• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.210-217
• /
• 2008

In this paper, the performance of equalization-based on-channel repeater for terrestrial DMB is analyzed. A primary concern in on-channel repeater is the performance degradation due to the echo and one of key component for on-channel repeater is the echo canceller, which usually employs LMS algorithm utilizing the repeater output as a reference for echo channel estimation and compensation. One problem using LMS algorithm is the tracking capability and there necessarily exists residual echo that has not been cancelled. To effectivelyremove the residual echo, we consider an equalization based on-channel repeater where the echo-cancellor is followed by an equalizer that performs channel estimation using pilot symbol and the channel inversion utilizing homomorphic decomposition. According to the simulation result, the performance degradation caused by the residual echo can be considerably alleviated by using the equalizer following the echo-canceller.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.807-813
• /
• 2016

Recently, a spherical pendulum attached to an end-effector of a robot manipulator has been frequently used for a test bed of residual vibration suppression control in a multi-dimensional motion. However, there was no automatic tracking system to detect the current bob position on-line, and there was inconvenience to not be able to store the bob position in real time and plot the trajectory. In this study, we developed a two-dimensional, real-time bob-detecting system using a digital USB camera, of which the key is hardware component design and software C programming for fast image processing and interfacing. The developed system was applied to residual vibration suppression control of a two-dimensional spherical pendulum that is attached at the end-effector of a two degree-of-freedom SCARA robot, and the effectiveness of the developed system has been demonstrated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.18-26
• /
• 2001

In this paper, we propose an ATC(Automatic Transfer mode Controller) algorithm and an average-mode-change method for use in Gear shift PLL which can automatically change loop gain. The proposed ATC algorithm accurately detects proper timing or the mode change and has a very simpler structure - than the conventional lock detector algorithm often used in QPSK. And the proposed average mode change method can obtain low errors of estimated frequency offset by averaging the loop filter output of frequency component in shift register. These algorithms are also useful in designing ASIC, since these algorithms occupy small circuit area and are adaptable for high speed digital processing. We also present phase tracking performance of proposed Gear-shift PLL, which is composed of polarity decision PD, ATC and average mode change circuit, and analyze the results by examining constellation at each mode.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.81-89
• /
• 2007

The Viterbi decoder, which employs the maximum likelihood decoding method, is a critical component in forward error correction for digital communication system. However, lowering power consumption on the Viterbi decoder is a difficult task since the number of paths calculated equals the number of distinctive states of the decoder and the Viterbi decoder utilizes trace-back method. In this paper, we propose a method which minimizes the number of operations performed on the comparator, deployed in the SPEC-T Viterbi decoder implementation. The proposed comparator was applied to the ACSU(Add-Compare-Select Unit) and MPMSU(Minimum Path Metric Search Unit) modules on the decoder. The proposed ACS scheme and MPMS scheme shows reduced power consumption by 10.7% and 11.5% each, compared to the conventional schemes. When compared to the SPEC-T schemes, the proposed ACS and MPMS schemes show 6% and 1.5% less power consumption. In both of the above experiments, the threshold value of 26 was applied.

• Journal of Korean Society of Archives and Records Management
• /
• v.16 no.2
• /
• pp.29-55
• /
• 2016

Korean public organizations create electronic documents through electronic document management systems under the e-Government scheme. A majority of these public documents are saved in vendor-dependent file formats, mainly HWP. Vendor-dependent formats can be opened only with specific software, which requires purchase. As the license does not guarantee compatibility between past and future versions, interoperability problems occur in long-term preservation, which need to be solved. Any error from the elimination of styles or no matching elements in document definition during conversion from vendor-dependent formats to the XML-based standard exchange format leads to file open failure or the modification of original documents. This study introduces the Open Document Format (ODF) and investigates the effects of adopting ODF in the creation, exchange, management, and preservation of public records.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.735-746
• /
• 2001

As collaborative works have been spread over the internet, the need for information systems providing virtual workspaces has grown rapidly. Through virtual workspaces, the members participating in those collaborative works share and exchange their information effectively. It is desirable that these systems can be extended according to various requests of users, providing reliable services. In this paper, we describe a group of components for supporting collaboration and the iPlace (internet workPlace) system developed with those components. The iPlace system provides effective sharing and reusing of information among the members of collaborative groups through personal workspaces-the private spaces on the Web for each user and shared workspaces-the shared spaces for each of those groups. In addition, implemented with EJB technology, it provides highly scalable and reliable services.

• Journal of the Korean association of regional geographers
• /
• v.14 no.2
• /
• pp.114-125
• /
• 2008

Colored dissolved organic matter(CDOM) is an important component of ocean color that can be used as an invaluable tool in water quality and ocean color studies. With the largest source of coastal CDOM appearing to be from freshwater discharge into the ocean, coastal predictive models will do much to refine our knowledge about major processes that control CDOM distributions in coastal waters and provide a better insight into the global carbon cycle. This study aims at developing a GIS-based watershed-scale predictive model of CDOM distributions in Neponset river watersheds that can be used to appraise our understanding of CDOM sources and distributions in coastal waters and predict the response of CDOM concentration to changes in land use patterns. Weighting factors are developed for CDOM freshwater sources after extensive groundtruthing from various landuse types in the watershed. This model makes use of a publicly available DEM(Digital elevation model) as the base data for analysis. Stream networks, discharge, and land use data are used from public repositories while sub- watershed delineation, pour-points, and land use parcels are generated using Spatial Analysis of ArcGIS 9.2 to estimate the CDOM loading from various sources to the lower tributaries of rivers. The Neponset Watershed in eastern Massachusetts is selected as the site for development of the model.

• Broadcasting and Media Magazine
• /
• v.11 no.4
• /
• pp.118-131
• /
• 2006

With rapid development in ultra fast communication and digital multimedia, the realistic broadcasting technology, that can stimulate five human senses beyond the conventional audio-visual service is emerging as a new generation broadcasting technology. In this paper, we introduce a haptic broadcasting system and related core system and component techniques by which we can 'touch and feel' objects in an audio-visual scene. The system is composed of haptic media acquisition and creation, contents authoring, in the haptic broadcasting, the haptic media can be 3-D geometry, dynamic properties, haptic surface properties, movement, tactile information to enable active touch and manipulation and passive movement following and tactile effects. In the proposed system, active haptic exploration and manipulation of a 3-D mesh, active haptic exploration of depth video, passive kinesthetic interaction, and passive tactile interaction can be provided as potential haptic interaction scenarios and a home shopping, a movie with tactile effects, and conducting education scenarios are produced to show the feasibility of the proposed system.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1191-1193
• /
• 2003

Water quantity and quality monitoring at Taipei Watershed Management Bureau (WRATB) is not only a daily business but also a long term job. WRATB is responsible for providing high quality drinking water to about four millions population in Taipei. The quality of drinking water provided by WRATB is among one of the best in Taiwan. The total area is 717 square kilometers. The water resource pollution is usually divided into two categories, point source pollution and nonpoint source pollution. Garbage disposal is the most important component of the point source pollution, especially those by tourist during holidays and weekends. Pesticide pollution, fertilizer pollution, and natural pollution are the major contributions for nonpoint source pollution. The objective of this paper is to implement remote sensing, geographic information systems, and global positioning systems to monitor water quantity and water quality at WRATB. There are 12 water quality monitoring stations and four water gauge stations at WRATB. The coordinates of the 16 stations were determined by GPS devices and created into the base maps. MapObjects and visual BASIC were implemented to create application modules for water quality and quantity monitoring. Water quality of the two major watersheds at WRATB was put on Internet for public review monthly. The GIS software, ArcIMS, can put location maps and attributes of all 16 stations on Internet for general public review and technical implementations at WRATB. Inquiry and statistic charts automatic manipulations for the past 18 years are also available. Garbage disposal by community and tourist were also managed by GIS and GPS. The storage, collection, and transportation of garbage were reviewed by ArcMap file format. All garbage cart and garbage can at WRATB can be displayed on the base maps. Garbage disposal by tourist during holidays and weekends can be managed by a PDA with a GPS device and a digital camera. Man power allocation for tourist garbage disposal management can be done in an integration of GIS and GPS. Monitoring of water quality and quantity at WRATB can be done on Internet and by a PDA.

• Archives of Plastic Surgery
• /
• v.45 no.1
• /
• pp.58-61
• /
• 2018

Background Venous anastomosis is an important component of digital replantation, but is not always feasible, as some cases require external bleeding to treat venous congestion in the replanted tissue. In the present study, we evaluated the relationship between the number of vein anastomoses and the survival rate of Tamai zone I replantations. Methods A retrospective review was performed of all patients who underwent replantation of a fingertip amputation between 2014 and 2016. Patient charts were reviewed for demographic information, the mechanism of injury, the number of venous anastomoses, and the use of anticoagulation, external bleeding, and/or leeches. The cohort was divided into 3 groups depending on the number of venous anastomoses: no veins (group 1), a single vein (group 2), and 2 or more veins (group 3). Survival rates and external bleeding rates were analyzed across the groups. Results The review identified 143 fingertip replantations among 134 patients. The overall survival rate was 94% (135 of 143). Failures were due equally to venous complications (n=4, 50%) and to arterial complications (n=4, 50%). Our analysis did not identify any correlation between the number of veins anastomosed and the replant survival rate (P=0.689). However, a greater number of anastomoses was associated with a significantly lower frequency of external bleeding (P=0.017). Conclusions The number of venous anastomoses was not correlated with the survival rate. However, a greater number of venous anastomoses was associated with a decreased need for external bleeding, corresponding to a significant decrease in the need for postoperative monitoring and leech therapy.