• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.157-165
• /
• 2015

Object : The goals of this research were to make Performance Enhanced Model(PE) taken the largest performance index (PI) through artificial variation of principle components calculated by principle component analysis for trial data, and to verify the effect through comparing kinematic factors between trial data (Raw) and PE. Method : Ten subjects (5 men, 5 women) were recruited and 80% of their maximal record was considered. The PI is a regression equation. In order to develop PE, we extracted Principle components from trial position data (by Principle Components Analysis (PCA)). Before PCA, we made 17 position data to 3 row matrix according to components. We calculated 3 eigen value (principle components) through PCA. And except Y (medial-lateral direction) component (because motion of Y component is small), principle components of X (anterior-posterior direction) and Z (vertical direction) components were changed as following. Changed principle components = principle components + principle components ${\times}$ k. After changing the each principle component, we reconstructed position data using the changed principle components and calculated performance index (PI). A Paired t-test was used to compare Raw data and Performance Enhanced Model data. The level of statistical significance was set at $p{\leq}0.05$. Result : The PI was significantly increased about 12.9kg at PE ($101.92{\pm}6.25$) when compared to the Raw data ($91.29{\pm}7.10$). It means that performance can be increased by optimizing 3D positions. The difference of kinematic factors as follows : the movement distance of the bar from start to lock out was significantly larger (about 1cm) for PE, the width of anterior-posterior bar position in full phase was significantly wider (about 1.3cm) for PE and the horizontal displacement toward the weightlifter after beginning of descent from maximal height was significantly greater (about 0.4cm) for PE. Additionally, the minimum knee angle in the 2-pull phase was significantly smaller (approximately 2.7cm) for the PE compared to that of the Raw. PE was decided at proximal position from the Raw (origin point (0,0)) of PC variation). Conclusion : PI was decided at proximal position from the Raw (origin point (0,0)) of PC variation). This means that Performance Enhanced Model was decided by similar motion to the Raw without a great change. Therefore, weightlifters could be accept Performance Enhanced Model easily, comfortably and without large stress. The Performance Enhance Model can provide training direction for athletes to improve their weightlifting records.

• Composites Research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2000

During the compression molding process of the continuous fiber-reinforced polymeric composites, two main problems such as fiber-matrix separation and fiber orientation are produced by the difference of flow velocity. Molded parts are lead to be nonhomogeneous and anisotropic. As the mechanical property of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding condition. If the fiber mat structure is changed by the increment of needling, the separation decreases and after compression molding the orientation is easily aligned. As it were, the compression moldability is good. But the defects as tears, thin thickness are produced in the products. Therefore, it is important to clarify the moldability in relation to the usage of products and the expenses of produce on the actual process. Therefore we must make the measurement methods that can define the moldability of products. In this research, the effects of the fiber mat structure(NP = 0, 5, 10, 25, 50 punches/$cm^2$) and the mold geometry($r_p$ = 1, 25, 50 mm) on the moldability of products were discussed. We investigated the case of one-dimensional flow in order to obtain the degree of nonhomogeneity and the fiber orientation function. In result, we could gain the correlation coefficient of the continuous fiber-reinforced polymeric composites. Also we experimented on the cup-type compression molding which was appeared the wrinkle on the flange part by the complex stress condition in order to gain the degree of nonhomogeneity and area ratio. In result, the moldability of products was expressed as the correlation coefficient and area ratio.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.5
• /
• pp.386-391
• /
• 2010

Introduction: Bone resorption is a unique function of osteoclasts. Osteoclasts are a specialized macrophage polykaryon whose differentiation is regulated principally by macrophage colony-stimulating factors, receptor activator of nuclear factor ${\kappa}B$ ligand (RANK) ligand, osteoprotegerin (OPG), and interleukins (IL). Reflecting the integrin-mediated signals, osteoclasts develop a specialized cytoskeleton that allows it to establish an isolated micro-environment between itself and the bone, wherein matrix degradation occurs by a process involving proton transport. The levels of IL-1, IL-6, OPG, and prostaglandin $E_2$ ($PGE_2$) expression were evaluated to study the correlations between dental implant teeth and the adjacent teeth. Materials and Methods: The exudate of the gingival crevice acquired from dental implants, adjacent teeth, opposite teeth and contralateral teeth of 24 patients. Results: 1. The levels of IL-1, IL-6, OPG and $PGE_2$ expression in dental implant teeth were higher than those of the contralateral teeth. 2. IL-1 revealed a higher expression level in the adjacent teeth than in dental implant teeth. 3. The dental implant teeth and adjacent teeth did not show a remarkable difference in the level of IL-1 expression. 4. All the other cytokines were strongly expressed in the dental implant compared to the adjacent teeth. Conclusion: These results suggest that there might be close correlation between dental implant teeth and adjacent teeth in terms of the expressions of cytokines that affect the development and regulation of osteoclasts.

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.491-504
• /
• 2000

In clinical therapy, the current goal of dental implants is to enhance quantity and quality of osseointegration. Surface roughness and oxide structure are considered to influence the behavior of adherent cells. The purpose of this study is to evaluate the effect of different surface treatment on cellular response. The attachment and proliferation of osteoblast-like cell on sandblasted, sandblasted and etched, thermal oxidated surfaces have been compared. Sandblasting was done with $Al_2O_3$ particles(grain size of $50{\mu}m$), etching was processed with $NH_4OH$ : $H_2O_2$ : $H_2O(1:1:5)$ at $90^{\circ}C$ for 1 minute. Thermal oxidation was followed sandblasting and etching at $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$ for 2 hours. Measurement of surface roughness after the different treatment did not show any differences of Ra value between terated surfaces. Cell attachment and proliferation were increased during experiment period, but no difference was observed. SEM evaluation revealed a similar pattern of osteoblast-like cells, well attached with dendritic extension and producing numerous matrix vesicles on cell surface. The results of this study showed that oxide layer alteration by thermal oxidation did not affect the attachment and proliferation of osteoblast-like cells. This suggests the possibility that the cellular responses are further influenced by surface roughness than titaniun oxide structure.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.121-130
• /
• 2011

Space frame structures have the advantage of constructing a large space structures without column and it may be considered as a shell structure. Nevertheless, with the characteristics of thin and long term of spacing, the unstable problem of space structure could not be set up clearly, and there is a huge difference between theory and experiment. Therefore, in this work, the tangential stiffness matrix of space frame structures is studied to solve the instability problem, and the nonlinear incremental analysis of the structures considering rise-span ratio(${\mu}$) and the ratio of load($R_L$) is performed for searching unstable points. Basing on the results of the example, global buckling can be happened by low rise-span ratio(${\mu}$), nodal buckling can be occurred by high rise-span ratio(${\mu}$). And in case of multi node space structure applying the ratio of load($R_L$), the nodal buckling phenomenon occur at low the ratio of load($R_L$), the global buckling occur a1 high the ratio of load($R_L$). In case of the global buckling, the load of bifurcation is about from 50% to 70% of perfect one's snap-through load.

• Investigative Magnetic Resonance Imaging
• /
• v.11 no.2
• /
• pp.110-118
• /
• 2007

Purpose: The objective of this work to construct eigenvalue maps that have information of magnitude of three primary diffusion directions using diffusion tensor images. Materials and Methods: To construct eigenvalue maps, we used a 3.0T MRI scanner. We also compared the Moore-Penrose pseudo-inverse matrix method and the SVD (single value decomposition) method to calculate magnitude of three primary diffusion directions. Eigenvalue maps were constructed by calculating of magnitude of three primary diffusion directions. We did investigate the relationship between eigenvalue maps and fractional anisotropy map. Results: Using Diffusion Tensor Images by diffusion tensor imaging sequence, we did construct eigenvalue maps of three primary diffusion directions. Comparison between eigenvalue maps and Fractional Anisotropy map shows what is difference of Fractional Anisotropy value in brain anatomy. Furthermore, through the simulation of variable eigenvalues, we confirmed changes of Fractional Anisotropy values by variable eigenvalues. And Fractional anisotropy was not determined by magnitude of each primary diffusion direction, but it was determined by combination of each primary diffusion direction. Conclusion: By construction of eigenvalue maps, we can confirm what is the reason of fractional anisotropy variation by measurement the magnitude of three primary diffusion directions on lesion of brain white matter, using eigenvalue maps and fractional anisotropy map.

• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.661-671
• /
• 2017

The purpose of this study is to compare and analyze the difference between the importance perceived by pre-school teachers and their actual performance in regards to the 7 Guidelines of Safety Education set out by the Ministry of Education, and through the analysis, to identify the items that need priority support and those that need long-term improvement efforts for exemplary safety education for young children. For this, mean average and standard deviation were calculated and paired sample t-test conducted, and IPA(Importance-Performance Analysis) matrix method was performed to analyze the priority and long-term support items and improvement needs. The study results show differences in all areas and all items in the 7 Guidelines of Safety Education by the MoE in the pre-school teachers' perceived importance and actual performance. Areas and items that are identified to be in need of priority support for exemplary safety education in pre-schools; 2 items under 'Violence and Personal Safety' area and I item under 'Substance and Internet Addictions' area. Areas and items that are identified to be in need of long-term improvement efforts are; 6 items under 'First Aid and Emergency Treatment' area, 1 item under 'Violence and Personal Safety' area, 3 items under 'Workplace Safety Culture' area, 3 items under 'Substance and Internet Addictions' area and 1 item under 'Disaster and Safety' area.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.579-587
• /
• 2001

Cleft palate has been studied with epidemiologic and molecular methods, and many etiologic factors have been examined closely Among the research methods, biologic molecule research has been the most important method for cleft palate formation study The $TGF-\beta$ played an important role in cell migration, epithelial-mesenchymal transdifferentiation, extracellular matrix synthesis and deposition. But there was not much research on the correlation cleft palate induced by beta-aminonitroproprionitrile(BAPN) and $TGF-\beta$ expression. The purpose of the present study was to examine how $TGF-\beta$ is expressed in cleft palate rats. 4 Timed-pregnant Sprague-Dawley rats were obtained on the 10th gestation day. On the 13th day of gestation, BAPN-monofumarate salts (${(C_3H_6N_2)}_2{\cdot}C_4H_4O_4$) were individually, ovally administered to 3 pregnant rats at a ratio of 1g/kg body weight. And 4 pregnant rats were sacrificed on day 20 post coitus (p.c.). The $TGF-\beta$ expression in the cleft formed rats fetuses showed the following patterns : 1. Osteoblast and mesenchymal cells of the cleft pa)ate rats were of low expression compared with those of the control rats. 2. The cleft palate rats didn't show uy difference in the $TGF-\beta$ expression of osteocyte item the control rats. 3. In western blot analysis, the thickness of band of $TGF-\beta$ in the cleft palate rats was thinner and more diluted than that of the control rats.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.103-111
• /
• 2011

Purpose: Choukroun's platelet-rich-fibrin (PRF) is composed of platelets, white blood cells and fibrin matrix. It does not induce enough bone formation by itself but it can improve bone formation with calcium. Silk fibroin does not cause inflammatory reactions because it is bio-compatible and degradable. The purpose of this study was to exam the bone formation when a combination of Choukroun's PRF and silk fibroin was used. Methods: In this study, cell reactions to silk powder with differing molecular weights was first tested to select the appropriate silk powder. Then we applied these bone graft materials on defects of skull and in a peri-implant bony defect model in New Zealand rabbits. The results between the experimental and control s (non-grafted) group were analyzed. Results: The small sized silk fibroin powder showed increased cellular proliferation for bone-regeneration. There was no statistically significant difference between the experimental group and the control group at 6 weeks, but more new bone formation was observed in the combination graft group at 12 weeks (P<0.05). And in the dental implant model, the combination bone graft group showed much improved torque test results, which was statistically significant. Histomorphometric analysis showed more regenerated cortical bone and a higher mean bone to implant in the experimental group. Both were statistically significant. Conclusion: The combination graft of Choukroun's platelet-rich-fibrin (PRF) and silk fibroin powder can successfully restore the bony defects in a skull defected model and a peri-implant bony defects model.

• The Korean Journal of Elementary Counseling
• /
• v.7 no.2
• /
• pp.169-180
• /
• 2008

The purpose of this study is to train peercounselors within the minimum period and use them as mentors for rejected children in order to raise the social status of those children. To do so, five mentors were assigned to five rejected children but their social status did not show significant difference. Not only that, even the social status of the mentors was decreased so the primary purpose of this study was not achieved. However, the activities in the class such as the mentor activity increased the choices that students can get. These changes were definite in the male student groups rather in female student groups. Female students had their own way of change and direction regardless of the class activities. Therefore, there is a possibility that 5th graders in the elementary school have different classroom dynamics according to their genders. The different classroom dynamic by genders and the choice and direction of rejection shown in the matrix table indicate that it is proper to use same-sex peer nomination for sociometry. Also, the results of this study raise the necessity for further studies regarding individual approaches for rejected children and the intervention methods that teachers use for those children.