• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.405-413
• /
• 2013

In this paper, a high-reliability differential paired 24-bit eFuse OTP memory with program-verify-read mode for PMICs is designed. In the proposed program-verify-read mode, the eFuse OTP memory can do a sensing margin test with a variable pull-up load in consideration of programmed eFuse resistance variation and can output a comparison result through a PFb (pass fail bar) pin by comparing a programmed datum with its read one. It is verified by simulation results that the sensing resistance is lower with $4k{\Omega}$ in case of the designed differential paired eFuse OTP memory than $50k{\Omega}$ in case of its dual-port eFuse OTP memory.

• The Plant Pathology Journal
• /
• v.26 no.3
• /
• pp.260-263
• /
• 2010

Scald, caused by Rhynchosporium secalis has been the major yield-reducing factor for barley production during the last decade. In this study, pathogenic groups of R. secalis were identified to obtain a global picture of the assembly of isolates involved in Syrian populations which is essential for the development of scald-resistant barley cultivars. To identify a number of pathogenic groups, 49 isolates collected over ten years from major barley growing areas in Syria were evaluated on five differential barley genotypes. Genotypes presented a continuous range of response from highly susceptible to moderately resistant, but none were immune to the disease. A cluster analysis placed isolates in six distinct differential pathogenic groups. Mean disease rating of 39.24% was the separation point between avirulent and virulent reactions. Isolate Rs46 exhibited distinct differential virulence patterns associated with high frequency across all genotypes. Hence, the data presented here provides crucial information for future selection of isolates to develop durable barley scald resistance.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.163-168
• /
• 2009

Negative differential resistance(NDR) behaviors of Keggin-type and Wells-Dawson-type heteropolyacids with cation, heteroatom, and polyatom substitutions were investigated by scanning tunneling microscopy. A reliable correlation between NDR peak voltage and reduction potential of heteropolyacid catalysts was established. It was found that more reducible heteropolyacid catalyst showed NDR behavior at less negative voltage, regardless of the structural difference. Thus, NDR peak voltage of heteropolyacid catalyst could be utilized as a single correlating parameter for the reduction potential of heteropolyacid catalyst.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.1-8
• /
• 2007

The DC characteristics of GaAs Gunn diode are investigated as a preliminary study on the planar grade gap injector GaAs Gunn diode which is the transferred electron device with high output power and dc-rf conversion efficiency. The Gunn devices we fabricated were confirmed to have the DC characteristics of negative differential resistance(NDR). We discussed the nature of the NDR effect, including the electron intervalley transfer; the NDR effect was examined for six different cathode radii.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.111-114
• /
• 2005

Organic monolayers were fabricated onto Au(l l l) substrate by self-assembly method using dipyridinium. Also, organic single molecule in the organic monolayers was selected to measure the current-voltage (I-V) curves by using the ultrahigh vacuum scanning tunneling microscopy (UHV-STM). The organic molecule used in the experiment was dipyridinium dithioacetate, which contains thiol functional group and can be self-assembled easily onto Au(l l l) substrate. The concentration of dipyridinium dithioacetate for self-assembly procedure was I [mM/L]. To confirm the formation of self-assembled mono layers (SAMs), the differences of thickness of the self-assembled organic monolayers were observed by using an ellipsometer, and the morphology and I-V curves of the SAMs were investigated by using UHV-STM. The applied voltages were from -2 [V] to +2 [V], temperature was 300 [K]. The vacuum for measuring current of the organic single molecule was 6 $\times$ 10$^{-8}$ [Torr]. As a result, properties of the negative differential resistance (NDR) in constant voltage were found.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.3 no.4
• /
• pp.5-15
• /
• 1966

The real part of the impedance of dipole antenna is computed rigorously instead of solving a boundary value problem of a partial differential equation. In this paper the resistance of the dipole antennas, whose shape was determined from an ordinary differential equation of first order and the length 2h is in the limits of , were computed and measured. The frequency used was 1500MC and the image screen, 93$\times$93$\textrm{cm}^2$ rectangular aluminium plate, was used for the measurements. The measured resistance was consistent with the theoretical result.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.943-946
• /
• 1989

The channel irregularity of Successive Approximation ADC is very large in comparison with other type of ADCs. This characteristic makes it impossible to apply the Successive Approximation ADC to the field of radiation pulse height analysis or the measurement of probability density function. In this paper, an analysis of differential non-linearity of this ADC-is presented. It is made clear that the small deviation of resistance causes very large differential non-linearity.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.2
• /
• pp.80-86
• /
• 2004

During magnetic inrush or over-excitation, saturation of the core in a transformer draws a large exciting current, which can cause mal-operation of a differential relay. This paper proposes a modified current differential relay for transformer protection. The relay calculates core-loss current from the induced voltage and the core-loss resistance; the relay calculates the magnetizing current from the core flux and the magnetization curve. Finally, the relay obtains the modified differential current by subtracting the core-loss and the magnetizing currents from the conventional differential current. Comparison study with the conventional differential relay with harmonic blocking is also shown. The proposed technique not only discriminates magnetic inrush and over-excitation from an internal fault, but also improves the speed of the conventional relay.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.1
• /
• pp.1-8
• /
• 2005

During magnetic inrush or over-excitation, saturation of the core in a transformer draws a significant exciting current, which can cause malfunction of a current-differential relay. This paper proposes a modified-current-differential relay for transformer protection. The relay calculates the core-loss current from the induced voltage and the core-loss resistance as well as the magnetizing current from the core flux and the magnetization curve. Finally, the relay obtains the modified differential current by subtracting the core-loss and the magnetizing currents from the conventional differential current. A comparative study of the conventional differential relay with harmonic blocking is presented. The proposed relay not only discriminates magnetic inrush and over-excitation from an internal fault, but also improves the relay speed.

• Fire Science and Engineering
• /
• v.28 no.1
• /
• pp.26-30
• /
• 2014

A Compensation-type fire detector (CFD) is operated with two functions of a differential-temperature detector and as a fixed-temperature detector. The differential-temperature detector observes a rate of temperature increase, and the fixed-temperature detector measures a given fixed temperature. The differential-temperature detector does not observe the outbreak of fire in slowly increasing temperature conditions, whereas the fixed-temperature detector is not able to observe the outbreak of fire in conditions under predetermined temperature level. We developed a CFD to compensate for weaknesses of both detectors. To compensate for the disadvantages, a sensor of the sensor metal-insulator-transition critical-temperature sensor was used. Temperature coefficient of resistance is the sensitivity for sensor. At $55^{\circ}C$, temperature coefficient of resistance of metal-insulator-transition critical-temperature sensor was 14.15%. Temperature coefficient of resistance of thermistor was about 0.5%. This CFD was operated as two ways that fixed-temperature detector and differential-temperature detector in one sensor.