• 제목/요약/키워드: digital communication system

검색결과 2,536건 처리시간 0.029초

Multiplierless Digital PID Controller Using FPGA

  • Chivapreecha, Sorawat;Ronnarongrit, Narison;Yimman, Surapan;Pradabpet, Chusit;Dejhan, Kobchai
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.758-761
    • /
    • 2004
  • This paper proposes a design and implementation of multiplierless digital PID (Proportional-Integral-Derivative) controller using FPGA (Field Programmable Gate Array) for controlling the speed of DC motor in digital system. The multiplierless PID structure is based on Distributed Arithmetic (DA). The DA is an efficient way to compute an inner product using partial products, each can be obtained by using look-up table. The PID controller is designed using MATLAB program to generate a set of coefficients associated with a desired controller characteristics. The controller coefficients are then included in VHDL (Very high speed integrated circuit Hardware Description Language) that implements the PID controller onto FPGA. MATLAB program is used to activate the PID controller, calculate and plot the time response of the control system. In addition, the hardware implementation uses VHDL and synthesis using FLEX10K Altera FPGA as target technology and use MAX+plusII program for overall development. Results in design are shown the speed performance and used area of FPGA. Finally, the experimental results can be shown when compared with the simulation results from MATLAB.

  • PDF

IMT-2000 전방궤환 디지털 적응 선형전력증폭기 설계 (Design of IMT-2000 Feedforward Digital Adaptive Linear Power Amplifier)

  • 김갑기;박계각
    • 한국항해항만학회지
    • /
    • 제26권3호
    • /
    • pp.295-302
    • /
    • 2002
  • 현재의 디지털 통신시스템은 매우 다양한 디지털 변조방식을 채택하고 있다. 이러한 통신시스템에서는 인접채널에 대한 간섭을 최대한 줄이기 위해서 필연적으로 선형 전력증폭기를 요한다. 선형 전력증폭기는 매우 다양한데 그 중에서 전방궤환 전력증폭기는 구조상 광대역이면서 선형화 정도가 매우 우수하다. 전방궤환 전력중폭기에 사용되는 지연선로의 손실로 인하여 전체효율이 감소한다. 본 논문에서는 이러한 지연선로를 손실이 매우 작은 지연필터를 사용함으로써 효율과 선형성을 동시에 개선하였다. 측정된 결과 ACLR이 약 17.43dB 개선되었으며 이것은 지연필터를 사용함으로써 2.54dB 더 개선되었음을 나타낸다.

디지털위성중계기용 SHF 대역 안테나 설계 및 구현에 대한 연구 (A Study on the Design and Implementation of SHF band Antenna for Digital Satellite Communication)

  • 김기중;한준용
    • 한국정보전자통신기술학회논문지
    • /
    • 제11권1호
    • /
    • pp.12-17
    • /
    • 2018
  • 본 연구는 디지털위성중계기용 SHF 대역 안테나의 설계 및 구현에 대해 기술하였다. SHF 대역 안테나는 반사판, Septom Polarizer, Feed Horn 및 지지대 등으로 구성된다. 제작 전 우주환경에 대한 사전 시뮬레이션 분석을 통하여 장비 오동작 가능성을 최소하였으며, 발사환경 시 발생하는 진동에 대한 시뮬레이션을 통해 신뢰성 있는 안테나를 설계하였으며, 제작 후 주요 성능지표에 대해 만족여부 확인 및 사전 성능 시뮬레이션 결과와 비교하였다. 안테나를 제작 후 안테나 주빔의 최대이득은 36.5dBi 로 요구조건인 35dBi 이상을 만족하며, 반사손실에 대해서도 최대 -24dB 이하로 요구조건 -20dB를 만족한다. 또한 안테나의 송수신 격리도에 대해서도 -22.6dB 이하로 요구조건 -20dB 이하를 만족한다. 본 논문에 기술한 위성 중계기용 안테나는 고신뢰성이 요구되는 정지궤도 및 저궤도 위성분야에 향후 활용이 가능하다.

Research on the Application of Fractal Geometry in Digital Arts

  • Xinyi Shan;Jeanhun Chung
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제15권2호
    • /
    • pp.175-180
    • /
    • 2023
  • Fractal geometry, a relatively new branch of mathematics, was first introduced by Benoit Mandelbrot in 1975. Since then, its applications have expanded into various fields of natural science. In fact, it has been recognized as one of the three significant scientific discoveries of the mid-20th century, along with the Dissipative System and Chaos Theory. With the help of fractal geometry, designers can create intricate and expressive artistic patterns, using the concept of self-similarity found in nature. The impact of fractal geometry on the digital art world is significant and its exploration could lead to new avenues for creativity and expression. This paper aims to explore and analyze the development and applications of fractal geometry in digital art design. It also aims to showcase the benefits of applying fractal geometry in art creation and paves the way for future research on sacred geometry.

방사선 검사 관련 의료장비와 PACS 간의 연동을 위한 DICOM 및 Non-DICOM 인터페이스 방안 (Methods of DICOM and Non-DICOM Interfacing for various Radiological Equipments with PACS)

  • 김현철
    • 대한디지털의료영상학회논문지
    • /
    • 제6권1호
    • /
    • pp.51-64
    • /
    • 2003
  • This thesis describes the effective interfacing methods of PACS Modality based on the system installation andoperating experiences. PACS(Picture Archiving and Communication Systems) is a system for medical image archiving and communication using large storage device and high-speed network. The standard communication protocol of PACS is DICOM(Digital Imaging and Communication in Medicine) based on TCP/IP and point-to-point protocol. However, there are many Non-DICOM Modalities and DICOM Modalities having problems. First, we had interfaced almost modalities. Fuji CR, GE CT, MRI, Angio, Fluoro, Phillips Angio, Shimadzu Fluoro. Ultrasound PACS, with the main PACS in the Seoul S Hospital as large scale hospital. And we manipulated the intelligent image distribution and the CT. MRI Interfaces never experienced beforein the Anyang J Hospital and the Chungju C Hospital as mid or small scale hospital. Technically, we developed both the DICOM Interface and the Non-DICOM Interface. At the last, the DICOM Worklist and the DICOM Print Interface were implemented in the Seoul B Hospital, the Bucheon SJ Hospital and the Seoul K Hospital independently with PACS. The Oracle, Sybase and MS-SQL are used as database, and UNIX, Macintosh, MS Windows as operating systems. And the Visual C++ and UNIX C are the main programming tools. We have used UTP, coaxial and fiber optic cable under 10/100 mbps LAN for networking.

  • PDF

방사선 검사 관련 의료장비와 PACS 간의 연동을 위한 DICOM 및 Non-DICOM 인터페이스 방안 (Methods of DICOM and Non-DICOM Interfacing for various Radiological Equipments with PACS)

  • 김현철
    • 대한디지털의료영상학회논문지
    • /
    • 제5권1호
    • /
    • pp.46-63
    • /
    • 2002
  • This thesis describes the effective interfacing methods of PACS Modality based on the system installation and operating experiences. PACS(Picture Archiving and Communication Systems) is a system for medical image archiving and communication using large storage device and high-speed network. The standard communication protocol of PACS is DICOM(Digital Imaging and Communication in Medicine) based on TCP/IP and point-to-point protocol. However, there are many Non-DICOM Modalities and DICOM Modalities having problems. First, we had interfaced almost modalities, Fuji CR, GE CT, MRI, Angio, Fluoro, Phillips Angio, Shimadzu Fluoro, Ultrasound PACS, with the main PACS in the Seoul S Hospital as large scale hospital. And we manipulated the intelligent image distribution and the CT, MRI Interfaces never experienced before in the Anyang J Hospital and the Chungju C Hospital as mid or small scale hospital. Technically, we developed both the DICOM Interface and the Non-DICOM Interface. At the last, the DICOM Worklist and the DICOM Print Interface were implemented in the Seoul B Hospital, the Bucheon SJ Hospital and the Seoul K Hospital independently with PACS. The Oracle, Sybase and MS-SQL are used as database, and UNIX, Macintosh, MS Windows as operating systems. And the Visual C++ and UNIX C are the main programming tools. We have used UTP, coaxial and fiber optic Gable under 10/100 mbps LAN for networking.

  • PDF

원자로 제어봉 구동장치 제어시스템용 전력제어기 FPGA 설계 (Design of FPGA in Power Control Unit for Control Rod Control System)

  • 이종무;신종렬;김춘경;박민국;권순만
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
    • /
    • pp.563-566
    • /
    • 2003
  • We have designed the power control unit which belongs to the power cabinet and controls the power supplied to Control Rod Drive Mechanism(CRDM) as a digital system based on Digital Signal Processor(DSP). The power control unit dualized as the form of Master/Slave has had its increased reality. The Central Process Unit(CPU) board of a power control unit possesses two Digital Signal Processors(DSPs) of the control DSP for performing the tasks of power control and system monitoring and the communication of the Control DSP and the Communication DSP. To accomplish the functions requested in the power control unit effectively, we have installed Field Programmable Gate Arrays(FPGAS) on the CPU board and have FPGAs perform the memory mapping, the generation of each chip selection signal, the giving and receiving of the signals between the power controllers dualized, the fault detection and the generation of the firing signals.

  • PDF

비대칭 위성 데이터 통신 시스템을 이용한 원격 진단 방사선 컨설팅 시스템 개발에 관한 연구 (A Study on the Development of Tele-Consulting System of Radiology using Asymetric Satellite Data Communication System)

  • 황선철;김용만;김희중;이명호
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1997년도 추계학술대회
    • /
    • pp.180-183
    • /
    • 1997
  • In this paper, we present the Tele-consulting system of radiology, which uses the communication network as asymetric satellite data communication system. The asymetric satellite data communication system uses receive-only satellite links or data delivery and PSTN(Public Switched Telephone Network) modem or N-ISDN(Integrate Services Digital Network) for communication. The satellite communication linking shows the very high-speed performance than 28.8kbps modem linking. The satellite linking is 5 - 10 times aster than the modem linking. Consequently, we get the conclusion that our system is suitable or tele-radiology and telemedicine.

  • PDF

고속 디지털 샘플러 기술을 이용한 저전력, 저복잡도의 초광대역 임펄스 무선 통신시스템 신호처리부 연구 (Study on signal processing techniques for low power and low complexity IR-UWB communication system using high speed digital sampler)

  • 이순우;박영진;김관호
    • 대한전자공학회논문지TC
    • /
    • 제43권12호
    • /
    • pp.9-15
    • /
    • 2006
  • 본 논문에서는 저전력, 저복잡도 시스템 구현이 가능한 noncoherent IR-UWB (Impulse-radio-based Ultra Wideband: IR-UWB) 무선 통신 시스템을 위한 신호처리부 기술을 제안한다. 제안된 시스템은 OOK(On Off Keying) 변복조 기법을 사용하며, 에너지 검출 기반으로 임펄스 신호를 복원하는 Noncoherent 방식을 사용한다. 특히, 극초단의 펄스 신호를 디지털 신호로 변환하기 위하여 상대적으로 낮은 기준 클럭을 이용하여 나노초 펄스를 검출해 내는 새로운 고속 디지털 샘플러 기술을 제안한다 또한, 데이터 프레임 송수신을 위하여 Turyn 코드를 사용하였으며, 에러 정정을 위하여 길쌈코드를 사용하였고, 수신부에서는 비터비 디코더를 사용하였다 제안된 Noncoherent IR-UWB 시스템의 신호처리부 검증을 위하여, 근거리 고음질의 MP3 데이터 전송 시스템을 설계하였다. 제안된 신호처리부 기술은 FPGA 레벨에서 실제 구현하였으며 각각의 기능 동작을 검증하였다.

호흡 검출 시스템을 위한 초소형 센서 인터페이스 회로 (Miniaturized Sensor Interface Circuit for Respiration Detection System)

  • Jo, Sung-Hun
    • 한국정보통신학회논문지
    • /
    • 제25권8호
    • /
    • pp.1130-1133
    • /
    • 2021
  • In this paper, a miniaturized sensor interface circuit for the respiration detection system is proposed. Respiratory diagnosis is one of the main ways to predict various diseases. The proposed system consists of respiration detection sensor, temperature sensor, and interface circuits. Electrochemical type gas sensor using solid electrolytes is adopted for respiration detection. Proposed system performs sensing, amplification, analog-to-digital conversion, digital signal processing, and i2c communication. And also proposed system has a small form factor and low-cost characteristics through optimization and miniaturization of the circuit structure. Moreover, technique for sensor degradation compensation is introduced to obtain high accuracy. The size of proposed system is about 1.36 cm2.