• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.1
• /
• pp.51-64
• /
• 2008

In this paper, an experiment was done where the input(scanner, digital still camera) and monitor(CRT, LCD) device used the linear multiple regression and the GOG (Gain-Offset-Gamma) characterization model to perform a color transformation. Also to color conversion method of the digital printer it used the LUT(Look Up Table), 3dimension linear interpolation and a tetrahedron interpolation method. The results are as follows. From color reappearance of digital printing case of monitor, the XYZ which it converts in linear multiple regression of input device it multiplied the inverse matrix, and then it applies the inverse GOG model and after color converting the patch of the result most which showed color difference below 5 at monitor RGB value. Also, The XYZ which is transmitted from the case input device which is a printer it makes at LAB value to convert an extreme, when the LAB value which is converted calculating the CMY with the LUT and tetrahedral interpolations the color conversion which considers the black quantity was more accurate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.291-297
• /
• 1998

In order to accomplish the digital map production I/O devices should be used which are used for data input procedure to convert original paper map(hardcopy) data into computer compatible digital map data, and for the mapsheet output procedure of worked out data. For the input device, digitizer and scanner are most frequently used. Digitizer has possibility of direct production of digital data, and are mainly used for input procedure of partly plotted source map. In contrary, scanner is rather easy to operate the instrument, so that is widely used for the input procedure of original sheet map. In this study, to extract the input device characteristics, some kinds of digitizers and scanners were cheesed and used for the positional error analysis through the operational method and types of instruments. Also for the output device characteristics, some kinds of plotter and materials are used and compared to analyze the positional error through the instrumental types and output sheet materials.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.55-62
• /
• 2007

Purpose: Digital medical image commenced with an introduction of PACS has become more popular today in the radiation diagnosis and medical treatment and made great progress, in particular, for medical testing field, whereas it has made slow progress for radiation therapy area. In order to accommodate the current trend of digital from analog, a spherical type mechanical check device (SMCD) that is form of spherical differing from the existing form of flat or cube has been designed and tested its practicability to replace the part in mechanical check with digital image from QA operation. Materials and Methods: If the distance maintains constant between source(target) and image detector with constant distance to the center of spherical type mechanical check device(SMCD), the size will be shown as a constant image at all times regardless of its direction exposed. For the test, two accurate hemispheres are made and put together which results in a sphere of the equilateral circle. Results: It enables a variety of implementation of the existing mechanical check using digital image as follows: congruity level of radiation field and light field, size accuracy of radiation field and collimation field, gantry rotation isocenter check, collimation rotation isocenter check, room laser accuracy check, collimation rotation angle check, couch rotation angle check, and more. Conclusion: It has proved its practicability in checking isocenter congruity level as real time at the time of simultaneous rotation between gantry and couch that is applied to the non-coplanar field, which had been hard to apply as a device formed of existing flat or cube.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.252-260
• /
• 2019

Smart devices have penetrated deeply into our daily lives. They have not only increased user convenience, but also changed the overall lifestyle of society. The objective of this study was to examine the change process of user experience through device classification and technology by generation. In order to achieve the objective, this study analyzed the purpose and pattern of using a device, which is a digital platform, and the input and output, which are the most important digital components for personal exclusiveness and interaction. The analysis results of this study showed that, in the past, the purpose of using a device was clear, a device was used in common, and a separate device was used for input and output. However, as devices evolved, users began to emphasize the fun aspect than the purpose of a device. As a result, personal exclusiveness has increased. Moreover, unlike devices in the past depending on separate input or output methods, devices are evolving to employ a method performing input and output using the five senses of people such as the touchscreen using a body part of a user, voice, and motion. This study evaluated how the overall experience of users, which was obtained through technology, has changed for each generation. Furthermore, this study proposed the future direction of device development by considering the user experience. It is believed that the results of this study will be useful for future studies on the overall experience of users who will use a range of smart devices, which will be released in the future.

• The Magazine of the IEIE
• /
• v.42 no.7
• /
• pp.45-53
• /
• 2015

Power 소자 기술은 digital & mixed signal device와 on-chip 구현을 위해서 CMOS 공정에 대한 기본 이해가 필요하다. CMOS 공정 기반 위에 power device 공정을 추가하면서 다양한 operation voltage의 power 소자를 구현하고, passive device 들을 동일 공정에서 구현하여 다양한 components 들로 power IC 제품을 design 할 수 있도록 modular process를 제공하는 것이 중요하다. 또한 power device로 주로 사용되는 LDMOS 소자에 대한 performance 개선을 위해 simulation을 통해 key device parameter들의 특성을 예측하고, 구조를 설계하는 것이 Si process 전에 중요한 일 중의 하나이다. 아울러 power management가 potable power, consumer electronics 및 green energy에서 가장 빠르게 성장하는 분야이므로, 차별화된 power 소자 기술을 확보하여 급변하는 시장 환경에 대응하는 것이 필요하다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.459-460
• /
• 2010

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.498-503
• /
• 2005

As important device that decide output load in superannuated thermoelectric power plant which do Turbine Load Set Motor device. This generation of electric power system operated Set Up Range Motor according to Set Up value that operator manufactures by hand circumvolve, and generation of electric power output load derision is consisted by internal action including Motor Therefore, in this research passively output load operated Turbine Motor Drive equipment that can have existing Turbine Load Set Motor Performance developing Digital Drive Unit device design. Also control algorithm implementation and existing Turbine Load Set Motor Drive and connection possibility through designed controlling system to connect basis function that decide development output load with Digital Drive Unit that designed also with existing Motor Drive Unit and can be operated.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.19-25
• /
• 2015

In this time, as an industrial society developed to a welfare society, more and more people want their quality of lives upgraded and specially customized service by mass production/mass consumption. And it leads to an increase of requiring service. There're active developments and studies on various IT equipment as the requirement made IT devices used in service. In this paper, we try to design and realize radio paging DID by using smart device to be used as a receiver of a radio pager which is broadly used at face to face service. Firstly, we used MCU to design and implement Wireless Calling Gateway which change radio calling signal of ISM band to smart device. A receiver of wireless caller used original receiver module. Also it used bluetooth module to communicate with smart device. It was possible to have satisfactory communication since radio paging signal converter and smart device were linked in 3M. Secondly, to indicate various paging information delivered from a radio pager, we realized DID application program by using Smart PAD. As a result, we could indicate various information compared to an original receiver which only could indicate letters or numeric data. Secondly, we implemented the DID app for wireless calls that can display a variety of information sent from a wireless pager. Was implemented using the Smart Pad. As a result, it is shown that can display a variety of information than the existing receiver.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.3
• /
• pp.1-14
• /
• 2019

The 4th Industrial Revolution, intelligent automobile application technology is evolving beyond the limit of the mobile device to a variety of application software and multi-media collective technology with big data-based AI(artificial intelligence) technology. with the recent commercialization of 5G mobile communication service, artificial intelligent automobile technology, which is a fusion of automobile and IT technology, is evolving into more intelligent automobile service technology, and each multimedia platform service and application developed in such distributed environment is being developed Accordingly, application software technology developed with a single system SoC of a portable terminal device through various service technologies is absolutely required. In this paper, smart device design for ontology design of intelligent automobile open platform enables to design intelligent automobile middleware software design technology such as Android based SVC Codec and real time video and graphics processing that is not expressed in single ASIC application software technology as SoC based application designWe have experimented in smart device environment through researches, and newly designed service functions of various terminal devices provided as open platforms and application solutions in SoC environment and applied standardized interface analysis technique and proved this experiment.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.3
• /
• pp.29-36
• /
• 2019

With the rapid development of 5G technology, more and more network functions are interconnected and more popular. In order to effectively manage emerging network concepts, it allows any device object in the real world to be connected anywhere and at any time through the integration of device object recognition, interaction and raw data collection technologies. In addition, IP Multimedia Subsystem (IMS) is an architecture framework for transmitting IP-based information to the device object which can be represented as end user. Therefore, the Internet of Things and IP Multimedia Subsystem (IoT-IMS) communication platform can provide a convenient and fast way for user or device objects to deploy new application services effectively. In particular, in order to collect and manage the device information from IoT effectively in the IoT-IMS communication platform, an IoT Information Gateway (IIG) is proposed. Through the IoT Application Service (AS) scenario, the collected device information can be easily observed and managed in a unified way.