• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1218-1223
• /
• 2003

The effects of type (high and low voltages) and time (3, 40 and 60 min postmortem) of stimulation on drip loss and meat color at 24 h post-mortem were determined on M. longissimus dorsi of 38 crossbred steers and heifers. In addition, the effect of pH early postmortem (70 min postmortem) on the rate and extend of meat tenderization was examined. Either high or low voltage stimulation at 3 min showed a tendency for faster pH decline (p=0.052) and higher drip loss (p=0.08), and improved the color dimensions of L*, a* and b* (p<0.01), compared to stimulation at 40 min. This was equivalent to approximately one unit of an AUSMEAT color chip. On the other hand, although there were significant differences in pH decline between high voltage stimulation at 40 and 60 min, and between low voltage stimulation at 40 min and control sides, drip loss and meat color did not differ significantly (p>0.05). The results suggested that early application of stimulation, regardless of type of stimulation, improved overall meat color at 24 h postmortem through its effect on faster glycolysing rate. However, if the pH decline was moderate, the benefit of electrical stimulation on meat color was not apparent. An intermediate pH decline resulted in the lowest shear force. Due to differential ageing rates the optimum pH at 70 min postmortem increased with ageing time from 5.96, 6.07, 6.12 and 6.14 for 1, 3, 7 and 14 days postmortem, respectively. This implied that a small difference in the rate of pH decline was important, especially carcasses stimulated for very early postmortem, and the optimum rate of pH decline varied with intended ageing period. The study suggests that the beneficial or adverse effects of electrical stimulation on drip loss, meat color and tenderness is determined by the rate of pH decline, rather than by stimulation treatment and time of application per se.

• Journal of Korean Society of Forest Science
• /
• v.97 no.4
• /
• pp.392-397
• /
• 2008

To characterize the root strength changes of Pinus densiflora by elapsed years after forest fire, we measured and analyzed the tensile force and strength of the roots using the universal testing machine for 4 years. The deterioration rate of the root strength was higher in small diameter class than that in large diameter class. Especially, the deterioration was highest of the root strength at the second year in all surveyed diameter classes and the mean deterioration rate of the root strength was 61% by that time. The tensile strength based on the simulation by ordinary differential equations deteriorated more than 50% in all diameter classes within 2 years after forest fire.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.369-374
• /
• 2005

In this work, the calcium alginate microcapsules containing lemon oil were prepared by emulsification-internal gelation and their potential use as aromatherapy was examined by the controlled release system. The lemon oil encapsulated in the alginate was successfully observed by Fourier transform (FT-IR) spectroscopy and differential scanning calorimeter (DSC) measurements. Analysis of the diameters and shapes of microcapsules was conducted by scanning electron microscopy (SEM). The mean diameters ranging from 4 to 7 um and encapsulation yield ranging from 50 to $85\%$ were obtained. The controlled release of the lemon oil at $37^{circ}$ was demonstrated by the infrared moisture determination (IMDB). It was found that the amount of released lemon oil decreased with increasing concentrations of alginate and $CaCl_2$ due to the higher the cross-linking density of the capsules prepared. The oil release from the capsule was measured as a function of physical force. We confirmed that the external factor could control the collapse of capsule wall and the release rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2403-2407
• /
• 2012

Finite number of pile elements are considered in load transfer method. And section force and movement of each pile element are computed by considering compatibilities between pile displacement and the load transfer along a pile and between displacement and resistance at the tip of the pile. For the conventional load transfer method, large amount of computations due to iterations are needed. Formulation of finite difference equation from the differential equation which depicts pile behavior under axial loading was accomplished in order to simplify the computation for obtaining pile section forces and displacements. By comparing the results between the simplified computation method and the reported data, there was no difference between the two results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.125-135
• /
• 2011

The latest study for formulation of finite element method and computation techniques has progressed widely. The classical method in the formulation of frame elements for geometrically nonlinear analysis derives the geometric stiffness directly from the governing differential equation for bending with axial force. From the computational viewpoint of this paper, the most common approach is the finite element method. Commonly, the formulation of frame elements for geometrically nonlinear structures is based on appropriate interpolation functions for the transverse and axial displacements of the member. The formulation of flexibility-based elements, on the other hand, is based on interpolation functions for the internal forces. In this paper, a new method is used to suppose that interpolation functions for the displacements from the curvatures is Lagrangian interpolation. This paper derives flexibility matrix from that displacement functions and is considered the application of it. Using the flexibility matrix, this paper apply the program considered geometrically nonlinear analysis to common problems.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.395-399
• /
• 2013

The metallic glass ribbons of $[(Fe_xCo_{1-x})_{0.75}B_{0.2}Si_{0.05}]_{96}Mo_4$ (x = 0, 0.3, 0.6, 0.9 at.%) and $[(Fe_xCo_{1-x})_{0.75}B_{0.2}Si_{0.05}]_{96}Nb_4$ (x = 0, 0.3, 0.6, 0.9 at.%) were obtained by melt spinning with 25-30 ${\mu}m$ thickness. The thermal stability, mechanical properties and magnetic properties of Fe-Co-B-Si based systems were investigated. The values of thermal stability were measured using differential scanning calorimetry (DSC), including glass transition temperature ($T_g$), crystallization temperature ($T_x$) and supercooled liquid region (${\Delta}T_x=T_x-T_g$). These amorphous ribbons were identified as fully amorphous, using X-ray diffraction (XRD). The mechanical properties of Febased samples were measured by nano-indentation. Magnetic properties of the amorphous ribbons were measured by a vibrating sample magnetometer (VSM). The amorphous ribbons of $[(Fe_xCo_{1-x})_{0.75}B_{0.2}Si_{0.05}]_{96}Mo_4$ (x = 0, 0.3, 0.6, 0.9 at.%) and $[(Fe_xCo_{1-x})_{0.75}B_{0.2}Si_{0.05}]_{96}Nb_4$ (x = 0, 0.3, 0.6, 0.9 at.%) exhibited soft magnetic properties with low coercive force ($H_c$) and high saturation magnetization (Ms).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.121-127
• /
• 2007

Direct acting pressure relief valve applicable to propellant tank of launch vehicle is modeled in this study The flow resistance of the partially opened valve is modeled as a function of the distance of the valve stem from the resting position. The position of the valve varies transiently as a function of its mass, the spring force, sliding friction, and the pressure differential. Choking at valve throat and compressibility are considered for the analysis. This study presents systematic analysis method for pressure relief valve applicable to propellant tank of liquid rocket. The results shows transient flow resistance caused by stem motion and the importance of choking at valve throat for pressure relief valve design.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2011

The problems like a deterioration of loading bearing capacity, an exaggeration of settlement and lateral deformation are able to be generated, meanwhile structures are built in soft ground. Top-Base method is belonged to a rigidity mat foundation method which is used to surface treatment of soft ground. This method makes an effect to increase the bearing capacity of foundation using friction force, and prevent the differential settlement. Further more, the In-Situ Top-Base method has advantages in the phase of economic effect by reduction of the construction cost and offers an expediency on construction comparing with precast products. This paper presents the way of the estimation of bearing capacity for In-Situ Top-Base method through field plate load test in soft ground. It utilizes the results to a future design by analyzing the properties in the existing study and designs through these analysis and calculating the top-base method's reasonable range.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.107-115
• /
• 1999

In order to develop a convenient method for the estimation of transport distance of settling stones in quiescent water or flowing water, introduced was the simple but relatively accurate equation of drag coefficient. The equation of drag coefficient introduced was confirmed to give relatively accurate evaluation for the drag force of smooth-surface sphere, and the effects of surface roughness and shape can be considered by adjusting empirical parameters. A theoretical equation has been developed for the settling velocity or settling distance of smooth-surface sphere in quiescent fluid, and the computation results have been obtained by adjusting the empirical parameter for the settling distance of stone in quiescent water. The 2nd order ordinary differential equation has been developed for the case of settling stones in flowing fluid, and a numerical model has been developed by using Runge-Kutta method for its solution. A number of cases have been tested by adjusting the empirical parameter.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.1-10
• /
• 1998

This paper presents a vorticity-based numerical method for analyzing an incompressible Newtonian viscous flow around an impulsively started cylinder. The Navier-Stockes equations have a natural Helmholtz decomposition. The vorticity transport equation and the pressure equation are derived from this decoupled form. The associated boundary conditions are dynamic for the vorticity and pressure variables representing the coupling relation between them and the force balance on the wall. The various numerical treatments for solving the governing equations are introduced. According to Wu et al.(1994), the boundary conditions are decoupled, keeping the dynamic relation between vorticity and pressure. The vorticity transport equation is formulated by FVM and TVD(Total Variation Diminishing) scheme is used for the convection term. An integral approach similar to the panel method is used to obtain the velocity field for a given vorticity field and the pressure field, instead of the conventional differential approaches. In the numerical process, the structured grid is generated. The results are compared to existing numerical and analytic results for the validity of the present method.