• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.470-475
• /
• 2016

In this study, $Zn_xMn_{3-x}O_4$ (x=0.95~1.20) specimens were prepared by using a conventional mixed oxide method. All specimens were sintered in air at $1,200^{\circ}C$ for 12 h and cooled at a rate of $2^{\circ}C/min$ to $800^{\circ}C$, subsequently quenching to room temperature. We investigated the structural and electrical properties of $Zn_xMn_{3-x}O_4$ specimens with variation of ZnO amount for the application of NTC thermistors. As results of X-ray diffraction patterns, all specimens showed the formation of a complete solid solution with tetragonal spinel phase. And, the second phase was observed by the solubility limit of Zn ions in $x{\geq}1.10$ composition. The average grain size was increased from $2.72{\mu}m$ to $4.18{\mu}m$ with increasing the compositional ratio of Zn ion from x=0.95 to 1.20, respectively. $Zn_{1.10}Mn_{1.90}O_4$ specimen showed the minimum electrical resistance of $57.5k{\Omega}$ at room temperature and activation energy of 0.392 eV.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.111-115
• /
• 2014

X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM) were used to investigate the influence of Ni ions on the structural, electronic, and magnetic properties of nickel-ferrites ($Ni_xFe_{3-x}O_4$). Spinel $Ni_xFe_{3-x}O_4$ ($x{\leq}0.96$) samples were prepared as polycrystalline thin films on $Al_2O_3$ (0001) substrates, using a sol-gel method. XRD patterns of the nickel-ferrites indicate that as the Ni composition increases (x > 0.3), a structural phase transition takes place from cubic to tetragonal lattice. The XPS results imply that the Ni ions in $Ni_xFe_{3-x}O_4$ substitute for the octahedral sites of the spinel lattice, mostly with the ionic valence of +2. The minority-spin d-electrons of the $Ni^{2+}$ ions are mainly distributed below the Fermi level ($E_F$), at around 3 eV; while those of the $Fe^{2+}$ ions are distributed closer to $E_F$ (~1 eV below $E_F$). The magnetic hysteresis curves of the $Ni_xFe_{3-x}O_4$ films measured by VSM show that as x increases, the saturation magnetization ($M_s$) linearly decreases. The decreasing trend is primarily attributable to the decrease in net spin magnetic moment, by the $Ni^{2+}$ ($2{\mu}_B$) substitution for octahedral $Fe^{2+}$ ($4{\mu}_B$) site.

• 폴리머
• /
• 제24권5호
• /
• pp.728-735
• /
• 2000

지속적인 국소 마취의 가능성을 연구하기 위하여 펜타닐이 함유된 생분해성 poly(L-lactide-glycolide) (75 : 25 락타이드와 글리콜라이드의 몰 비, PLGA) 미립구를 제조하였다. 펜타닐 베이스가 함유된 PLGA 미립구는 일반적인 O/W 용매 증발법으로 제조하였으며 미립구의 크기는 10에서 150 $\mu\textrm{m}$의 범위에 있었다. 미립구의 표면과 단면 형태를 전자현미경으로 관찰하였고 생체외 펜타닐 베이스 방출량은 HPLC로 분석하였다. 젤라틴 유화제의 사용으로 가장 낮은 다공성 단면의 형태와 가장 높은 포접율을 가질 수 있었다. 펜타닐의 방출 패턴은 유화제의 종류, PLGA의 분자량 및 농도, 초기 약물 loading양 등과 같은 제조 조건들의 영향이 미치는 것으로 관찰되었다. 생체외에서 펜타닐 베이스의 방출은 제조 조건을 조절함으로써 거의 zero-order 형태로 25일 이상으로 지속적이었다. 또한 XRD와 DSC로 펜타닐이 함유된 PLGA 미립구의 물리화학적인 성질을 조사하였다.

• 한국재료학회지
• /
• 제19권5호
• /
• pp.253-258
• /
• 2009

Mn-substituted $BiFeO_3$(BFO) thin films were prepared by r.f. magnetron sputtering under an Ar/$O_2$ mixture of various deposition pressures at room temperature. The effects of the deposition pressure and annealing temperature on the crystallization and electrical properties of BFO films were investigated. X-ray diffraction patterns revealed that BFO films were crystallized for films annealed above $500^{\circ}C$. BFO films annealed at $550^{\circ}C$ for 5 min in $N_2$ atmosphere exhibited the crystallized perovskite phase. The (Fe+Mn)/Bi ratio decreased with an increase in the deposition pressure due to the difference of sputtering yield. The grain size and surface roughness of films increased with an increase in the deposition pressure. The dielectric constant of BFO films prepared at various conditions shows $127{\sim}187$ at 1 kHz. The leakage current density of BFO films annealed at $500^{\circ}C$ was approximately two orders of magnitude lower than that of $550^{\circ}C$. The leakage current density of the BFO films deposited at $10{\sim}30\;m$ Torr was about $5{\times}10^{-6}{\sim}3{\times}10^{-2}A/cm^2$ at 100 kV/cm. Due to the high leakage current, saturated P-E curves were not obtained in BFO films. BFO film annealed at $500^{\circ}C$ exhibited remnant polarization(2Pr) of $26.4{\mu}C/cm^2$ at 470 kV/cm.

• Journal of the Optical Society of Korea
• /
• 제9권1호
• /
• pp.16-21
• /
• 2005

Using a cantilever type nanoprobe having a 100㎚m aperture at the apex of the pyramidal tip of a near-field scanning optical microscope (NSOM), nanopatterning of polymer films are conducted. Two different types of polymer, namely a positive photoresist (DPR-i5500) and an azopolymer (Poly disperse orange-3), spincoated on a silicon wafer are used as the substrate. A He-Cd laser with a wavelength of 442㎚ is employed as the illumination source. The optical near-field produced at the tip of the nanoprobe induces a photochemical reaction on the irradiated region, leading to the fabrication of nanostructures below the diffraction limit of the laser light. By controlling the process parameters properly, nanopatterns as small as 100㎚ are produced on both the photoresist and azopolymer samples. The shape and size variations of the nanopatterns are examined with respect to the key process parameters such as laser beam power, irradiation time or scanning speed of the probe, operation modes of the NSOM (DC and AC modes), etc. The characteristic features during the fabrication of ordered structures such as dot or line arrays using NSOM lithography are investigated. Not only the direct writing of nano array structures on the polymer films but also the fabrication of NSOM-written patterns on the silicon substrate were investigated by introducing a passivation layer over the silicon surface. Possible application of thereby developed NSOM lithography technology to the fabrication of data storage is discussed.

• 한국광학회지
• /
• 제6권4호
• /
• pp.288-295
• /
• 1995

무한한 Fresnel number를 갖는 imaging unstable ring resonator에 의한 펄스형 Nd:YAG 레이저 출력 광속의 위상파면을 분석하였다. 본 연구를 위하여 4개의 평면경과 망원경을 포함하는 Negative Branch Unstable Ring Resonator(NBUR) Nd:YAG 레이저를 제작하였다. NBUR 공진기 내에서 증폭되는 광속이 scraper mirror의 원형 투과창을 통해 투과하는 과정에서 발생하는 회절효과는 광학 공진계에 self imaging 조건을 줌으로서 크게 감소시킬 수 있었다. 이러한 self imaging 광속이 고리형 공진계를 반복적으로 진행함으로서 위상파면의 공간적 가간섭성이 향상 되는 것으로 해석 되었다. 레이저 출력 광속의 공간적 위상파면 정보는 Mach-Zehnder 간섭계에 의하여 얻어지는 간섭무늬를 이용하여 얻었으며 이 간섭무늬를 Fourier 변환 방법으로 분석한 결과, 위상파면 왜곡정도가 0.2.lambda.이하 값임을 측정하였다. 이것을 정상파형 레이저 공진기에서의 출력 광속과 비교한 결과 공간적 가간섭성이 75% 정도 향상되었음을 확인하였다.

• 한국광학회지
• /
• 제28권1호
• /
• pp.1-8
• /
• 2017

본 연구에서는 디스플레이 기판의 결함 검출을 위해 푸리에 광학을 이용하는 방법에 대하여 제안하였다. 제안하는 방법은 고배율의 광학계를 사용하지 않기 때문에 비용적 부담이 적은 결함 검출 시스템을 구현하는데 사용될 수 있다. 그리고, 제안하는 방법은 고배율 광학계의 짧은 피사계 심도에 기인하는 기판과 카메라 간의 거리 변화에 대한 엄격한 허용오차를 피할 수 있다. 또한, 카메라와 기판의 가까운 거리로 생기는 접촉으로 인한 손상의 가능성을 피할 수 있다. 푸리에 변환의 특성에 의해 규칙적 패턴인 기판의 위치변화는 회절된 빛의 세기분포에는 영향을 미치지 않기 때문에 검출 알고리즘을 기존의 방식보다 더 간단하게 구현할 수 있다. 제안하는 결함 검출 방법을 전산모사와 함께 설명하고 액정디스플레이의 컬러필터 기판을 예로 실험을 통해 검증하였다.

• 한국재료학회지
• /
• 제11권5호
• /
• pp.413-418
• /
• 2001

황산구리 전해욕에 분산제인 콜리이달 실리카($SiO_2$현탁액)를 첨가시키는 분산도금의 방법을 이용하여 음극에 석출하는 전해 석출물의 결정구조, 표면형상, 결정방향 등의 변화를 검토하였고 내식성, 물리적 특성 또한 조사하였다. 콜로이달 실리카를 분산시킨 구리 전해욕의 석출피막의 특성에 대해서 조사한 결과, 다음과 같은 결론을 얻었다. 전해 석출피막의 결정입자가 미세화 되고, 균일하게 성장됨은 물론, 결정 수가 증가하였으며, 콜로이달 실리카의 분산 효과에 의해서 전해 석출피막의 경도가 대략 16%까지 상승하였다. 또한 콜로이달 실리카를 분산시킨 극리 전착층의 X-선 회절패턴이 (111)면, (200)면과 (311)면이 거의 소멸되어 우선 방위가 (111)에서 (110)면으로 변화되었다. 부식전위의 측면에서도 콜로이달 실리카의 흡착 효과에 의해서 구리 전착층의 전위가 귀하게 이동하는 효과를 얻을 수 있었다.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.288-292
• /
• 2015

New lead-free piezoelectric ceramics $0.96[\{Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}\}_{1-x}La_x(Ti_{1-y}Nb_y)O_3]-0.04SrTiO_3$ (BNKT-ST-LN, where $x=y=0.00{\leq}(x=y){\leq}0.015)$ were synthesized using the conventional solid-state reaction method. Their crystal structure, microstructure, and electrical properties were investigated as a function of the La and Nb (LN) content. The X-ray diffraction patterns revealed the formation of a single-phase perovskite structure for all the LN-modified BNKT-ST ceramics in this study. The temperature dependence of the dielectric curves showed that the maximum dielectric constant temperature ($T_m$) shifted towards lower temperatures and the curves became more diffuse with an increasing LN content. At the optimum composition (LN 0.005), a maximum value of remnant polarization ($33C/cm^2$) with a relatively low coercive field (22 kV/cm) and high piezoelectric constant (215 pC/N) was observed. These results indicate that the LN co-modified BNKT-ST ceramic system is a promising candidate for lead-free piezoelectric materials.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.24-30
• /
• 2013

Today, the modification of carbon foam for high performance remains a major issue in the environment and energy industries. One promising way to solve this problem is the optimization of the pore structure for desired properties as well as for efficient performance. In this study, using a sol-gel process followed by carbonization in an inert atmosphere, hollow spherical carbon foam was prepared using resorcinol and formaldehyde precursors catalyzed by 4-aminobenzoic acid; the effect of carbonization temperature and re-immersion treatment on the pore structure and characteristics of the hollow spherical carbon foam was investigated. As the carbonization temperature increased, the porosity and average pore diameter were found to decrease but the compression strength and electrical conductivity dramatically increased in the temperature range of this study ($700^{\circ}C$ to $850^{\circ}C$). The significant differences of X-ray diffraction patterns obtained from the carbon foams carbonized under different temperatures implied that the degree of crystallinity greatly affects the characteristics of the carbon form. Also, the number of re-impregnations of carbon form in the resorcinol-formaldehyde resin was varied from 1 to 10 times, followed by re-carbonization at $800^{\circ}C$ for 2 hours under argon gas flow. As the number of re-immersion treatments increased, the porosity decreased while the compression strength improved by about four times when re-impregnation was repeated 10 times. These results imply the possibility of customizing the characteristics of carbon foam by controlling the carbonization and re-immersion conditions.