• 제목/요약/키워드: diffusion control reaction

검색결과 70건 처리시간 0.028초

Effect of CrN barrier on fuel-clad chemical interaction

  • Kim, Dongkyu;Lee, Kangsoo;Yoon, Young Soo
    • Nuclear Engineering and Technology
    • /
    • 제50권5호
    • /
    • pp.724-730
    • /
    • 2018
  • Chromium and chromium nitride were selected as potential barriers to prevent fuel-clad chemical interaction (FCCI) between the cladding and the fuel material. In this study, ferritic/martensitic HT-9 steel and misch metal were used to simulate the reaction between the cladding and fuel fission product, respectively. Radio frequency magnetron sputtering was used to deposit Cr and CrN films onto the cladding, and the gas flow rates of argon and nitrogen were fixed at certain values for each sample to control the deposition rate and the crystal structure of the films. The samples were heated for 24 h at 933 K through the diffusion couple test, and considerable amount of interdiffusion (max. thickness: $550{\mu}m$) occurred at the interface between HT-9 and misch metal when the argon and nitrogen were used individually. The elemental contents of misch metal were detected at the HT-9 through energy dispersive X-ray spectroscopy due to the interdiffusion. However, the specimens that were sputtered by mixed gases (Ar and $N_2$) exhibited excellent resistance to FCCI. The thickness of these CrN films were only $4{\mu}m$, but these films effectively prevented the FCCI due to their high adhesion strength (frictional force ${\geq}1,200{\mu}m$) and dense columnar microstructures.

Numerical Study on NO Emission with Flue Gas Dilution in Air and Fuel Sides

  • Cho Eun-Seong;Chung Suk Ho
    • Journal of Mechanical Science and Technology
    • /
    • 제19권6호
    • /
    • pp.1358-1365
    • /
    • 2005
  • Flue gas recirculation (FGR) is widely adopted to control NO emission in combustion systems. Recirculated flue gas decreases flame temperature and reaction rate, resulting in the decrease in thermal NO production. Recently, it has been demonstrated that the recirculated flue gas in fuel stream, that is, the fuel induced recirculation (FIR), could enhance much improved reduction in NO per unit mass of recirculated gas, as compared to conventional FGR in air. In the present study, the effect of dilution methods in air and fuel sides on NO reduction has been investigated numerically by using $N_2$ and $CO_2$ as diluent gases to simulate flue gases. Counterflow diffusion flames were studied in conjunction with the laminar flamelet model of turbulent flames. Results showed that $CO_2$ dilution was more effective in NO reduction because of large temperature drop due to the larger specific heat of $CO_2$ compared to $N_2$. Fuel dilution was more effective in reducing NO emission than air dilution when the same recirculation ratio of dilution gas was used by the increase in the nozzle exit velocity, thereby the stretch rate, with dilution gas added to fuel side.

Diels-Alder Cycloaddition of Cyclopentadiene with Ethylacrylate Catalyzed by Mesoporous Al-MCM-48 and Al-MCM-41 Catalysts

  • Shon, Jeong-Kuk;Sim, Jae-Yi;Thakur, Santosh Singh;Ko, Eun-Mi;Kong, Soo-Sung;Choi, Ji-Yun;Kang, Min;Senapati, Bidyut Kumar;Choi, Doo-Seoung;Ryu, Do-Hyun;Kim, Ji-Man
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권10호
    • /
    • pp.1993-1997
    • /
    • 2008
  • In the present work, Diels-Alder reaction of cyclopentadiene with ethylacrylate has been carried out by using two types of mesoporous solid acid catalysts (Al-MCM-41, Al-MCM-48) with different pore structures. The specific topology of Al-MCM-48 (cubic Ia3d structure composed of two independent 3-D channel systems) exhibit higher activity and stereo-control than those of Al-MCM-41 (hexagonal packing of 1-D channels). The physical properties of Al-MCM-48 catalyst, such as high accessibility of reactants to the acid sites, spatial confinement in the nanoscopic reactors, and 3-D channel network structure that are effective adsorption and diffusion of reactants, play a crucial role in the present study.

Quercetin과 Rutin의 피부 흡수 증진을 위한 셀룰로오스 다공성 하이드로젤 제형 개발 (Development of Porous Cellulose-Hydrogel System for Enhanced Transdermal Delivery of Quercetin and Rutin)

  • 이민혜;김수지;박수남
    • 폴리머
    • /
    • 제37권3호
    • /
    • pp.347-355
    • /
    • 2013
  • 본 연구에서는 항산화제인 quercetin과 그 배당체인 rutin의 피부 흡수를 증진시키기 위한 전달체로 다공성 셀룰로오스 하이드로젤을 제조하였고 그 특성을 연구하였다. Quercetin과 rutin을 위한 최적의 하이드로젤을 가교제인 12% epichlorohydrin(ECH)과 2% 셀룰로오스를 반응용액으로 하여 만들었다. 플라보노이드 함유 하이드로젤의 방출 실험에서, quercetin의 방출은 $10{\sim}500{\mu}M$ 농도에서 확산 속도에 영향을 받았으나, rutin의 경우는 비교적 낮은 농도($10{\sim}50{\mu}M$)에서 하이드로젤의 침식에 의한 방출이 지배적이었다. 플라보노이드에 대한 하이드로젤의 포집효율과 방출량은 quercetin보다도 rutin에서 모두 크게 나타났다. 하지만, Franz diffusion cell을 이용한 피부 투과 실험에서 quercetin이 rutin보다 1.2배나 더 큰 피부 투과능을 나타냈다. 플라보노이드 함유 하이드로젤은 대조군인 20% 1,3-butylene glycol phosphate buffer에서보다도 더 큰 경피 투과능을 나타내었다. 이 결과들은 난용성 항산화제인 플라보노이드의 피부 흡수 증진 전달체로서 셀룰로오스 다공성 하이드로젤이 이용 가능성이 있음을 시사한다.

1년 양생 조건의 Fly Ash를 혼입한 고성능 콘크리트의 시간의존적 염해저항성 평가 (Evaluation of Time-Dependent Chloride Resistance in HPC Containing Fly Ash Cured for 1 Year)

  • 윤용식;권성준
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권4호
    • /
    • pp.52-59
    • /
    • 2018
  • 철근콘크리트 구조물의 대표적인 열화현상인 염해를 억제하고자 여러 가지 연구가 진행되었는데, 그 중에서 혼화재료를 콘크리트에 혼입하여 사용하는 방법이 대표적으로 알려져 있다. 본 연구에서는 대표적인 콘크리트 혼화재료인 플라이애시를 혼입한 콘크리트와 OPC 콘크리트에 대하여 3가지 수준의 물-결합재비(37%, 42%, 47%)를 고려해 내구성능 평가를 실시하였다. 각 목표 재령일에서 Tang's method에 준하여 촉진 염화물 확산계수 측정 실험을, ASTM C 1202에 준하여 통과전하량 측정 실험을, KS F 2405에 준하여 압축강도 실험을 실시하였다. 또한, 기존의 연구결과인 재령 28일의 실험결과를 참고하여 확산계수에 대한 시간의존성지수(m)를 도출하여 고찰하였으며, 장기재령의 압축강도와 시간의존성지수 간의 상관관계를 평가하였다. 재령 49일부터 플라이애시 혼입 콘크리트에서 OPC 콘크리트 대비 개선된 염해저항성능을 나타내었으며 이는 포졸란 반응에 의해 생성된 불용성의 수화물이 원인으로 사료된다. 플라이애시 혼입 콘크리트에서 OPC 콘크리트 대비 약 1.5배 높은 시간의존성지수를 나타내었으며, 압축강도와의 상관관계 평가 결과, OPC 콘크리트는 압축강도가 증가할수록 선형적으로 시간의존성지수가 증가하는 경향을, 플라이애시 콘크리트는 압축강도가 증가할수록 선형적으로 시간의존성지수가 약간 감소하는 경향을 나타냈다.

MgO/Al2O3가 소결조제로 첨가된 Si3N4 세라믹스의 수열 조건에서의 부식열화 거동 (Corrosive Degradation of MgO/Al2O3-Added Si3N4 Ceramics under a Hydrothermal Condition)

  • 김원주;강석민;박지연
    • 한국재료학회지
    • /
    • 제17권7호
    • /
    • pp.366-370
    • /
    • 2007
  • Silicon nitride ($Si_3N_4$) ceramics have been considered for various components of nuclear power plants such as the mechanical seal of a reactor coolant pump (RCP), the guide roller for a control rod drive mechanism (CRDM), and a seal support, etc. Corrosion behavior of $Si_3N_4$ ceramics in a high-temperature and high-pressure water must be elucidated before they can be considered as components for nuclear power plants. In this study, the corrosion behaviors of $Si_3N_4$ ceramics containing MgO and $Al_2O_3$ as sintering aids were investigated at a hydrothermal condition ($300^{\circ}C$, 9.0 MPa) in pure water and 35 ppm LiOH solution. The corrosion reactions were controlled by a diffusion of the reactive species and/or products through the corroded layer. The grain-boundary phase was preferentially corroded in pure water whereas the $Si_3N_4$ grain seemed to be corroded at a similar rate to the grain-boundary phase in LiOH solution. Flexural strengths of the $Si_3N_4$ ceramics were significantly degraded due to the corrosion reaction. Results of this study imply that a variation of the sintering aids and/or a control (e.g., crystallization) of the grain-boundary phase are necessary to increase the corrosion resistance of $Si_3N_4$ ceramics in a high-temperature water.

전기 이중층 커패시터를 위한 다공성 탄소나노섬유의 메조 기공 제어 효과 (Mesoporous Control Effect of Porous Carbon Nanofibers for Electrical Double-Layer Capacitors)

  • 조현기;신동요;안효진
    • 한국재료학회지
    • /
    • 제29권3호
    • /
    • pp.167-174
    • /
    • 2019
  • To improve the performance of carbon nanofibers as electrode material in electrical double-layer capacitors (EDLCs), we prepare three types of samples with different pore control by electrospinning. The speciments display different surface structures, melting behavior, and electrochemical performance according to the process. Carbon nanofibers with two complex treatment processes show improved performance over the other samples. The mesoporous carbon nanofibers (sample C), which have the optimal conditions, have a high sepecific surface area of $696m^2g^{-1}$, a high average pore diameter of 6.28 nm, and a high mesopore volume ratio of 87.1%. In addition, the electrochemical properties have a high specific capacitance of $110.1F\;g^{-1}$ at a current density of $0.1A\;g^{-1}$ and an excellent cycling stability of 84.8% after 3,000 cycles at a current density of $0.1A\;g^{-1}$. Thus, we explain the improved electrochemical performance by the higher reaction area due to an increased surface area and a faster diffusion path due to the increased volume fraction of the mesopores. Consequently, the mesoporous carbon nanofibers are demonstrated to be a very promising material for use as electrode materials of high-performance EDLCs.

혼합전도체 LSCF(La0.6Sr0.4Co0.2Fe0.8O3) 양극의 기공률에 따른 양극분극 특성 (Effect of Cathode Porosity on the Cathodic Polarization Behavior of Mixed Conducting LSCF(La0.6Sr0.4Co0.2Fe0.8O3))

  • 윤중철;이종호;김주선;이해원;김병호
    • 한국세라믹학회지
    • /
    • 제42권4호
    • /
    • pp.251-259
    • /
    • 2005
  • 혼합전도체 산화물, LSCF의 전극반응점 분포에 따른 분극현상을 관찰하기 위해 다공성 양극의 기공률을 변화시켜가며 분극특성을 관찰하였다. 전극의 기공률을 달리하기 위해 크기가 다른 두 종류의 LSCF 분말들을 혼합비를 달리하여 사용하였으며 GDC 전해질 기판에 스크린 인쇄법을 통해 전극을 구성한 후 반쪽전지 실험을 수행하였다. 제조된 후막전극의 기공률은 화상 분석법을 통해 측정하였으며 전극의 전체 비표면적을 유추하기 위해 2차원 이미지에서의 기공의 둘레 길이를 측정하였다. 교류 임피던스법을 이용해 분극 특성을 관찰한 결과 혼합전도체인 LSCF 양극에서의 전극반응은 i) 양극표면에서 이온화된 산소이온이 전해질과의 삼상계면까지 이동해 오는 단계, ii) 이동해온 산소이온이 양극으로부터 전해질로 전달되는 반응단계에 의해 제어됨을 알 수 있었다. 이러한 양극에서의 분극은 기공률의 증가에 따라 전극 반응에 필요한 활성 표면이 증가됨으로써 줄어드는 것을 알 수 있었다.

세균 배양액과 반응한 Lactobacillus plantarum의 생장속도 및 항균 활성에 대한 연구 (Growth Rate and Antimicrobial Activity of Lactobacillus plantarum Reacting with Bacterial Culture Supernatant)

  • 하은미
    • 한국미생물·생명공학회지
    • /
    • 제43권3호
    • /
    • pp.187-194
    • /
    • 2015
  • 인간의 위장관은 매우 복잡한 장내균총으로 이루어져 있으며, 장내균총은 인간의 생리 기능에 있어 매우 중요한 역할을 담당하고 있다. 특히 유아기의 장내균총의 불균형은 면역연관 질병을 일으키는 요인이며 치료 목적으로 probiotics가 유용하게 활용되고 있다. Probiotics의 대표 균종은 L. plantarum으로서 영유아기에 병원균보다 가장 먼저 정착해야 면역 질환을 예방할 수 있다. 그러나 아직 Lactobacillus가 장의 우점종으로 정착하기 위한 환경적 요인과 항생물질분비 조절에 대한 이해는 부족한 실정이다.

ESS (에너지 저장장치) 배터리 화재사례를 통한 감식기법 및 연소 확산방지에 관한 연구 (A Study on the Identification Technique and Prevention of Combustion Diffusion through ESS (Energy Storage System) Battery Fire Case)

  • 이정일
    • 한국재난정보학회 논문집
    • /
    • 제16권2호
    • /
    • pp.383-391
    • /
    • 2020
  • 연구목적 : 에너지 저장실의 외부 화염에 의한 내부자기 점화 및 점화를 식별하고, 과열로 인한 점화와 외부 열원에 의한 점화의 차이를 분석하는 것이다. 연구방법 : 분리막 녹는점 측정, 배터리 외부 수열 실험, 배터리 과충전 실험, 과충전과 외부수열에 의한 연소 시 전극 판 비교분석, 과충전 연소 특징, 외부수열 화재 연소특징, 3.4(전극판 비교)/ 3.5(과충전)/ 3.6(외부수열) 분석 실험을 하였다. 연구결과: 화재 발생 시까지 센서의 위치에 따른 온도 차이가 극심했음으로 기존처럼 한 모듈 당 온도 센서 두 개로는 측정값이 부족해 온도제어를 통한 화재를 사전에 방지할 수 없다고 판단한다. 결론: 단락이 점화원으로 작용하여 혼합가스에 착화돼 가스폭발이 발생하고, 폭발 압력에 의해 전극이 잘게 파손되며, 가루형태의 리튬산화물이 불꽃반응에 의해 폭죽과 유사한 불꽃이 분출되었다.