• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.534-538
• /
• 2016

This paper discusses the characteristics and effects of dielectric inner-supports on discone antenna for broadband RF test chamber, and the verification has been performed by simulation. Several design parameters such as the thickness of the gap support, the position of the side support, and the thickness of the side support has been analyzed. The thickness of the gap support affected the reflection coefficient. An effect of the offset of the side support from the center was slight below 3 GHz and significant above 3 GHz. The thickness of the side support did not affect the reflection coefficient or the gain much. The performance of the fabricated discone antenna was in good agreement with the simulated results. This investigation of a dielectric support effects could be used to design a commercial discone antenna for broadband RF test chamber, focusing on electrical performance and mechanical stability.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.478-480
• /
• 2002

Heating by RF wave is divided into dielectric heating and induction heating. Dielectric heating and induction heating from outside the body have the compensatory heating pattern. While surface fat layer is heated by dielectric heating, it is not heated by induction heating. While the peripheral part at the middle of the electrodes is not heated by dielectric heating, it is heated by induction heating. By the simultaneous application both modalities, heating pattern seems to be more uniform and improved. Computer simulation of Finite Element Method (FEM) using ANSYS was conducted to dielectric heating with the results of above-mentioned feature. Theoretical considerations by the uniform RF magnetic field in a cylinder and textbooks support the feature of the above-mentioned heating pattern of induction heating. Further computer simulation of FEM using ANSYS will be conducted to simultaneous application of dielectric heating and induction heating to verify and will be reported.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.206-210
• /
• 1996

In order to investigate the electrical properties for transformer oils which contains a Pure sodium chloride, the dielectric properties is made researches. To measure the dielectric loss of specimen, a coaxial cylindrical liquid electrode is used, and its geometric capacitance is confirmed to 16[pF]. And the dielectric dissipation factor, tan$\delta$, is measured by using the Video Bridge 2150. The thermal static oven with an automatically static temperature controller is used so as to support specific temperature to the specimen. This experiments for measuring the dielectric lass is performed at 20-120[$^{\circ}C$] in the temperature range, 30∼1.5x10$\^$5/[Hz] in the frequency range and 300∼1500[mV] in the voltage range. The result of experiment for the movement of carrier and the physical constants to contribute dielectric properties of specimen with a pure sodium chloride.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.181-186
• /
• 2005

We demonstrate that the finite rate of dielectric relaxation in liquid crystals which has been ignored previously causes profound effects in the fast dielectric reorientation of the director. The phenomenon is relevant for submillisecond switching of the director when the switching rate approaches the rate of dielectric relaxation through the reorientation of the molecular dipoles. A submillisecond switching ($15-400\;{\mu}s$ for an optical retardation shift $0.3-2.2\;{\mu}m$ in $10-15\;{\mu}m$ thick cells) is demonstrated for dual frequency nematic cells with high pretilt that maximizes the dielectric torque acting on the director. We propose the theory of dielectric response in which the electric displacement depends not only on the present (as in the standard theory) but also on the past values of electric field and director. We design an experiment in which the standard "instantaneous" model and our model predict effects of opposite signs; the experimental data support the latter model.

• 한국항행학회논문지
• /
• 제9권2호
• /
• pp.147-155
• /
• 2005

본 논문에서는 기존 코플래나 웨이브가이드(CPW), 유한접지(FG) CPW, 그리고 접지(G) CPW와 같은 세 종류의 균일단면 구조의 CPW와 $TE_{01{\delta}}$ 모드 유전체공진기(DR : Dielectric Resonator)간의 결합 특성을 연구하고 마이크로스트립과 DR과의 결합과 같은 병렬 공진 특성을 보이는 CPW 와 DR간의 결합회로의 설계 방법을 제안한다. 결합 특성은 DR을 CPW의 접지와 신호선사이의 두 간격 중의 하나의 중심 상에 유전체 지지대(Support)를 이용하여 위치시키고 접지 방향으로 이동하면서 연구되었다. HFSS(High Frequency Structure Simulator : Finite Element Method Commercial Tool)의 시뮬레이션과 측정된 S-파라미터 값은 잘 일치했다. 마지막으로, 위에서 언급한 세 종류의 CPW와 DR과의 결합과 마이크로스트립라인과 DR과의 결합을 무부하 품질계수인 $Q_u$를 이용하여 비교하였다. 비교결과 CPW와 DR과의 결합은 마이크로스트립라인과 DR과의 결합보다 높은 $Q_u$ 값을 나타냈고 그 중에서 GCPW와 DR과의 결합이 가장 높은 $Q_u$를 보여줬다.

• 한국통신학회논문지
• /
• 제11권1호
• /
• pp.48-52
• /
• 1986

유전체 공진기를 실제로 사용할 때 발생하는 여러가지 영향을 고려한 원통형 유전체공진기의 공진주파수 및 field계수를 결정하기 위한 보다 효율적인 수치해석법과 컴퓨터프로그램을 개발했다. 이 새로운 해석법에는 차폐금속면, 마이크로스트림 substrate, 유전체지지대 및 유전체공진기의 제작시 발생되는 허용오차를 보상하기 위한 유전체 post 등의 영향이 고려됐다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.118-118
• /
• 2000

We investigate Frohlich-like electron--optical-phonon interactionsin uniaxial crytals based on the macroscopic dielectric continuum model. In general, the optical-phonon branches support mixed longitudinal and transverse modes due to the anisotropy. For heterostructures with double interfaces and superlattices, it is known that confined, interface, and half-space optical phonon modes exist in zincblende cystals. In uniaxial structures, additional propagating modes may exist in wurtzite heterosystems due to anisotropic phonon dispersion. This is especially the case when the dielectric properties of the adjacent heterostructure materials do not differ substantially. The dispersion relations and the interaction Hamiltonians for each of these modes are derived.

• Macromolecular Research
• /
• 제10권4호
• /
• pp.215-220
• /
• 2002

The electrorheological (ER) and dielectric behaviors of the polypyrrole(PPy)-coated poly(ethyl methacrylate)(PEMA) suspensions in mineral oil were investigated. PPy was coated on PEMA particles to enhance the particle polarization, which would lead to the enhanced ER response. Various PPy-coated PEMA particles were synthesized by controlling the oxidant amount during the pyrrole polymerization, and the ER responses of their suspensions were investigated. The ER response initially increases with the oxidant amount, passes through a maximum, and then decreases with the oxidant amount. The initial increase in the ER response with oxidant amounts is due to the enhanced particle polarization with the increased particle surface conductivity. The dielectric properties of the corresponding suspensions support that the ER enhancement arises from the enhanced particle polarization. The decrease in the ER response at large oxidant amounts seems to arise from the increased conduction between the PPy-coated PEMA particles.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.458-463
• /
• 1995

The optical and electrical properties of $C_{22}$-Quinolinium(TCNQ) Langmuir-Blodgett films have been studied depending on the annealing temperatures. The optimal properties were investigated using UV/visible(300-800[nm]) absorption spectra and FTIR(Fourier-transformed- infrared) absorption measurements. The electrical properties were investigated in a frequency range of 10[Hz]-13[MHz]. The UV/visible absorption spectra at room temperature show that there are four characteristic peaks at 320, 380, 494 and 678[nm]. These absorption peaks decrease very rapidly above the annealing temperature of 180[.deg. C], which is due to a structural change of TCNQ. The FTIR absorption measurements strongly support the result of the UV/visible absorption spectra, because the absorption peak of TCNQ- at 2181[$cm^{-1}$ /] also decreases above 140[.deg. C]. The frequency-dependent dielectric constant shows that there is a dielectric dispersion near 1[MHz] which is due to an orientational polarization of the molecules inside the film. The overall frequency-dependent dielectric constant is higher near 80[.deg. C]. It may be due to a softness of the alkyl chains.s.

• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.631-636
• /
• 2010

Gas-insulated transmission lines (GITL) are valued as technological solutions in hydro-power stations due to their enormous power handling capabilities. The performance of GITL is a function of the size of metallic particles inside the gas-insulated chamber. Electrostatic field (E-field) enhancement is a common phenomenon in gas-insulated lines due to these metallic particles. In this study, the E-field enhancement factor is calculated by considering metallic particles at various locations in the gas-insulated line/bus section, such as high-tension (HT) conductor, high-voltage shields, support insulator, and inner surface of grounded enclosure. For this purpose, a two-dimensional model based on finite element (FE) method is developed. The length of the metallic particle is in the range of 1 to 10 mm while the diameter is between 1 to 3 mm. E-field enhancement is also computed for various particle configurations of the gas-insulated system, with focus on dielectric coating made of epoxy on HT conductor and inner surface of grounded enclosure.