outer part of cross section could not be detected until more than 36 projections were used. Even though there is data missing in outer part of cross section due to limited size of detector, the center part of CT image could be reconstructed well and the resolution of outer part became higher with increase of the number of projections. For field application, the number of projections for CT image reconstruction needs to be decided with consideration of another nondestructive testing and the location of interest.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.199-212
• /
• 2019

Digitalization is creating a variety of changes and innovations in our business environment. In manufacturing, robots have long been used for automation to innovate processing speed and quality. The RPA brings these innovations in manufacturing sites to the office space. The purpose of this study is to improve productivity for simple, repetitive tasks in these office space. For identify the potential of automation related to productivity improvement, I looked at the concept of business automation, and then simulated the five areas of business documentation works with agile methodology. In conclusion, I confirmed that productivity improvement of 97.3% in quality inspection and 31.7% in editorial design is possible, and examined the direction to apply to actual work. Based on these results, future study will explore the application of Intelligent Process Automation (IPA).

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.125-136
• /
• 2021

Recently, Unmanned Aerial Vehicle utilization and image processing technology for remote sensing have diversified remarkably with Orthophoto and Digital Surface Model. In particular, It uses more application fields such as spatial information analysis and hazardous areas as well as land surveying. This study analyses the accuracy of the coordinate on Orthophoto and DSM height on slope area with high and low differences by using UAV images. As the result of this study, in the case of GCP on 2D orthophoto, the location error was not produced significantly. The vertical position of the DSM showed the highest accuracy when the height difference between GCPs is under 30m(RMSEZ=0.07m). The location of the GCPs was divided into approximately 10m, 20m, 30m, and 40m with analysis for each of the eight points of GCP and inspection points in general. This study expects that producing both horizontal accuracy of Orthophoto and vertical accuracy of DSM using UAV on the sloped area which similar to this research area will help in spatial information fields.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.969-974
• /
• 2022

In order to maximize dynamic range and to minimize image lag in digital X-ray imaging, diminishing residual parasitic capacitance in photodiode in pixels is critically necessary. These requirements are more specifically requested in dynamic X-ray imaging with high frame rate and low image lag for industrial 2D/3D automated X-ray inspection and medical CT imaging. This study proposes duoPIX^TM X-ray imaging sensor for the first time that is composed of reset thin film transistor, readout thin film transistor and photodiode in a pixel. To verify duoPIX^TM X-ray imaging sensor, designing duoPIX^TM pixel and imaging sensor was executed first then X-ray imaging sensor with 105 ㎛ pixel pitch, 347 mm × 430 mm imaging area and 3300 × 4096 pixels (13.5M pixels) was fabricated and evaluated by using module tester and image viewer specifically for duoPIX^TM imaging sensor.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.74.3-74.3
• /
• 2015

We present 2D- photometric decompositions of ~1,200 nearby dwarf galaxies. Our representative sample is derived from 'A catalog of Visually classified galaxies in the Local Universe'(Ann, Seo and Ha APJS,,,2015) of which galaxy morphological types are determined by visual inspection of color images using the Sloan Digital Sky Survey data release 7. In this catalog, dwarf galaxies were divided into 5 subtypes : dS0, dE, dSph, dEbc, dEblue with distinction of the presence of nucleation in dE, dSph, and dS0. The dSph types are less brighter than other types, and galaxies with nuclei are slightly brighter than those with no nuclei in the same types. Sersic index n have a range 1~1.5, and $dE_{un}$ and $dSph_{un}$ galaxies have n less than 1, and $dSph_n$ galaxies have largest values. We performed two-dimensional decomposition of galaxies using GALFIT, and analyzed their structural components, and residual features which are seen in the residual image.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.153-157
• /
• 2008

Recently, electronic devices is produced by multilayer structure, therefore analysis for hidden layers is important nondestructive inspection. This paper presents visibility enhancement methods for the ultrasonic multiple echoes reflected from adhesive layer in the multilayers using digital signal processing. The reflected signals from the multilayers come out interval of the peaks in the power cepstrum. In the experiment, the adhesive layers of settled thickness using epoxy were formed. The reflected signals from the multilayer is detected by pulse-echo method and power cepstrum is processed for enhancement of visibility.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.6
• /
• pp.451-456
• /
• 1990

Underwater acoustic navigation and position fixing systems have been extensively used not only in surface position fixing but also in underwater position fixing. Tn recently, application of these systems has been in the field of underwater inspection of offshore platforms, where it is vital to track the position of an unmanned submersible or diver carrying underwater cameras and nondestructive testing equipment. But these systems are included the fixing errors as results of a signal with additive noise, the attenuation of sound and the interference effects due to multipath reflection and forward scattering. In this paper to improve the position fixing by the supershort baseline acoustic position system, a method to apply the Kalman filter to the fix of the system is proposed and the digital simulation under noise condition is conducted. The optimal positions by the Kalman filter are compared with original positions, and it is confirmed that the results of the pro-posed method are evidently more accurate.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.583-590
• /
• 2006

It is hard to inspect the state of lubrication of an automobile transmission visually. Thus, it is necessary to develop a new inspection method. Wear debris can be collected from the lubricants of an operating transmission of an automobile, and its morphology will be directly related to the friction condition of the interacting materials from which the wear debris originated in the lubricated transmission. In this study, wear debris in lubricating oil are extracted by membrane filter $(0.45{\mu}m)$, and the quantitative values of shape parameters of wear debris are calculated by digital image processing. These shape parameters are studied and identified by an artificial neural network algorithm. The results of the study may be applicable to the prediction and diagnosis of the operating condition of transmission gear.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.539-539
• /
• 2000

This paper shows how to implement force reflection for a needle insertion problem. The target is a needle spine biopsy simulator for tumor inspection by needle insertion. Simulated force is calculated from the relationship of volume graphic data and the orientation and Position of the needle, and it is generated using PHANTOM$^{TM}$. To generate realistic force reflection, the directional force of the needle has been generated by tissue model. The other rotational force is generated using a pivot to keep the needle in the initial inserted direction after puncturing the skin. Since the used haptic device has limitation for generating high stiffness and large damping, scale downed model and digital filter are used to stabilize the system.m.