Hwang, Cheol Hong;Lee, Hyo Min;Oh, Jeong Seok;Hwang, Dong Hyeon;Hwang, Yu Seok;Lee, Jong Won;Choi, Jeong Mook;Park, Joon Sik
Journal of Powder Materials
/
v.28
no.5
/
pp.396-402
/
2021
Stainless steel, a type of steel used for high-temperature parts, may cause damage when exposed to high temperatures, requiring additional coatings. In particular, the Cr2O3 product layer is unstable at 1000℃ and higher temperatures; therefore, it is necessary to improve the oxidation resistance. In this study, an aluminide (Fe2Al5 and FeAl3) coating layer was formed on the surface of STS 630 specimens through Al diffusion coatings from 500℃ to 700℃ for up to 25 h. Because the coating layers of Fe2Al5 and FeAl3 could not withstand temperatures above 1200℃, an Al2O3 coating layer is deposited on the surface through static oxidation treatment at 500℃ for 10 h. To confirm the ablation resistance of the resulting coating layer, dynamic flame exposure tests were conducted at 1350℃ for 5-15 min. Excellent oxidation resistance is observed in the coated base material beneath the aluminide layer. The conditions of the flame tests and coating are discussed in terms of microstructural variations.
On the Transient Liquid Phase Bonding (TLPB) phenomenon with the MBF-50 insert metal at narrow gap (under 100), it takes long time for the bonding and the homogenizing. Typically, isothermal solidification is controlled by the diffusion of depressed element of B and Si. However, the amount of B and Si in the MBF-50 filler metal is large. This is reason of the long bonding time. Also, the MBF-50 filler metal did not contained Al and Ti which are ${\gamma}^{\prime}$ phases former. This is reason of the long homogenizing time. From the bonding phenomenon with the MBF-50 insert metal, we search main factors on the bonding mechanism and select several insert-metals for using the wide-gap TLPB. New insert-metals contained Al and Ti which are ${\gamma}^{\prime}$ phases former and decrease the B then the MBF-50. When the new insert-metal was used on the TLPB, the bonding time was decreased about 1/10 times and homogenizing heat treatment was no needed. In spite of the without homogenizing, the volume fraction of ${\gamma}^{\prime}$ phases in the boned interlayer was equal to homogenizing heat treated specimen which was TLPB with the MBF-50. Finally, the new insert metal named WG1 for the wide-gap TLPB is more efficient then the MBF-50 filler metal without decreasing the bonding characteristic.
Objectives This study was conducted to confirm the possibility of Clostridium difficile infection (CDI) treatment through natural herbal medicines. Methods After screening a total of 77 herbal medicines through the paper disc agar diffusion method, we selected the herbal medicines that showed a effectiveness compared to the positive control vancomycin. Afterwards, drugs that showed inhibitory effects compared to C. difficile without inhibition of Bifidobacterium bifidum and Lactobacillus plantarum, known as beneficial bacteria, were selected and minimal inhibitory concentration (MIC) was confirmed by applying the Broth microdilution method. Results The Coptidis Rhizoma, well known for its antimicrobial effect, was found to have antimicrobial effects on C. difficile, but also had inhibitory effects on the beneficial bacterium B. bifidum. 30% ethanol extraction Crataegi fructus, Corni fructus and Mume fructus had antimicrobial effects on C. difficile without inhibiting the beneficial bacteria B. bifidum and L. plantarum. The MIC values of 30% ethanol extraction Crataegi fructus, Corni fructus and Mume fructus were found to be 10 mg/mL, 20 mg/mL and 5 mg/mL, respectively. Conclusions Crataegi fructus, Corni fructus and Mume fructus were identified as candidate medicines for C. difficile. Further researchs will need to be done in vivo, and to find an optimal extraction method accompanied by economic evaluation.
An 8 month old leopard gecko (Eublepharis macularius) with a large nodule was referred to our hospital. During the physical examination, the nodule had an unclear boundary from the top of the left eye to the front of the left ear and prevented the opening of the left eye. A hard, cheese-like, yellow, pus-filled nodule was observed. A cytological examination of a pus swab sample revealed pyogranulomatous inflammation with rod-shaped bacteria. Ofloxacin was chosen as the empirical topical antimicrobial drug for treatment. The swab samples were inoculated in trypticase soy agar with 5% sheep blood and incubated at 37℃ for 24 h. Gram-negative bacteria were identified via Gram staining, and the Kirby-Bauer antimicrobial susceptible disk diffusion test against 24 antibiotics according to protocol M100-Ed32 of CLSI showed that the fluoroquinolone group (ciprofloxacin and enrofloxacin) was susceptible to the isolated bacteria. Molecular identification based on 16S ribosomal RNA gene sequencing confirmed that the isolated bacteria had a 99.85% nucleotide similarity with Serratia surfactantfaciens (GenBank accession no. CP014948). After 1 week, the boundaries of the nodule became clear; thus, the abscess was physically removed by expanding the hole formed above the eye for drainage, and flushing was repeated. After another 1 week, new tissue restoration without scarring was observed. This is a rare case report of the successful management of a subcutaneous abscess and scar-free healing in a lizard.
The objective of this study was to evaluate in vitro antimicrobial and anti-biofilm activity of sodium long chain polyphosphate (SLCPP) and effect of dietary supplementation of SLCPP on growth performance, organ characteristics, blood metabolites, and intestinal microflora of broilers. Antimicrobial activities of SLCPP were observed against Escherichia coli O157:H7, Listeria monocytogenes, Salmonella enterica ser. Pullorum, Shigella sonnei, Klebsiella pneumonia, Pseudomonas aeruginosa in agar well diffusion assay. In addition, SLCPP demonstrated good anti-biofilm activity against K. pneumonia and P. aeruginosa. Furthermore, to investigate the dietary effect of SLCPP, a total of 480 1-day-old male Ross 308 broiler chicks were randomly allotted to three dietary treatment groups (4 replicates per group, 40 birds in each replicate): an antibiotic-free corn-soybean meal basal diet (NC); basal diet + enramycin 0.01% (PC); and basal diet + 0.1% SLCPP (SPP). The experiment lasted for 35 days. Results showed that birds fed with SLCPP had higher body weight (BW) and average daily gain (ADG), and lower feed conversion ratio (FCR) during the grower phase (days 7 to 21) (p < 0.05). Except for blood urea nitrogen, all other blood biochemical parameters remained unaffected by the dietary supplementation of SLCPP. Compared to the control group, lengths of the duodenum and ileum in the SPP group were significantly shorter (p < 0.05). Moreover, counts of lactic acid bacteria (LAB), total aerobes, and Streptococcus spp. in jejunum as well as LAB in cecum were increased in the SPP group than in the PC group (p < 0.05). These results suggest that dietary supplementation of SLCPP might promote the growth of broilers in their early growth phase.
Objectives : The purpose of the study is to test the antibacterial, anti-inflammatory and antioxidant effects of BPH, which is composed of Pini Densiflorae Nodi Lignum and Querci Acutissimae Fructus, Angelicae Gigantis Radix, Cnidii Rhizoma, Angelicae Dahuricae Radix, Angelicae Tenuissimae Radix. Method : Antibacterial and anti-inflammatory effects of BPH on Propionibacterium acnes, one of anaerobic bacteria species were evaluated by measuring the levels of 2,2-diphenyl-1-picrylhydrazyl (DPPH) elimination and lipid peroxidation. Result : When BPH was applied to CCD-986sk (Human normal fibroblast) to confirm the level of cytokine(tumor necrosis factor-alpha, interleukin-8), its level increased in proportion to that of BPH's concentration, which indicated dose-dependent relationship. Using the Disk diffusion to measure the bacterial growth inhibition zone varying BPH concentration, it was found that the antibacterial effect of BPH was less than that of erythromycin, the control group, but was higher than that of saline, and it increased with higher concentrations. In a liquid culture medium containing BPH, the growth rate of Propionibacterium acnes was decreased by more than 10% at 25% BPH. After adding P. acnes to THP-1 monocyte, and treated it with BPH, and measuring the concentration of TNF-a and IL-8, it was observed that the amount of TNF-alpha and IL-8 significantly decreased depending on the level of BPH concentration. The ability to eliminate DPPH increased with higher BPH concentration. The inhibition of lipid peroxidation was increased by BHT treatment in a dose-dependent manner. Conclusion : Using Propionibacterium acnes, an anaerobic bacteria, we confirmed that BPH has antibacterial, anti-inflammatory and antioxidant effects.
Raza, Syed Abbas;Karim, Muhammad Ramzan Abdul;Shehbaz, Tauheed;Taimoor, Aqeel Ahmad;Ali, Rashid;Khan, Muhammad Imran
Journal of Electrochemical Science and Technology
/
v.13
no.2
/
pp.213-226
/
2022
In the present study, the corrosion behavior of aluminum Al-7075 tempered (T-6 condition) alloy was evaluated by immersion testing and electrochemical testing in 1.75% and 3.5% NaCl environment at acidic, neutral and basic pH. The data obtained by both immersion tests and electrochemical corrosion tests (potentiodynamic polarization and electrochemical impedance spectroscopy tests) present that the corrosion rate of the alloy specimens is minimum for the pH=7 condition of the solution due to the formation of dense and well adherent thin protective oxide layer. Whereas the solutions with acidic and alkaline pH cause shift in the corrosion behavior of aluminum alloy to more active domains aggravated by the constant flux of acidic and alkaline ions (Cl- and OH-) in the media which anodically dissolve the Al matrix in comparison to precipitated intermetallic phases (cathodic in nature) formed due to T6 treatment. Consequently, the pitting behavior of the alloy, as observed by cyclic polarization tests, shifts to more active regions when pH of the solutions changes from neutral to alkaline environment due to localized dissolution of the matrix in alkaline environment that ingress by diffusion through the pores in the oxide film. Microscopic analysis also strengthens the results obtained by immersion corrosion testing and electrochemical corrosion testing as the study examines the corrosion behavior of this alloy under a systematic evaluation in marine environment.
The updated version of Global Ocean Data Assimilation and Prediction System (GODAPS) in the NIMS/KMA (National Institute of Meteorological Sciences/Korea Meteorological Administration), which has been in operation since December 2021, is being introduced. This technical note on GODAPS2 describes main progress and updates to the previous version of GODAPS, a software tool for the operating system, and its improvements. GODAPS2 is based on Forecasting Ocean Assimilation Model (FOAM) vn14.1, instead of previous version, FOAM vn13. The southern limit of the model domain has been extended from 77°S to 85°S, allowing the modelling of the circulation under ice shelves in Antarctica. The adoption of non-linear free surface and variable volume layers, the update of vertical mixing parameterization, and the adjustment of isopycnal diffusion coefficient for the ocean model decrease the model biases. For the sea-ice model, four vertical ice layers and an additional snow layer on top of the ice layers are being used instead of previous single ice and snow layers. The changes for data assimilation include the updated treatment for background error covariance, a newly added bias scheme combined with observation bias, the application of a new bias correction for sea level anomaly, an extension of the assimilation window from 1 day to 2 days, and separate assimilations for ocean and sea-ice. For comparison, we present the difference between GODAPS and GODAPS2. The verification results show that GODAPS2 yields an overall improved simulation compared to GODAPS.
A newly proposed grouting simulation method, the sequential diffusion solidification method was introduced into the numerical simulation of combined bi-borehole grouting. The traditional, critical and difficult numerical problem for the temporal and spatial variation simulation of the slurry is solved. Thus, numerical simulation of grouting and blocking of flowing water in karst conduits is realized and the mechanism understanding of the combined bi-borehole technology is promoted. The sensitivity analysis of the influence factors of combined bi-borehole grouting was investigated. Through orthogonal experiment, the influences of proximal and distal slurry properties, the initial flow velocity of the conduit and the proximal and distal slurry injection rate on the blocking efficiency are compared. The velocity variation, pressure variation and slurry deposition phenomenon were monitored, and the flow field characteristics and slurry outflow behavior were analyzed. The interaction mechanism between the proximal and distal slurries in the combined bi-borehole grouting is revealed. The results show that, under the orthogonal experiment conditions, the slurry injection rate has the greatest impact on blocking. With a constant slurry injection rate, the blocking efficiency can be increased by more than 30% when using slurry with weak time-dependent viscosity behavior in the distal borehole and slurry with strong time-dependent viscosity behavior in the proximal borehole respectively. According to the results of numerical simulation, the grouting scheme of "intercept the flow from the proximal borehole by quick-setting slurry, and grout cement slurry from the distal borehole" is put forward and successfully applied to the water inflow treatment project of China Resources Cement (Pingnan) Limestone Mine.
BACKGROUND: Although antibiotics have contributed to treatment of bacterial infection, the antibiotic abuse can lead to antibiotic resistant bacteria. Impact of human activities on distribution of antibiotic resistance has been intensively issued and occurrence of antibiotic resistant bacteria in contaminated environments would not be a surprise. Nonetheless, anthropogenic contamination with the dissemination of antibiotic resistance along uncontaminated environments has been less considered. The aim of this study is to investigate antibiotic resistant bacteria across Ulleungdo, known as antibiotic resistance free and anthropogenic pollution free environment in Rep. of Korea. METHODS AND RESULTS: Antibiotic resistant bacteria in coastal seawater of Ulleungdo were investigated in July 2021. Antibiotic susceptibility test using the disk diffusion method was applied with six drugs according to the Clinical and Laboratory Standards Institute (CLSI) guideline. Total 43 bacterial isolates were tested and 20 isolates among of them showed multidrug resistance. Particularly, the number and ratio of resistant bacteria were relatively high in a densely populated area of Ulleungdo. The bacterial communities were investigated using 16S rRNA gene metabarcoding approach in the coastal seawater and soils of Ulleungdo. In the bacterial communities, Firmicutes were selectively distributed only in seawater, suggesting the possibility of anthropogenic contamination in coastal seawater of Ulleungdo. CONCLUSION(S): We found antibiotic resistant bacteria in a populated area of Ulleungdo. The occurrence of antibiotic resistant bacteria in Ulleungdo seems to result from the recent anthropogenic impact. Consistent monitoring of antibiotic resistant bacteria in the uncontaminated environment needs to considered for future risk assessment of antibiotics.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.